aboutgitcodebugslistschat
path: root/util.c
Commit message (Collapse)AuthorAgeFilesLines
* util: fix confusion between offset in the iovec array and in the entry2024_03_20.71dd405Laurent Vivier2024-03-201-4/+5
| | | | | | | | | | | | | | | | | | | | In write_remainder() 'skip' is the offset to start the operation from in the iovec array. In iov_skip_bytes(), 'skip' is also the offset in the iovec array but 'offset' is the first unskipped byte in the iovec entry. As write_remainder() uses 'skip' for both, 'skip' is reset to the first unskipped byte in the iovec entry rather to staying the first unskipped byte in the iovec array. Fix the problem by introducing a new variable not to overwrite 'skip' on each loop. Fixes: 8bdb0883b441 ("util: Add write_remainder() helper") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Use 'flowside' epoll references for ping socketsDavid Gibson2024-03-121-3/+1
| | | | | | | | | | | | | | | | Currently ping sockets use a custom epoll reference type which includes the ICMP id. However, now that we have entries in the flow table for ping flows, finding that is sufficient to get everything else we want, including the id. Therefore remove the icmp_epoll_ref type and use the general 'flowside' field for ping sockets. Having done this we no longer need separate EPOLL_TYPE_ICMP and EPOLL_TYPE_ICMPV6 reference types, because we can easily determine which case we have from the flow type. Merge both types into EPOLL_TYPE_PING. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: move IP stuff from util.[ch] to ip.[ch]Laurent Vivier2024-03-061-55/+0
| | | | | | | | | | | | Introduce ip.[ch] file to encapsulate IP protocol handling functions and structures. Modify various files to include the new header ip.h when it's needed. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-ID: <20240303135114.1023026-5-lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Add write_remainder() helperDavid Gibson2024-02-291-0/+35
| | | | | | | | | | | | | | | | | We have several places where we want to write(2) a buffer or buffers and we handle short write()s by retrying until everything is successfully written. Add a helper for this in util.c. This version has some differences from the typical write_all() function. First, take an IO vector rather than a single buffer, because that will be useful for some of our cases. Second, allow it to take an parameter to skip the first n bytes of the given buffers. This will be useful for some of the cases we want, and also falls out quite naturally from the implementation. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Minor formatting fixes in write_remainder()] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Use sa_family_t for address family variablesDavid Gibson2024-02-271-1/+1
| | | | | | | | | | Sometimes we use sa_family_t for variables and parameters containing a socket address family, other times we use a plain int. Since sa_family_t is what's actually used in struct sockaddr and friends, standardise on that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Make a bunch of pointer variables pointers to constDavid Gibson2024-01-161-2/+2
| | | | | | | | | | Sufficiently recent cppcheck (I'm using 2.13.0) seems to have added another warning for pointer variables which could be pointer to const but aren't. Use this to make a bunch of variables const pointers where they previously weren't for no particular reason. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Make sock_l4() treat empty string ifname like NULLDavid Gibson2023-12-271-1/+1
| | | | | | | | | | | sock_l4() takes NULL for ifname if you don't want to bind the socket to a particular interface. However, for a number of the callers, it's more natural to use an empty string for that case. Change sock_l4() to accept either NULL or an empty string equivalently, and simplify some callers using that change. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Avoid in_addr_tDavid Gibson2023-12-271-1/+1
| | | | | | | | | | | | | | | IPv4 addresses can be stored in an in_addr_t or a struct in_addr. The former is just a type alias to a 32-bit integer, so doesn't really give us any type checking. Therefore we generally prefer the structure, since we mostly want to treat IP address as opaque objects. Fix a few places where we still use in_addr_t, but can just as easily use struct in_addr. Note there are still some uses of in_addr_t in conf.c, but those are justified: since they're doing prefix calculations, they actually need to look at the internals of the address as an integer. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Drop explicit setting to INADDR_ANY/in6addr_any in sock_l4()David Gibson2023-12-271-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original commit message says: --- Currently we initialise the address field of the sockaddrs we construct to the any/unspecified address, but not in a very clear way: we use explicit 0 values, which is only interpretable if you know the order of fields in the sockaddr structures. Use explicit field names, and explicit initialiser macros for the address. Because we initialise to this default value, we don't need to explicitly set the any/unspecified address later on if the caller didn't pass an overriding bind address. --- and the original patch modified the initialisation of addr4 and addr6: - instead of { 0 }, { 0 } for sin_addr and sin_zero, .sin_addr = IN4ADDR_ANY_INIT - instead of 0, IN6ADDR_ANY_INIT, 0: .sin6_addr = IN6ADDR_ANY_INIT but I dropped those hunks: they break gcc versions 7 to 9 as reported in eed6933e6c29 ("udp: Explicitly initialise sin6_scope_id and sin_zero in sockaddr_in{,6}"). I applied the rest of the changes. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Dropped first two hunks] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* port_fwd, util: Don't bind UDP ports with opposite-side bound TCP portsStefano Brivio2023-11-221-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When pasta periodically scans bound ports and binds them on the other side in order to forward traffic, we bind UDP ports for corresponding TCP port numbers, too, to support protocols and applications such as iperf3 which use UDP port numbers matching the ones used by the TCP data connection. If we scan UDP ports in order to bind UDP ports, we skip detection of the UDP ports we already bound ourselves, to avoid looping back our own ports. Same with scanning and binding TCP ports. But if we scan for TCP ports in order to bind UDP ports, we need to skip bound TCP ports too, otherwise, as David pointed out: - we find a bound TCP port on side A, and bind the corresponding TCP and UDP ports on side B - at the next periodic scan, we find that UDP port bound on side B, and we bind the corresponding UDP port on side A - at this point, we unbind that UDP port on side B: we would otherwise loop back our own port. To fix this, we need to avoid binding UDP ports that we already bound, on the other side, as a consequence of finding a corresponding bound TCP port. Reproducing this issue is straightforward: ./pasta -- iperf3 -s # Wait one second, then from another terminal: iperf3 -c ::1 -u Reported-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp> Analysed-by: David Gibson <david@gibson.dropbear.id.au> Fixes: 457ff122e33c ("udp,pasta: Periodically scan for ports to automatically forward") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Add open_in_ns() helperDavid Gibson2023-11-071-0/+53
| | | | | | | | | | Most of our helpers which need to enter the pasta network namespace are quite specialised. Add one which is rather general - it just open()s a given file in the namespace context and returns the fd back to the main namespace. This will have some future uses. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* port_fwd: Move automatic port forwarding code to port_fwd.[ch]David Gibson2023-11-071-64/+1
| | | | | | | | | | | | | The implementation of scanning /proc files to do automatic port forwarding is a bit awkwardly split between procfs_scan_listen() in util.c, get_bound_ports() and related functions in conf.c and the initial setup code in conf(). Consolidate all of this into port_fwd.h, which already has some related definitions, and a new port_fwd.c. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* cppcheck: Make many pointers constDavid Gibson2023-10-041-2/+3
| | | | | | | | | Newer versions of cppcheck (as of 2.12.0, at least) added a warning for pointers which could be declared to point at const data, but aren't. Based on that, make many pointers throughout the codebase const. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Avoid shadowing index(3)David Gibson2023-09-271-6/+6
| | | | | | | | | | | | | | | | | A classic gotcha of the standard C library is that its unwise to call any variable 'index' because it will shadow the standard string library function index(3). This can cause warnings from cppcheck amongst others, and it also means that if the variable is removed you tend to get confusing type errors (or sometimes nothing at all) instead of a nice simple "name is not defined" error. Strictly speaking this only occurs if <string.h> is included, but that is so common that as a rule it's best to just avoid it always. We have a number of places which hit this trap, so rename variables and parameters to avoid it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Split handling of listening TCP sockets into their own handlerDavid Gibson2023-08-131-1/+1
| | | | | | | | | | | | | | | | | tcp_sock_handler() handles both listening TCP sockets, and connected TCP sockets, but what it needs to do in those cases has essentially nothing in common. Therefore, give listening sockets their own epoll_type value and dispatch directly to their own handler from the top level. Furthermore, the two handlers need essentially entirely different information from the reference: we re-(ab)used the index field in the tcp_epoll_ref to indicate the port for the listening socket, but that's not the same meaning. So, switch listening sockets to their own reference type which we can lay out as we please. That lets us remove the listen and outbound fields from the normal (connected) tcp_epoll_ref, reducing it to just the connection table index. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Generalize epoll_ref to cover things other than socketsDavid Gibson2023-08-131-7/+20
| | | | | | | | | | | | | | The epoll_ref type includes fields for the IP protocol of a socket, and the socket fd. However, we already have a few things in the epoll which aren't protocol sockets, and we may have more in future. Rename these fields to an abstract "fd type" and file descriptor for more generality. Similarly, rather than using existing IP protocol numbers for the type, introduce our own number space. For now these just correspond to the supported protocols, but we'll expand on that in future. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Make ns_enter() a void function and report setns() errorsDavid Gibson2023-08-041-5/+3
| | | | | | | | | | | | | | | | ns_enter() returns an integer... but it's always zero. If we actually fail the function doesn't return. Therefore it makes more sense for this to be a function returning void, and we can remove the cases where we pointlessly checked its return value. In addition ns_enter() is usually called from an ephemeral thread created by NS_CALL(). That means that the exit(EXIT_FAILURE) there usually won't be reported (since NS_CALL() doesn't wait() for the thread). So, use die() instead to print out some information in the unlikely event that our setns() here does fail. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Use C11 anonymous members to make poll refs less verbose to useDavid Gibson2023-08-041-2/+2
| | | | | | | | | | | | union epoll_ref has a deeply nested set of structs and unions to let us subdivide it into the various different fields we want. This means that referencing elements can involve an awkward long string of intermediate fields. Using C11 anonymous structs and unions lets us do this less clumsily. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util, conf: Add and use ns_is_init() helperStefano Brivio2023-05-231-0/+25
| | | | | | | | | | We'll need this in isolate_initial(). While at it, don't rely on BUFSIZ: the earlier issue we had with musl reminded me it's not a magic "everything will fit" value. Size the read buffer to what we actually need from uid_map, and check for the final newline too, because uid_map is organised in lines. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Relicense to GPL 2.0, or any later versionStefano Brivio2023-04-061-1/+1
| | | | | | | | | | | | | | | | | | | In practical terms, passt doesn't benefit from the additional protection offered by the AGPL over the GPL, because it's not suitable to be executed over a computer network. Further, restricting the distribution under the version 3 of the GPL wouldn't provide any practical advantage either, as long as the passt codebase is concerned, and might cause unnecessary compatibility dilemmas. Change licensing terms to the GNU General Public License Version 2, or any later version, with written permission from all current and past contributors, namely: myself, David Gibson, Laine Stump, Andrea Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, udp, util: Pass socket creation errors all the way upStefano Brivio2023-03-091-13/+18
| | | | | | | | | ...starting from sock_l4(), pass negative error (errno) codes instead of -1. They will only be used in two commits from now, no functional changes intended here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* treewide: Fix header includes to build with muslChris Kuhn2023-03-091-0/+1
| | | | | | | | | | | | | | | Roughly inspired from a patch by Chris Kuhn: fix up includes so that we can build against musl: glibc is more lenient as headers generally include a larger amount of other headers. Compared to the original patch, I only included what was needed directly in C files, instead of adding blanket includes in local header files. It's a bit more involved, but more consistent with the current (not ideal) situation. Reported-by: Chris Kuhn <kuhnchris+github@kuhnchris.eu> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* util: Add own prototype for __clone2() on ia642023_02_27.c538ee8Stefano Brivio2023-02-271-0/+9
| | | | | | | | | | | | | ia64 needs to use __clone2() as clone() is not available, but glibc doesn't export the prototype. Take it from clone(2) to avoid an implicit declaration: util.c: In function ‘do_clone’: util.c:512:16: warning: implicit declaration of function ‘__clone2’ [-Wimplicit-function-declaration] 512 | return __clone2(fn, stack_area + stack_size / 2, stack_size / 2, | ^~~~~~~~ Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Make assertions actually usefulDavid Gibson2023-02-121-1/+0
| | | | | | | | | | | | | | | | | | There are some places in passt/pasta which #include <assert.h> and make various assertions. If we hit these something has already gone wrong, but they're there so that we a useful message instead of cryptic misbehaviour if assumptions we thought were correct turn out not to be. Except.. the glibc implementation of assert() uses syscalls that aren't in our seccomp filter, so we'll get a SIGSYS before it actually prints the message. Work around this by adding our own ASSERT() implementation using our existing err() function to log the message, and an abort(). The abort() probably also won't work exactly right with seccomp, but once we've printed the message, dying with a SIGSYS works just as well as dying with a SIGABRT. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Always return -1 on error in sock_l4()David Gibson2022-11-251-1/+1
| | | | | | | | | According to its doc comments, sock_l4() returns -1 on error. It does, except in one case where it returns -EIO. Fix this inconsistency to match the docs and always return -1. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Allow sock_l4() to open dual stack socketsDavid Gibson2022-11-251-2/+15
| | | | | | | | | | | | | | | Currently, when instructed to open an IPv6 socket, sock_l4() explicitly sets the IPV6_V6ONLY socket option so that the socket will only respond to IPv6 connections. Linux (and probably other platforms) allow "dual stack" sockets: IPv6 sockets which can also accept IPv4 connections. Extend sock_l4() to be able to make such sockets, by passing AF_UNSPEC as the address family and no bind address (binding to a specific address would defeat the purpose). We add a Makefile define 'DUAL_STACK_SOCKETS' to indicate availability of this feature on the target platform. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util, pasta: Add do_clone() wrapper around __clone2() and clone()Stefano Brivio2022-11-161-0/+21
| | | | | | | | | | | | | | | Spotted in Debian's buildd logs: on ia64, clone(2) is not available: the glibc wrapper is named __clone2() and it takes, additionally, the size of the stack area passed by the caller. Add a do_clone() wrapper handling the different cases, and also taking care of pointing the child's stack in the middle of the allocated area: on PA-RISC (hppa), handled by clone(), the stack grows up, and on ia64 the stack grows down, but the register backing store grows up -- and I think it might be actually used here. Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* arp, tap, util: Don't use perror() after seccomp filter is installedStefano Brivio2022-11-161-3/+3
| | | | | | | | | | | | | | | If stderr is closed, after we fork to background, glibc's implementation of perror() will try to re-open it by calling dup(), upon which the seccomp filter causes the process to terminate, because dup() is not included in the list of allowed syscalls. Replace perror() calls that might happen after isolation_postfork(). We could probably replace all of them, but early ones need a bit more attention as we have to check whether log.c functions work in early stages. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* Replace FWRITE with a functionDavid Gibson2022-10-151-0/+33
| | | | | | | | | | | | | | In a few places we use the FWRITE() macro to open a file, replace it's contents with a given string and close it again. There's no real reason this needs to be a macro rather than just a function though. Turn it into a function 'write_file()' and make some ancillary cleanups while we're there: - Add a return code so the caller can handle giving a useful error message - Handle the case of short write()s (unlikely, but possible) - Add O_TRUNC, to make sure we replace the existing contents entirely Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, tcp, udp: Allow specification of interface to bind toStefano Brivio2022-10-151-1/+18
| | | | | | | | | | | | | | | | Since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can bind sockets to interfaces, if they haven't been bound yet (as in bind()). Introduce an optional interface specification for forwarded ports, prefixed by %, that can be passed together with an address. Reported use case: running local services that use ports we want to have externally forwarded: https://github.com/containers/podman/issues/14425 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* util: Check return value of lseek() while reading bound ports from procfsStefano Brivio2022-10-151-3/+7
| | | | | | | | | Coverity now noticed we're checking most lseek() return values, but not this. Not really relevant, but it doesn't hurt to check we can actually seek before reading lines. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* Move logging functions to a new file, log.cStefano Brivio2022-10-141-120/+1
| | | | | | | | Logging to file is going to add some further complexity that we don't want to squeeze into util.c. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* clang-tidy: Suppress warning about unchecked error in logfn macroDavid Gibson2022-09-291-1/+1
| | | | | | | | | clang-tidy complains that we're not checking the result of vfprintf in logfn(). There's not really anything we can do if this fails here, so just suppress the error with a cast to void. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Handle userns isolation and dropping root at the same timeDavid Gibson2022-09-131-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | passt/pasta can interact with user namespaces in a number of ways: 1) With --netns-only we'll remain in our original user namespace 2) With --userns or a PID option to pasta we'll join either the given user namespace or that of the PID 3) When pasta spawns a shell or command we'll start a new user namespace for the command and then join it 4) With passt we'll create a new user namespace when we sandbox() ourself However (3) and (4) turn out to have essentially the same effect. In both cases we create one new user namespace. The spawned command starts there, and passt/pasta itself will live there from sandbox() onwards. Because of this, we can simplify user namespace handling by moving the userns handling earlier, to the same point we drop root in the original namespace. Extend the drop_user() function to isolate_user() which does both. After switching UID and GID in the original userns, isolate_user() will either join or create the userns we require. When we spawn a command with pasta_start_ns()/pasta_setup_ns() we no longer need to create a userns, because we're already made one. sandbox() likewise no longer needs to create (or join) an userns because we're already in the one we need. We no longer need c->pasta_userns_fd, since the fd is only used locally in isolate_user(). Likewise we can replace c->netns_only with a local in conf(), since it's not used outside there. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Move self-isolation code into a separate fileDavid Gibson2022-09-131-51/+0
| | | | | | | | passt/pasta contains a number of routines designed to isolate passt from the rest of the system for security. These are spread through util.c and passt.c. Move them together into a new isolation.c file. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Consolidate determination of UID/GID to run asDavid Gibson2022-09-131-50/+0
| | | | | | | | | | | | Currently the logic to work out what UID and GID we will run as is spread across conf(). If --runas is specified it's handled in conf_runas(), otherwise it's handled by check_root(), which depends on initialization of the uid and gid variables by either conf() itself or conf_runas(). Make this clearer by putting all the UID and GID logic into a single conf_ugid() function. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Split checking for root from dropping root privilegeDavid Gibson2022-09-131-3/+26
| | | | | | | | | | | | | | | | | | check_root() both checks to see if we are root (in the init namespace), and if we are drops to an unprivileged user. To make future cleanups simpler, split the checking for root (now in check_root()) from the actual dropping of privilege (now in drop_root()). Note that this does slightly alter semantics. Previously we would only setuid() if we were originally root (in the init namespace). Now we will always setuid() and setgid(), though it won't actually change anything if we weren't privileged to begin with. This also means that we will now always attempt to switch to the user specified with --runas, even if we aren't (init namespace) root to begin with. Obviously this will fail with an error if we weren't privileged to start with. --help and the man page are updated accordingly. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Don't store UID & GID persistently in the context structureDavid Gibson2022-09-131-6/+6
| | | | | | | | c->uid and c->gid are first set in conf(), and last used in check_root() itself called from conf(). Therefore these don't need to be fields in the long lived context structure and can instead be locals in conf(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* util: Drop any supplementary group before dropping privilegesStefano Brivio2022-08-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | Commit a951e0b9efcb ("conf: Add --runas option, changing to given UID and GID if started as root") dropped the call to initgroups() that used to add supplementary groups corresponding to the user we'll eventually run as -- we don't need those. However, if the original user belongs to supplementary groups (usually not the case, if started as root), we don't drop those, now, and rpmlint says: passt.x86_64: E: missing-call-to-setgroups-before-setuid /usr/bin/passt passt.x86_64: E: missing-call-to-setgroups-before-setuid /usr/bin/passt.avx2 Add a call to setgroups() with an empty set, to drop any supplementary group we might currently have, before changing GID and UID. Reported-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* Make substructures for IPv4 and IPv6 specific context informationDavid Gibson2022-07-301-2/+2
| | | | | | | | | | | | The context structure contains a batch of fields specific to IPv4 and to IPv6 connectivity. Split those out into a sub-structure. This allows the conf_ip4() and conf_ip6() functions, which take the entire context but touch very little of it, to be given more specific parameters, making it clearer what it affects without stepping through the code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Allow different external interfaces for IPv4 and IPv6 connectivityDavid Gibson2022-07-301-1/+1
| | | | | | | | | | | | | | | | It's quite plausible for a host to have both IPv4 and IPv6 connectivity, but only via different interfaces. For example, this will happen in the case that IPv6 connectivity is via a tunnel (e.g. 6in4 or 6rd). It would also happen in the case that IPv4 access is via a tunnel on an otherwise IPv6 only local network, which is a setup that might become more common in the post IPv4 address exhaustion world. In turns out there's no real need for passt/pasta to get its IPv4 and IPv6 connectivity via the same interface, so we can handle this situation fairly easily. Change the core to allow eparate external interfaces for IPv4 and IPv6. We don't actually set these separately for now. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* util: Fix debug print on failed SO_REUSEADDR setting in sock_l4()Stefano Brivio2022-07-141-1/+1
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Remove unused line_read()David Gibson2022-07-061-54/+0
| | | | | | The old, ugly implementation of line_read() is no longer used. Remove it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Use new lineread implementation for procfs_scan_listen()David Gibson2022-07-061-4/+6
| | | | | | | Use the new more solid implementation of line by line reading for procfs_scan_listen(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* conf: Add --runas option, changing to given UID and GID if started as rootStefano Brivio2022-05-191-0/+52
| | | | | | | | | | | | | | On some systems, user and group "nobody" might not be available. The new --runas option allows to override the default "nobody" choice if started as root. Now that we allow this, drop the initgroups() call that was used to add any additional groups for the given user, as that might now grant unnecessarily broad permissions. For instance, several distributions have a "kvm" group to allow regular user access to /dev/kvm, and we don't need that in passt or pasta. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, tcp, udp: Allow address specification for forwarded portsStefano Brivio2022-05-011-15/+12
| | | | | | | | | | | | | This feature is available in slirp4netns but was missing in passt and pasta. Given that we don't do dynamic memory allocation, we need to bind sockets while parsing port configuration. This means we need to process all other options first, as they might affect addressing and IP version support. It also implies a minor rework of how TCP and UDP implementations bind sockets. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Unchecked return value from library, CWE-252Stefano Brivio2022-04-071-4/+7
| | | | | | | All instances were harmless, but it might be useful to have some debug messages here and there. Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Fix android-cloexec-* clang-tidy warnings, re-enable checksStefano Brivio2022-03-291-1/+1
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Mark constant references as constStefano Brivio2022-03-291-4/+4
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Packet abstraction with mandatory boundary checksStefano Brivio2022-03-291-23/+37
| | | | | | | | | | | | | | | | | | | | Implement a packet abstraction providing boundary and size checks based on packet descriptors: packets stored in a buffer can be queued into a pool (without storage of its own), and data can be retrieved referring to an index in the pool, specifying offset and length. Checks ensure data is not read outside the boundaries of buffer and descriptors, and that packets added to a pool are within the buffer range with valid offset and indices. This implies a wider rework: usage of the "queueing" part of the abstraction mostly affects tap_handler_{passt,pasta}() functions and their callees, while the "fetching" part affects all the guest or tap facing implementations: TCP, UDP, ICMP, ARP, NDP, DHCP and DHCPv6 handlers. Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-03 17:42:30 +0000