aboutgitcodebugslistschat
path: root/test
Commit message (Collapse)AuthorAgeFilesLines
* demo/pasta: Fix bad sleep directiveStefano Brivio2022-05-191-1/+1
| | | | | | | | 'sleep' always needs an argument, this was meant to introduce a 2 seconds delay. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/run: Return 0 from run(), exit value already reflects failuresStefano Brivio2022-05-191-1/+1
| | | | | | | | | | | There's no need to return non-zero if there have been failures in run(), because the exit value is already determined from the number of failures reported in the log file. Return zero, so that this doesn't cause the script to fail, given we now run it with -e. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/perf/pasta_udp: Drop redundant assignment of ::1 to loopback interfaceStefano Brivio2022-05-191-1/+0
| | | | | | | | | | | There are a few occurrences of this assignment, which are needed to re-add ::1 as loopback address after the MTU has been increased back from a value below 1280 bytes. This one, however, is redundant, and causes an error in the execution. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Simplify explicit checks for command successDavid Gibson2022-05-195-52/+24
| | | | | | | | | A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Simplify *tools commands using pane_statusDavid Gibson2022-05-191-15/+10
| | | | | | | | | Now that we have pane_status to check the success of commands issued to panes, we can more easily check for the success of the 'which' commands used to check tool availability, rather than constructing, then parsing special "skip" output. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Add pane_status command to check for success of issued commandsDavid Gibson2022-05-193-50/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | When we use pane_wait to wait for a command issued to a tmux pane to finish we have no idea whether the command succeeded or not. This means that the test scripts can keep running long after the point something vital has failed, making it difficult to work out what went wrong. Add a new pane_status command that checks for success of the issued command and use it in most places instead of pane_wait. We still need explicit pane_wait where we're gathering explicit output with pane_parse, because the way we check the status with 'echo $?' means we lose track of that output. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: - instead of quitting the script, make a test fail if a command issued in a pane fails during a test, and loop until the status code is numeric in pane_status() as a hack to make it a bit more robust - retain usage of pane_wait() in iperf3 and teardown functions as we interrupt iperf3, passt, and pasta, so a non-zero exit code is expected - drop bogus ns_{1,2}_wait() calls in teardown_two_guests(), those functions were never implemented - use pane_status() for "guest" test directives too ] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Don't ignore errors during scriptDavid Gibson2022-05-192-6/+6
| | | | | | | | | | | | | | | | Most commands issued during the testing scripts aren't explicitly checked for errors. Therefore, if they fail, the shell will just keep on executing. This makes it difficult to figure out where things started going wrong if things fall over. Run the whole script with the set -e mode so that it will exit in the case of any (unchecked) failing command. To make this work we do need to add explicit checks / fallbacks for some commands which we expect to fail. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: use sh -e instead of setting -e later, so that we don't miss anything before set -e is issued] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Improve control character filtering in pane_parseDavid Gibson2022-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | pane_parse() attempts to grab the output from the last command issued into a tmux pane. It strips out control characters using tr, which in particular includes the final \r\n. However, this won't fully strip out terminal escape sequences. In particular this breaks if the shell in the pane is bash, with enable-bracketed-paste enabled in readline. That issues terminal sequences to enable and disable bracketed paste mode around every shell prompt. We can work around this because these escapes are followed by a \r (CR). More generally, it seems reasonable to assume that any terminal shenanigans followed by a CR, but not an LF is supposed to be hidden. So, use sed to strip everything before the second last CR. We still need the tr to remove the final \r\n from the string (sed processes a line at a time, and doesn't consider the CRLF part of the buffer it's processing). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: modify regexp to keep foo\r\r\n unchanged, by matching on at least one CR and a non-CR afterwards: that's the usual output pattern for bash on Debian 8 and Debian 9] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Don't globally set tmux default-shellDavid Gibson2022-05-191-6/+7
| | | | | | | | | | | | | | | | | run_term() uses tmux set-option -g to globally set the default shell. Unfortunately this hits a chicken-and-egg problem that's common with many of tmux's session options. If there isn't already a tmux server running, we can't connect to set the option. If we attempt this after starting our session (and therefore the server), then the session will already be started with the previous default shell. In any case it's not a good idea to set tmux global options, since that might interfere with whatever else the user is doing in tmux. So, instead set the default-shell option locally to the session after starting it. To make sure we get the right shell for our initial script, explicitly invoke /bin/sh to interpret it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Don't use tmux update-environmentDavid Gibson2022-05-191-4/+5
| | | | | | | | | | | | | | | | | The semantics of tmux's update-environment option are a bit confusing. It says it means the given variables are copied into the session environment from the source environment, but it's not entirely clear what the "source" environment means. From my experimentation it appeast to be the environment from which the tmux *server* is launched, not the one issuing the 'new-session' command. That makes it pretty much useles, certainly in our case where we have no way of knowing if the user has pre-existing tmux sessions. Instead use the new-session -e option to explicitly pass in the variables we want to propagate. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Add some debugging output for the test scripts themselvesDavid Gibson2022-05-191-0/+2
| | | | | | | | | | | | The DEBUG option for tests/run enables debugging options to passt/pasta, however that doesn't help with debugging the test scripts themselves, which are fairly fragile. Extend the DEBUG option so it also prints information on each command in the test scripts to make it easier to work out where things are falling over. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Remove unused XVFB variableDavid Gibson2022-05-191-3/+0
| | | | | | | The XVFB variable is initialized at the beginning of test/run then never used again. I'm assuming it's a leftover from some ealier iteration. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Update mbuto git URLsStefano Brivio2022-05-192-2/+2
| | | | | | The project is now at mbuto.sh, and git transport is enabled. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Add basic .gitignore filesDavid Gibson2022-05-191-0/+2
| | | | | | | Ignore various files generated during build or test. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* demo: podman: New port forwarding behaviour for pasta, minor fixesStefano Brivio2022-05-021-78/+56
| | | | | | | | | | | | Reflect the recent changes in the Podman adaptation (no port forwarding by default). It turns out that by running two iperf3 processes, sometimes slirp4netns blocks the second connection until the first test is done, thus doubling the throughput. Use a single process for slirp4netns with slirp4netns port handling. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib: Add small delay before trying to parse outputStefano Brivio2022-04-071-0/+1
| | | | | | | Don't fetch the log too early, we might get output from previous commands. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/distro: Set unprivileged_userns_clone on Debian Buster and earlierStefano Brivio2022-04-071-0/+4
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib: Consistent cols, rows, poster attributes for asciinema playerStefano Brivio2022-04-072-2/+2
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/perf: Work-around for virtio_net hang before long streams from guestStefano Brivio2022-03-292-0/+30
| | | | | | | I didn't have time to investigate the root cause for the virtio_net TX hang yet. Add a quick work-around for the moment being. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test, seccomp, Makefile: Switch to valgrind runs for passt functional testsStefano Brivio2022-03-296-13/+91
| | | | | | | | | | | | | | Pass to seccomp.sh a list of additional syscalls valgrind needs as EXTRA_SYSCALLS in a new 'valgrind' make target, and add corresponding support in seccomp.sh itself. In test setup functions, start passt with valgrind, but not for performance tests. Add tests checking that valgrind exits without errors after all the other tests in the group are done. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Add asciinema(1) as requirement for CI in READMEStefano Brivio2022-03-281-1/+1
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib/video: Fill in href attributes of video shortcutsStefano Brivio2022-03-281-1/+1
| | | | | | ...so that they can be indexed. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, util, tap: Implement --trace option for extra verbose loggingStefano Brivio2022-03-252-1/+15
| | | | | | | | --debug can be a bit too noisy, especially as single packets or socket messages are logged: implement a new option, --trace, implying --debug, that enables all debug messages. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib/setup: Unshare PID namespace in pasta_setup()Stefano Brivio2022-03-021-4/+8
| | | | | | ...otherwise, we'll leave processes (dhclient) around. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* demo/pasta: Clean up before rebuilding with -gStefano Brivio2022-03-011-0/+1
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt, pasta: Run-time selection of AVX2 buildStefano Brivio2022-02-283-12/+2
| | | | | | | | | | | | | Build-time selection of AVX2 flags and routines is not practical for distributions, but limiting AVX2 usage to checksum routines with specific run-time detection doesn't allow for easy performance gains from auto-vectorisation of batched packet handling routines. For x86_64, build non-AVX2 and AVX2 binaries, and implement a simple wrapper replacing the current executable with the AVX2 build if it's available, and if AVX2 is supported by the current CPU. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/distro/opensuse: Add Tumbleweed armv7l testStefano Brivio2022-02-281-0/+29
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib/term: Don't run demo when started as ./runStefano Brivio2022-02-281-1/+1
| | | | | | | I changed this in a previous commit by mistake, restore the original command. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* demo/pasta: Exit namespace in 'ns' pane before restarting pastaStefano Brivio2022-02-281-0/+1
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Fix name of CI asciinema player in perf links handlerStefano Brivio2022-02-231-5/+4
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* demo, ci: Switch to asciinema(1) for terminal recordingsStefano Brivio2022-02-225-92/+101
| | | | | | | | | | For demos, cool-retro-term(1) looked fancier, but several threads of that and ffmpeg(1) are just messing up with performance testing. The CI videos started getting really big as well, and they were difficult to read. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Add demo for Podman with pastaStefano Brivio2022-02-226-3/+951
| | | | | | | | ...showing setup steps, some peculiarities as --net option, and a general side-to-side comparison with slirp4netns(1), including "quick" TCP and UDP throughput and latency benchmarks. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/perf/passt_udp: Drop threshold for 256B testStefano Brivio2022-02-211-2/+2
| | | | | | | | | That test fails sometimes, it looks like iperf3 is still sending initial messages that are too big. I'll need to figure out why, but given that 256 bytes is not really an expected MTU, drop the thresholds to zero for the moment being. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/distro/ubuntu: Use DEBIAN_FRONTEND=noninteractive for apt on 22.04Stefano Brivio2022-02-211-0/+1
| | | | | | | | | Removing the needrestart package doesn't seem to work anymore, and I'm getting again prompts to restart services after installing gcc and make: export DEBIAN_FRONTEND=noninteractive before installing packages to avoid that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt, pasta: Namespace-based sandboxing, defer seccomp policy applicationStefano Brivio2022-02-213-15/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/perf/passt_tcp: Drop iperf3 window size for host-to-guest testsStefano Brivio2022-02-011-10/+10
| | | | | | | | | | With a recent 5.15 kernel, passing a huge window size to iperf3 with lower MTUs makes iperf3 stop sending packets after a few seconds -- I haven't investigated this in detail, but the window size will be adjusted dynamically anyway and not passing it doesn't actually affect throughput, so simply drop the option. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/distro/ubuntu: Skip apt-get update for 16.04 on powerpcStefano Brivio2022-01-301-1/+3
| | | | | | | | Some recent change to xenial-updates broke dependencies for gcc, it can't be installed anymore. Skipping apt-get update leaves gcc dependencies in a consistent state, though. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/distro: Avoid race between display of ns_msg and netcat exitingStefano Brivio2022-01-304-0/+4
| | | | | | | | | The shell might report 'nc -6 -l -p 9999 > /tmp/ns_msg' as done even after the subsequent 'echo' is done: wait one second before reading out /tmp/ns_msg, to ensure we read that instead of the "Done" message. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Add basic documentation about test suite, and cool-retro-term profileStefano Brivio2022-01-281-0/+104
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Add distribution tests for several architectures and kernel versionsStefano Brivio2022-01-285-0/+1297
| | | | | | | | | | | | | | | The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib/test: Introduce 'def' directive for frequently used patternsStefano Brivio2022-01-281-229/+267
| | | | | | | | | For distribution tests, we'll repeat some tests frequently. Add a 'def' directive that starts a block, ended by 'endef', whose execution can then be triggered by simply giving its name as a directive itself. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib/term: Allow for a wider variety of prompt characters in pane_wait()Stefano Brivio2022-01-281-7/+10
| | | | | | | | We might have highlighting and slightly different prompts across different distributions, allow a more reasonable set of prompt strings to be accepted as prompts. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib/video: Drop -preset ultrafast from ffmpeg argumentsStefano Brivio2022-01-261-1/+1
| | | | | | | It's not really needed on a reasonably powered CPU, and makes the video contents way less readable. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib/setup: Don't rely on IFS to properly separate qemu argumentsStefano Brivio2022-01-261-32/+32
| | | | | | ...this gets needlessly annoying while playing with test cases. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* perf/passt_udp: Lower failure throughput thresholds with big MTUsStefano Brivio2022-01-261-4/+4
| | | | | | | The throughput results in this test look quite variable, slightly lower figures look reasonable anyway. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/two_guests: Drop stray spaces after sleep directivesStefano Brivio2022-01-261-4/+4
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* demo/pasta: Don't wait for pasta to return to a promptStefano Brivio2022-01-261-1/+1
| | | | | | | Debug information might be printed after a prompt is seen, just wait those 3 seconds and be done with it. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* README, perf_report: Markdown and CSS fixesStefano Brivio2021-10-221-7/+8
| | | | | | Updating md2html on the server needs a few adjustments. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/two_guests: Fix sleep command for DADStefano Brivio2021-10-211-1/+2
| | | | | | | | | An inline comment prefixed by a space doesn't mean the space is dropped, and sleep(1) will get a blank in its argument. Move the comment on its own line. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/two_guests: Let the guests end DAD before starting the DHCPv6 clientStefano Brivio2021-10-211-0/+1
| | | | | | | They'll start DAD as we bring up the interface, and the DHCPv6 client might be unreasonably delayed if we start it too early. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 18:22:22 +0000