aboutgitcodebugslistschat
Commit message (Collapse)AuthorAgeFilesLines
* test: Make sure to update mbuto repositoryDavid Gibson2024-04-051-1/+7
| | | | | | | | | We download and use mbuto to build trivial boot images for our VM tests. However, if mbuto is already cloned, we won't update it to the current version. Add some make logic to ensure that we do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* cppcheck: Explicitly give files to checkDavid Gibson2024-04-052-3/+3
| | | | | | | | | | | | | | | | | | | | | | | Currently "make cppcheck" invokes cppcheck on ".", so it will check all the .c and .h files it can find in the source tree. This isn't ideal, because it can find files that aren't actually part of the real build, or even stale files which aren't in git. More practically, some upcoming changes are looking at downloading other source trees for some tests. Static errors in there is Not Our Problem, so checking them is both slow and pointless. So, change the Makefile to invoke cppcheck only on the specific source files that are part of the build. For some reason in this format the badBitmaskCheck warnings in seccomp.h which were suppressed by 5beb3472e ("cppcheck: Avoid errors due to zeroes in bitwise ORs") no longer trigger. That means we get unmatchedSuppression warnings instead. We add an unmatchedSuppression suppression instead of simply removing the original suppressions, just in case this odd behaviour isn't the same for all cppcheck versions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* netlink: Ignore routes to link-local addresses for selecting interfaceDavid Gibson2024-04-052-1/+23
| | | | | | | | | | | | | | | | | | | | Since f919dc7a4b1c ("conf, netlink: Don't require a default route to start"), and since 639fdf06ede ("netlink: Fix selection of template interface") less buggily, we haven't required a default route on the host in order to operate. Instead, if we lack a default route we'll pick an interface with any route, as long as there's only one such interface. If there's more than one, we don't have a good criterion to pick, so we give up with an informational message. Paul Holzinger pointed out that this code considers it ambiguous even if all but one of the interfaces has only routes to link-local addresses (fe80::/10). A route to link-local addresses isn't really useful from pasta's point of view, so ignore them instead. This removes a misleading message in many cases, and a spurious failure in some cases. Suggested-by: Paul Holzinger <pholzing@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Add helper to return name of address familyDavid Gibson2024-04-052-3/+21
| | | | | | | | | | | | We have a few places where we want to include the name of the internet protocol version (IPv4 or IPv6) in a message, which we handle with an open-coded ?: expression. This seems like something that might be more widely useful, so make a trivial helper to return the correct string based on the address family. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* netlink: Adjust interface index inside copied nexthop objects tooStefano Brivio2024-04-051-4/+11
| | | | | | | | | | | | | | | | | | | | As pasta duplicates host routes into the target namespaces, interface indices might not match, so we go through RTA_OIF attributes and fix them up to match the identifier in the namespace. But RTA_OIF is not the ony attribute specifying interfaces for routes: multipath routes use RTA_MULTIPATH attributes with nexthop objects, which contain in turn interface indices. Fix them up as well. If we don't, and we have at least two host interfaces, and the host interface we use as template isn't the first one (hence the mismatching indices), we'll fail to insert multipath routes with nexthop objects, and ultimately refuse to start as the kernel unexpectedly gives us ENODEV. Link: https://github.com/containers/podman/issues/22192 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* apparmor: Fix access to procfs namespace entries in pasta's abstractionDanish Prakash2024-04-051-0/+3
| | | | | | | | | | | | | | | | | | | | | From an original patch by Danish Prakash. With commit ff22a78d7b52 ("pasta: Don't try to watch namespaces in procfs with inotify, use timer instead"), if a filesystem-bound target namespace is passed on the command line, we'll grab a handle on its parent directory. That commit, however, didn't introduce a matching AppArmor rule. Add it here. To access a network namespace procfs entry, we also need a 'ptrace' rule. See commit 594dce66d3bb ("isolation: keep CAP_SYS_PTRACE when required") for details as to when we need this -- essentially, it's about operation with Buildah. Reported-by: Jörg Sonnenberger <joerg@bec.de> Link: https://github.com/containers/buildah/issues/5440 Link: https://bugzilla.suse.com/show_bug.cgi?id=1221840 Fixes: ff22a78d7b52 ("pasta: Don't try to watch namespaces in procfs with inotify, use timer instead") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* apparmor: Expand scope of @{run}/user access, allow writing PID files tooStefano Brivio2024-04-051-1/+1
| | | | | | | | | | | | | | | With Podman's custom networks, pasta will typically need to open the target network namespace at /run/user/<UID>/containers/networks: grant access to anything under /run/user/<UID> instead of limiting it to some subpath. Note that in this case, Podman will need pasta to write out a PID file, so we need write access, for similar locations, too. Reported-by: Jörg Sonnenberger <joerg@bec.de> Link: https://github.com/containers/buildah/issues/5440 Link: https://bugzilla.suse.com/show_bug.cgi?id=1221840 Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* apparmor: Add mount rule with explicit, empty source in passt abstractionStefano Brivio2024-04-051-0/+1
| | | | | | | | | | | | | For the policy to work as expected across either AppArmor commit 9d3f8c6cc05d ("parser: fix parsing of source as mount point for propagation type flags") and commit 300889c3a4b7 ("parser: fix option flag processing for single conditional rules"), we need one mount rule with matching mount options as "source" (that is, without source), and one without mount options and an explicit, empty source. Link: https://github.com/containers/buildah/issues/5440 Link: https://bugzilla.suse.com/show_bug.cgi?id=1221840 Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* README.md: Alpine, Guix and OpenSUSE now have packages for passtStefano Brivio2024-04-051-1/+3
| | | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* tcp: Unconditionally force ACK for all !SYN, !RST packets2024_03_26.4988e2bDavid Gibson2024-03-261-5/+1
| | | | | | | | | | | | | | | | | | | | | | | Currently we set ACK on flags packets only when the acknowledged byte pointer has advanced, or we hadn't previously set a window. This means in particular that we can send a window update with no ACK flag, which doesn't appear to be correct. RFC 9293 requires a receiver to ignore such a packet [0], and indeed it appears that every non-SYN, non-RST packet should have the ACK flag. The reason for the existing logic, rather than always forcing an ACK seems to be to avoid having the packet mistaken as a duplicate ACK which might trigger a fast retransmit. However, earlier tests in the function mean we won't reach here if we don't have either an advance in the ack pointer - which will already set the ACK flag, or a window update - which shouldn't trigger a fast retransmit. [0] https://www.ietf.org/rfc/rfc9293.html#section-3.10.7.4-2.5.2.1 Link: https://github.com/containers/podman/issues/22146 Link: https://bugs.passt.top/show_bug.cgi?id=84 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Never automatically add the ACK flag to RST packetsDavid Gibson2024-03-261-1/+1
| | | | | | | | | | | | | | | | | tcp_send_flag() will sometimes force on the ACK flag for all !SYN packets. This doesn't make sense for RST packets, where plain RST and RST+ACK have somewhat different meanings. AIUI, RST+ACK indicates an abrupt end to a connection, but acknowledges data already sent. Plain RST indicates an abort, when one end receives a packet that doesn't seem to make sense in the context of what it knows about the connection. All of the cases where we send RSTs are the second, so we don't want an ACK flag, but we currently could add one anyway. Change that, so we won't add an ACK to an RST unless the caller explicitly requests it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Rearrange logic for setting ACK flag in tcp_send_flag()David Gibson2024-03-261-5/+4
| | | | | | | | | | We have different paths for controlling the ACK flag for the SYN and !SYN paths. This amounts to sometimes forcing on the ACK flag in the !SYN path regardless of options. We can rearrange things to explicitly be that which will make things neater for some future changes. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Split handling of DUP_ACK from ACKDavid Gibson2024-03-261-2/+2
| | | | | | | | | | | | | | | The DUP_ACK flag to tcp_send_flag() has two effects: first it forces the setting of the ACK flag in the packet, even if we otherwise wouldn't. Secondly, it causes a duplicate of the flags packet to be sent immediately after the first. Setting the ACK flag to tcp_send_flag() also has the first effect, so instead of having DUP_ACK also do that, pass both flags when we need both operations. This slightly simplifies the logic of tcp_send_flag() in a way that makes some future changes easier. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: fix confusion between offset in the iovec array and in the entry2024_03_20.71dd405Laurent Vivier2024-03-201-4/+5
| | | | | | | | | | | | | | | | | | | | In write_remainder() 'skip' is the offset to start the operation from in the iovec array. In iov_skip_bytes(), 'skip' is also the offset in the iovec array but 'offset' is the first unskipped byte in the iovec entry. As write_remainder() uses 'skip' for both, 'skip' is reset to the first unskipped byte in the iovec entry rather to staying the first unskipped byte in the iovec array. Fix the problem by introducing a new variable not to overwrite 'skip' on each loop. Fixes: 8bdb0883b441 ("util: Add write_remainder() helper") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* netlink: Fix selection of template interfaceDavid Gibson2024-03-202-26/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | Since f919dc7a4b1c ("conf, netlink: Don't require a default route to start"), if there is only one host interface with routes, we will pick that as the template interface, even if there are no default routes for an IP version. Unfortunately this selection had a serious flaw: in some cases it would 'return' in the middle of an nl_foreach() loop, meaning we wouldn't consume all the netlink responses for our query. This could cause later netlink operations to fail as we read leftover responses from the aborted query. Rewrite the interface detection to avoid this problem. While we're there: * Perform detection of both default and non-default routes in a single pass, avoiding an ugly goto * Give more detail on error and working but unusual paths about the situation (no suitable interface, multiple possible candidates, etc.). Fixes: f919dc7a4b1c ("conf, netlink: Don't require a default route to start") Link: https://bugs.passt.top/show_bug.cgi?id=83 Link: https://github.com/containers/podman/issues/22052 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2270257 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Use info(), not warn() for somewhat expected cases where one IP version has no default routes, or no routes at all] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* netlink: Fix handling of NLMSG_DONE in nl_route_dup()2024_03_19.d35bcbeDavid Gibson2024-03-191-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A recent kernel change 87d381973e49 ("genetlink: fit NLMSG_DONE into same read() as families") changed netlink behaviour so that the NLMSG_DONE terminating a bunch of responses can go in the same datagram as those responses, rather than in a separate one. Our netlink code is supposed to handle that behaviour, and indeed does so for most cases, using the nl_foreach() macro. However, there was a subtle error in nl_route_dup() which doesn't work with this change. f00b1534 ("netlink: Don't try to get further datagrams in nl_route_dup() on NLMSG_DONE") attempted to fix this, but has its own subtle error. The problem arises because nl_route_dup(), unlike other cases doesn't just make a single pass through all the responses to a netlink request. It needs to get all the routes, then make multiple passes through them. We don't really have anywhere to buffer multiple datagrams, so we only support the case where all the routes fit in a single datagram - but we need to fail gracefully when that's not the case. After receiving the first datagram of responses (with nl_next()) we have a first loop scanning them. It needs to exit when either we run out of messages in the datagram (!NLMSG_OK()) or when we get a message indicating the last response (nl_status() <= 0). What we do after the loop depends on which exit case we had. If we saw the last response, we're done, but otherwise we need to receive more datagrams to discard the rest of the responses. We attempt to check for that second case by re-checking NLMSG_OK(nh, status). However in the got-last-response case, we've altered status from the number of remaining bytes to the error code (usually 0). That means NLMSG_OK() now returns false even if it didn't during the loop check. To fix this we need separate variables for the number of bytes left and the final status code. We also checked status after the loop, but this was redundant: we can only exit the loop with NLMSG_OK() == true if status <= 0. Reported-by: Martin Pitt <mpitt@redhat.com> Fixes: f00b153414b1 ("netlink: Don't try to get further datagrams in nl_route_dup() on NLMSG_DONE") Fixes: 4d6e9d0816e2 ("netlink: Always process all responses to a netlink request") Link: https://github.com/containers/podman/issues/22052 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* fedora: Switch license identifier to SPDX2024_03_18.615d370Dan Čermák2024-03-181-1/+1
| | | | | | | | The spec file patch by Dan Čermák was originally contributed at: https://src.fedoraproject.org/rpms/passt/pull-request/1 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* udp: Translate source address of resolver only for DNS remapped queriesStefano Brivio2024-03-181-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Paul reports that if pasta is configured with --dns-forward, and the container queries a resolver which is configured on the host directly, without using the address given for --dns-forward, we'll translate the source address of the response pretending it's coming from the address passed as --dns-forward, and the client will discard the reply. That is, $ cat /etc/resolv.conf 198.51.100.1 $ pasta --config-net --dns-forward 192.0.2.1 nslookup passt.top will not work, because we change the source address of the reply from 198.51.100.1 to 192.0.2.1. But the client contacted 198.51.100.1, and it's from that address that it expects an answer. Add a PORT_DNS_FWD flag for tap-facing ports, which is triggered by activity in the opposite direction as the other flags. If the tap-facing port was seen sending a DNS query that was remapped, we'll remap the source address of the response, otherwise we'll leave it unaffected. Reported-by: Paul Holzinger <pholzing@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf, netlink: Don't require a default route to startStefano Brivio2024-03-183-21/+59
| | | | | | | | | | | | | | | | | | | | There might be isolated testing environments where default routes and global connectivity are not needed, a single interface has all non-loopback addresses and routes, and still passt and pasta are expected to work. In this case, it's pretty obvious what our upstream interface should be, so go ahead and select the only interface with at least one route, disabling DHCP and implying --no-map-gw as the documentation already states. If there are multiple interfaces with routes, though, refuse to start, because at that point it's really not clear what we should do. Reported-by: Martin Pitt <mpitt@redhat.com> Link: https://github.com/containers/podman/issues/21896 Signed-off-by: Stefano brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* netlink: Don't try to get further datagrams in nl_route_dup() on NLMSG_DONEStefano Brivio2024-03-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Martin reports that, with Fedora Linux kernel version kernel-core-6.9.0-0.rc0.20240313gitb0546776ad3f.4.fc41.x86_64, including commit 87d381973e49 ("genetlink: fit NLMSG_DONE into same read() as families"), pasta doesn't exit once the network namespace is gone. Actually, pasta is completely non-functional, at least with default options, because nl_route_dup(), which duplicates routes from the parent namespace into the target namespace at start-up, is stuck on a second receive operation for RTM_GETROUTE. However, with that commit, the kernel is now able to fit the whole response, including the NLMSG_DONE message, into a single datagram, so no further messages will be received. It turns out that commit 4d6e9d0816e2 ("netlink: Always process all responses to a netlink request") accidentally relied on the fact that we would always get at least two datagrams as a response to RTM_GETROUTE. That is, the test to check if we expect another datagram, is based on the 'status' variable, which is 0 if we just parsed NLMSG_DONE, but we'll also expect another datagram if NLMSG_OK on the last message is false. But NLMSG_OK with a zero length is always false. The problem is that we don't distinguish if status is zero because we got a NLMSG_DONE message, or because we processed all the available datagram bytes. Introduce an explicit check on NLMSG_DONE. We should probably refactor this slightly, for example by introducing a special return code from nl_status(), but this is probably the least invasive fix for the issue at hand. Reported-by: Martin Pitt <mpitt@redhat.com> Link: https://github.com/containers/podman/issues/22052 Fixes: 4d6e9d0816e2 ("netlink: Always process all responses to a netlink request") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Paul Holzinger <pholzing@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* tap: Rename tap_iov_{base,len}David Gibson2024-03-143-17/+17
| | | | | | | | | | | These two functions are typically used to calculate values to go into the iov_base and iov_len fields of a struct iovec. They don't have to be used for that, though. Rename them in terms of what they actually do: calculate the base address and total length of the complete frame, including both L2 and tap specific headers. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: Implement tap_send() "slow path" in terms of fast pathDavid Gibson2024-03-143-25/+19
| | | | | | | | | | | | | | | | Most times we send frames to the guest it goes via tap_send_frames(). However "slow path" protocols - ARP, ICMP, ICMPv6, DHCP and DHCPv6 - go via tap_send(). As well as being a semantic duplication, tap_send() contains at least one serious problem: it doesn't properly handle short sends, which can be fatal on the qemu socket connection, since frame boundaries will get out of sync. Rewrite tap_send() to call tap_send_frames(). While we're there, rename it tap_send_single() for clarity. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: Simplify some casts in the tap "slow path" functionsDavid Gibson2024-03-141-23/+18
| | | | | | | | We can both remove some variables which differ from others only in type, and slightly improve type safety. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: Extend tap_send_frames() to allow multi-buffer framesDavid Gibson2024-03-144-37/+59
| | | | | | | | | | | tap_send_frames() takes a vector of buffers and requires exactly one frame per buffer. We have future plans where we want to have multiple buffers per frame in some circumstances, so extend tap_send_frames() to take the number of buffers per frame as a parameter. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Improve comment to rembufs calculation] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt, log: Call __openlog() earlier, log to stderr until we detachStefano Brivio2024-03-142-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Paul reports that, with commit 15001b39ef1d ("conf: set the log level much earlier"), early messages aren't reported to standard error anymore. The reason is that, once the log mask is changed from LOG_EARLY, we don't force logging to stderr, and this mechanism was abused to have early errors on stderr. Now that we drop LOG_EARLY earlier on, this doesn't work anymore. Call __openlog() as soon as we know the mode we're running as, using LOG_PERROR. Then, once we detach, if we're not running from an interactive terminal and logging to standard error is not forced, drop LOG_PERROR from the options. While at it, check if the standard error descriptor refers to a terminal, instead of checking standard output: if the user redirects standard output to /dev/null, they might still want to see messages from standard error. Further, make sure we don't print messages to standard error reporting that we couldn't log to the system logger, if we didn't open a connection yet. That's expected. Reported-by: Paul Holzinger <pholzing@redhat.com> Fixes: 15001b39ef1d ("conf: set the log level much earlier") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* pcap: Use clock_gettime() instead of gettimeofday()Stefano Brivio2024-03-142-13/+14
| | | | | | | | | | | | | | | POSIX.1-2008 declared gettimeofday() as obsolete, but I'm a dinosaur. Usually, C libraries translate that to the clock_gettime() system call anyway, but this doesn't happen in Jon's environment, and, there, seccomp happily kills pasta(1) when started with --pcap, because we didn't add gettimeofday() to our seccomp profiles. Use clock_gettime() instead. Reported-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* passt.1: --{no-,}dhcp-dns and --{no-,}dhcp-search don't take addressesStefano Brivio2024-03-141-4/+4
| | | | | | | | ...they are simple enable/disable options. Fixes: 89678c515755 ("conf, udp: Introduce basic DNS forwarding") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf: Warn if we can't advertise any nameserver via DHCP, NDP, or DHCPv6Stefano Brivio2024-03-141-2/+15
| | | | | | | | | | | We might have read from resolv.conf, or from the command line, a resolver that's reachable via loopback address, but that doesn't mean we can offer that via DHCP, NDP or DHCPv6: warn if there are no resolvers we can offer for a given IP version. Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf: Handle addresses passed via --dns just like the ones from resolv.confStefano Brivio2024-03-141-6/+6
| | | | | | | | | | | | | | | | | ...that is, call add_dns4() and add_dns6() instead of simply adding those to the list of servers we advertise. Most importantly, this will set the 'dns_host' field for the matching IP version, so that, as mentioned in the man page, servers passed via --dns are used for DNS mapping as well, if used in combination with --dns-forward. Reported-by: Paul Holzinger <pholzing@redhat.com> Link: https://bugs.passt.top/show_bug.cgi?id=82 Fixes: 89678c515755 ("conf, udp: Introduce basic DNS forwarding") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Paul Holzinger <pholzing@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* tap: Capture only packets that are actually sentLaurent Vivier2024-03-131-1/+1
| | | | | | | | | | | In tap_send_frames(), if we failed to send all the frames, we must only log the frames that have been sent, not all the frames we wanted to send. Fixes: dda7945ca9c9 ("pcap: Handle short writes in pcap_frame()") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Use existing helper for UDP checksum on inbound IPv6 packetsDavid Gibson2024-03-131-4/+1
| | | | | | | | | | | Currently we open code the calculation of the UDP checksum in udp_update_hdr6(). We calling a helper to handle the IPv6 pseudo-header, and preset the checksum field to 0 so an uninitialised value doesn't get folded in. We already have a helper to do this: csum_udp6() which we use in some slow paths. Use it here as well. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Avoid unnecessary pointer in udp_update_hdr4()David Gibson2024-03-131-9/+9
| | | | | | | | | We carry around the source address as a pointer to a constant struct in_addr. But it's silly to carry around a 4 or 8 byte pointer to a 4 byte IPv4 address. Just copy the IPv4 address around by value. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Re-order udp_update_hdr[46] for clarity and brevityDavid Gibson2024-03-131-26/+14
| | | | | | | | | | | | | | | The order of things in these functions is a bit odd for historical reasons. We initialise some IP header fields early, the more later after making some tests. Likewise we declare some variables without initialisation, but then unconditionally set them to values we could calculate at the start of the function. Previous cleanups have removed the reasons for some of these choices, so reorder for clarity, and where possible move the first assignment into an initialiser. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Pass data length explicitly to to udp_update_hdr[46]David Gibson2024-03-131-12/+16
| | | | | | | | | | | | These functions take an index to the L2 buffer whose header information to update. They use that for two things: to locate the buffer pointer itself, and to retrieve the length of the received message from the paralllel udp[46]_l2_mh_sock array. The latter is arguably a failure to separate concerns. Change these functions to explicitly take a buffer pointer and payload length as parameters. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Consistent port variable names in udp_update_hdr[46]David Gibson2024-03-131-18/+18
| | | | | | | | | In these functions we have 'dstport' for the destination port, but 'src_port' for the source port. Change the latter to 'srcport' for consistency. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Refactor udp_sock[46]_iov_init()David Gibson2024-03-131-52/+50
| | | | | | | | | | | | Each of these functions have 3 essentially identical loops in a row. Merge the loops into a single common udp_sock_iov_init() function, calling udp_sock[46]_iov_init_one() helpers to initialize each "slot" in the various parallel arrays. This is slightly neater now, and more naturally allows changes we want to make where more initialization will become common between IPv4 and IPv6. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf: Don't warn if nameservers were found, but won't be advertisedStefano Brivio2024-03-121-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | Starting from commit 3a2afde87dd1 ("conf, udp: Drop mostly duplicated dns_send arrays, rename related fields"), we won't add to c->ip4.dns and c->ip6.dns nameservers that can't be used by the guest or container, and we won't advertise them. However, the fact that we don't advertise any nameserver doesn't mean that we didn't find any, and we should warn only if we couldn't find any. This is particularly relevant in case both --dns-forward and --no-map-gw are passed, and a single loopback address is listed in /etc/resolv.conf: we'll forward queries directed to the address specified by --dns-forward to the loopback address we found, we won't advertise that address, so we shouldn't warn: this is a perfectly legitimate usage. Reported-by: Paul Holzinger <pholzing@redhat.com> Link: https://github.com/containers/podman/issues/19213 Fixes: 3a2afde87dd1 ("conf, udp: Drop mostly duplicated dns_send arrays, rename related fields") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Paul Holzinger <pholzing@redhat.com>
* icmp: Use 'flowside' epoll references for ping socketsDavid Gibson2024-03-125-44/+24
| | | | | | | | | | | | | | | | Currently ping sockets use a custom epoll reference type which includes the ICMP id. However, now that we have entries in the flow table for ping flows, finding that is sufficient to get everything else we want, including the id. Therefore remove the icmp_epoll_ref type and use the general 'flowside' field for ping sockets. Having done this we no longer need separate EPOLL_TYPE_ICMP and EPOLL_TYPE_ICMPV6 reference types, because we can easily determine which case we have from the flow type. Merge both types into EPOLL_TYPE_PING. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Flow based error reportingDavid Gibson2024-03-121-14/+12
| | | | | | | | | | | | Use flow_dbg() and flow_err() helpers to generate flow-linked error messages in most places. Make a few small improvements to the messages while we're at it. This allows us to avoid the awkward 'pname' variables since whether we're dealing with ICMP or ICMPv6 is already built into the flow type which these helpers include. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Coding style fix in icmp_tap_handler()] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Store ping socket information in flow tableDavid Gibson2024-03-128-88/+116
| | | | | | | | | | | | | | | | | | Currently icmp_id_map[][] stores information about ping sockets in a bespoke structure. Move the same information into new types of flow in the flow table. To match that change, replace the existing ICMP timer with a flow-based timer for expiring ping sockets. This has the advantage that we only need to scan the active flows, not all possible ids. We convert icmp_id_map[][] to point to the flow table entries, rather than containing its own information. We do still use that array for locating the right ping flows, rather than using a "flow native" form of lookup for the time being. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Update id_sock description in comment to icmp_ping_new()] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* ip: Use regular htons() for non-constant protocol number in L2_BUF_IP4_PSUMStefano Brivio2024-03-081-1/+1
| | | | | | | | instead of htons_constant(), which is for... constants. Fixes: 5bf200ae8a1a ("tcp, udp: Don't include destination address in partially precomputed csums") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* iov: Improve documentation of iov_skip_bytes()David Gibson2024-03-072-15/+15
| | | | | | | | | As pointed out in review, the documentation comments for iov_skip_bytes() are more confusing than they should be. Reword them, including updating parameter names, to make it clearer. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Introduce tcp_fill_headers4()/tcp_fill_headers6()Laurent Vivier2024-03-061-50/+106
| | | | | | | | | | | | | | Replace the macro SET_TCP_HEADER_COMMON_V4_V6() by a new function tcp_fill_header(). Move IPv4 and IPv6 code from tcp_l2_buf_fill_headers() to tcp_fill_headers4() and tcp_fill_headers6() Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-ID: <20240303135114.1023026-10-lvivier@redhat.com> [dwg: Correct commit message with new function names] Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: make tap_update_mac() genericLaurent Vivier2024-03-064-12/+12
| | | | | | | | | | Use ethhdr rather than tap_hdr. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-ID: <20240303135114.1023026-9-lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* checksum: introduce functions to compute the header part checksum for TCP/UDPLaurent Vivier2024-03-064-50/+90
| | | | | | | | | | | | | | | The TCP and UDP checksums are computed using the data in the TCP/UDP payload but also some informations in the IP header (protocol, length, source and destination addresses). We add two functions, proto_ipv4_header_psum() and proto_ipv6_header_psum(), to compute the checksum of the IP header part. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-ID: <20240303135114.1023026-8-lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* checksum: use csum_ip4_header() in udp.c and tcp.cLaurent Vivier2024-03-065-46/+27
| | | | | | | | | | | | | | | | | We can find the same function to compute the IPv4 header checksum in tcp.c, udp.c and tap.c Use the function defined for tap.c, csum_ip4_header(), but with the code used in tcp.c and udp.c as it doesn't need a fully initialiazed IPv4 header, only protocol, tot_len, saddr and daddr. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-ID: <20240303135114.1023026-7-lvivier@redhat.com> [dwg: Fix weird cppcheck regression; it appears to be a problem in pre-existing code, but somehow this patch is exposing it] Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: little cleanup in udp_update_hdrX() to prepare future changesLaurent Vivier2024-03-061-20/+19
| | | | | | | | | | | | | | | | | | | | in udp_update_hdr4(): Assign the source address to src, either b->s_in.sin_addr, c->ip4.dns_match or c->ip4.gw and then set b->iph.saddr to src->s_addr. in udp_update_hdr6(): Assign the source address to src, either b->s_in6.sin6_addr, c->ip6.dns_match, c->ip6.gw or c->ip6.addr_ll. Assign the destination to dst, either c->ip6.addr_seen or &c->ip6.addr_ll_seen. Then set dst to b->ip6h.daddr and src to b->ip6h.saddr. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-ID: <20240303135114.1023026-6-lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: move IP stuff from util.[ch] to ip.[ch]Laurent Vivier2024-03-0617-136/+175
| | | | | | | | | | | | Introduce ip.[ch] file to encapsulate IP protocol handling functions and structures. Modify various files to include the new header ip.h when it's needed. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-ID: <20240303135114.1023026-5-lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* checksum: add csum_iov()Laurent Vivier2024-03-062-14/+49
| | | | | | | | | | | | | | | | Introduce the function csum_unfolded() that computes the unfolded 32-bit checksum of a data buffer, and call it from csum() that returns the folded value. Introduce csum_iov() that computes the checksum using csum_folded() on all vectors of the iovec array and returns the folded result. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-ID: <20240303135114.1023026-4-lvivier@redhat.com> [dwg: Fixed trivial cppcheck & clang-tidy regressions] Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* checksum: align buffersLaurent Vivier2024-03-061-23/+24
| | | | | | | | | | | | | If buffer is not aligned use sum_16b() only on the not aligned part, and then use csum_avx2() on the remaining part Remove unneeded now function csum_unaligned(). Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-ID: <20240303135114.1023026-3-lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 06:48:45 +0000