From 00f3bcea0531f50be49793f9c51bf370756aa55b Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 18 Mar 2021 12:56:03 +0100 Subject: passt: Add the README Signed-off-by: Stefano Brivio --- README.md | 177 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 README.md (limited to 'README.md') diff --git a/README.md b/README.md new file mode 100644 index 0000000..48f4f6d --- /dev/null +++ b/README.md @@ -0,0 +1,177 @@ +# passt: Plug A Simple Socket Transport + +_passt_ implements a translation layer between a Layer-2 network interface (tap) +and native Layer-4 sockets (TCP, UDP, ICMP/ICMPv6 echo) on a host. It doesn't +require any capabilities or privileges, and it can be used as a simple +replacement for Slirp. + +- [General idea](#general-idea) +- [Non-functional Targets](#non-functional-targets) +- [Interfaces and Environment](#interfaces-and-environment) +- [Services](#services) +- [Addresses](#addresses) +- [Protocols](#protocols) +- [Ports](#ports) +- [Try it](#try-it) +- [Contribute](#contribute) + +## General idea + +When container workloads are moved to virtual machines, the network traffic is +typically forwarded by interfaces operating at data link level. Some components +in the containers ecosystem (such as _service meshes_), however, expect +applications to run locally, with visible sockets and processes, for the +purposes of socket redirection, monitoring, port mapping. + +To solve this issue, user mode networking as provided e.g. by _Slirp_, +_libslirp_, _slirp4netns_ can be used. However, these existing solutions +implement a full TCP/IP stack, replaying traffic on sockets that are local to +the pod of the service mesh. This creates the illusion of application processes +running on the same host, eventually separated by user namespaces. + +While being almost transparent to the service mesh infrastructure, that kind of +solution comes with a number of downsides: + +* three different TCP/IP stacks (guest, adaptation and host) need to be + traversed for every service request. There are no chances to implement + zero-copy mechanisms, and the amount of context switches increases + dramatically +* addressing needs to be coordinated to create the pretense of consistent + addresses and routes between guest and host environments. This typically needs + a NAT with masquerading, or some form of packet bridging +* the traffic seen by the service mesh and observable externally is a distant + replica of the packets forwarded to and from the guest environment: + * TCP congestion windows and network buffering mechanisms in general operate + differently from what would be naturally expected by the application + * protocols carrying addressing information might pose additional challenges, + as the applications don't see the same set of addresses and routes as they + would if deployed with regular containers + +_passt_ implements a thinner layer between guest and host, that only implements +what's strictly needed to pretend processes are running locally. A further, full +TCP/IP stack is not necessarily needed. Some sort of TCP adaptation is needed, +however, as this layer runs without the `CAP\_NET\_RAW` capability: we can't +create raw IP sockets on the pod, and therefore need to map packets at Layer-2 +to Layer-4 sockets offered by the host kernel. + +The problem and this approach are illustrated in more detail, with diagrams, +[here](https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md). + +## Non-functional Targets + +Security and maintainability goals: + +* no dynamic memory allocation +* ~2 000 LoC target +* no external dependencies + +## Interfaces and Environment + +_passt_ exchanges packets with _qemu_ via UNIX domain socket, using the `socket` +back-end in qemu. Currently, qemu can only connect to a listening process via +TCP. Two temporary solutions are available: + +* a [patch](https://passt.top/passt/tree/qemu) for qemu +* a wrapper, [qrap](https://passt.top/passt/tree/qrap.c), that connects to a + UNIX domain socket and starts qemu, which can now use the file descriptor + that's already opened + +This approach, compared to using a _tap_ device, doesn't require any security +capabilities, as we don't need to create any interface. + +## Services + +_passt_ provides some minimalistic implementations of networking services that +can't practically run on the host: + +* [ARP proxy](https://passt.top/passt/tree/arp.c), that resolve the address of + the host (which is used as gateway) to the original MAC address of the host +* [DHCP server](https://passt.top/passt/tree/dhcp.c), a simple implementation + handing out one single IPv4 address to the guest, namely, the same address as + the first one configured for the upstream host interface, and passing the + nameservers configured on the host +* [NDP proxy](https://passt.top/passt/tree/ndp.c), which can also assign prefix + and nameserver using SLAAC +* _to be done_: DHCPv6 server: right now, the guest gets the same _prefix_ as + the host, but not the same address, because the suffix is generated from the + MAC address of the virtual machine, so we currently have to translate packet + addresses back and forth. With a DHCPv6 server, we could simply assign the + host address to the guest + +## Addresses + +For IPv4, the guest is assigned, via DHCP, the same address as the upstream +interface of the host, and the same default gateway as the default gateway of +the host. Addresses are never translated. + +For IPv6, the guest is assigned, via SLAAC, the same prefix as the upstream +interface of the host, and the same default route as the default route of the +host. This means that the guest will typically have a different address, and +the destination address is translated for packets going to the guest. This will +be avoided in the future once a minimalistic DHCPv6 server is implemented in +_passt_. + +## Protocols + +_passt_ supports TCP, UDP and ICMP/ICMPv6 echo (requests and replies). More +details about the TCP implementation are available +[here](https://passt.top/passt/tree/tcp.c), and for the UDP +implementation [here](https://passt.top/passt/tree/udp.c). + +An IGMP proxy is currently work in progress. + +## Ports + +To avoid the need for explicit port mapping configuration, _passt_ binds to all +unbound non-ephemeral (0-49152) TCP ports and all unbound (0-65536) UDP ports. +Binding to low ports (0-1023) will fail without additional capabilities, and +ports already bound (service proxies, etc.) will also not be used. + +Service proxies and other services running in the container need to be started +before _passt_ starts. + +## Try it + +* build from source: + + git clone https://passt.top/passt + cd passt + make + +* a static build for x86_64 as of the latest commit is also available for + convenience [here](https://passt.top/builds/static/). These binaries are + simply built with: + + CFLAGS="-static" make + +* run the demo script, that creates a network namespace called `passt`, sets up + sets up a _veth_ pair and and addresses, together with NAT for IPv4 and NDP + proxying for IPv6, then starts _passt_ in the network namespace: + + doc/demo.sh + +* from the same network namespace, start qemu. At the moment, qemu doesn't + support UNIX domain sockets for the `socket` back-end. Two alternatives: + + * use the _qrap_ wrapper, which maps a tap socket descriptor to _passt_'s + UNIX domain socket, for example: + + ip netns exec passt ./qrap 5 qemu-system-x86_64 ... -net socket,fd=5 -net nic,model=virtio ... + + * or patch qemu with [this patch](https://passt.top/passt/tree/qemu/0001-net-Allow-also-UNIX-domain-sockets-to-be-used-as-net.patch) + and start it like this: + + qemu-system-x86_64 ... -net socket,connect=/tmp/passt.socket -net nic,model=virtio + +* and that's it, you should now have TCP connections, UDP, and ICMP/ICMPv6 + echo working from/to the guest for IPv4 and IPv6 + +* to connect to a service on the VM, just connect to the same port directly + with the address of the network namespace. For example, to ssh to the guest, + from the main namespace on the host: + + ssh 192.0.2.2 + +## Contribute + +Send patches and issue reports to [sbrivio@redhat.com](mailto:sbrivio@redhat.com). -- cgit v1.2.3