From da20f57f19dc75f86b6313b3397218056782792e Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 19 Aug 2021 20:22:40 +0200 Subject: passt, qrap: Add man pages Signed-off-by: Stefano Brivio --- passt.1 | 707 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ qrap.1 | 77 +++++++ 2 files changed, 784 insertions(+) create mode 100644 passt.1 create mode 100644 qrap.1 diff --git a/passt.1 b/passt.1 new file mode 100644 index 0000000..e547eca --- /dev/null +++ b/passt.1 @@ -0,0 +1,707 @@ +.TH passt 1 + +.SH NAME +.B passt +\- Unprivileged user-mode network connectivity for virtual machines +.br +.B pasta +\- Unprivileged user-mode network connectivity for network namespaces + +.SH SYNOPSIS +.B passt +[\fIOPTION\fR]... +.br +.B pasta +[\fIOPTION\fR]... [\fITARGET_PID\fR] + +.SH DESCRIPTION + +.SS passt + +.B passt +(\fIP\fRlug \fIA\fR \fIS\fRimple \fIS\fRocket \fIT\fRransport) provides full, +quasi-native network connectivity to virtual machines in user-mode without +requiring any capabilities or privileges. + +The data plane implements a translation layer between a Layer-2 virtual network +interface and native Layer-4 (TCP, UDP, ping) sockets on the host, giving the +illusion that application processes residing on the guest are running on the +local host, from a networking perspective. + +Built-in ARP, DHCP, NDP, and DHCPv6 implementations are designed to provide the +guest with a network configuration that tightly resembles the host native +configuration. With the default options, guest and host share IP addresses, +routes, and port bindings. + +Port forwarding and translation allow networking services running in the guest +to be reachable from both local and remote hosts. + +Unlike \fBslirp4netns\fR(1), \fBpasst\fR doesn't implement a full TCP stack: the +TCP translation layer has no stateful data buffering and operates by reflecting +one peer's observed parameters (congestion window size, acknowledged data, etc.) +to the corresponding peer. + +Currently, the only supported hypervisor is \fBqemu\fR(1), connecting to +\fBpasst\fR by means of a UNIX domain socket. This configuration can be obtained +via out-of-tree qemu patches, available at: + + \fIhttps://passt.top/passt/tree/qemu\fR + +or with the \fBqrap\fR(1) wrapper. + +.SS pasta + +.B pasta +(\fIP\fRack \fIA\fR \fIS\fRubtle \fIT\fRap \fIA\fRbstraction) provides +equivalent functionality to network namespaces, as the one offered by +\fBpasst\fR for virtual machines. + +If TARGET_PID is given, \fBpasta\fR associates to the user and network namespace +of the corresponding process. Otherwise, \fBpasta\fR creates a new user and +network namespace, and spawns an interactive shell within this context. A +\fItap\fR device within the network namespace is created to provide network +connectivity. + +For local TCP and UDP traffic only, \fBpasta\fR also implements a bypass path +directly mapping Layer-4 sockets between \fIinit\fR and target namespaces, +for performance reasons. + +.SH OPTIONS + +.TP +.BR \-d ", " \-\-debug +Be verbose, don't run in background. + +.TP +.BR \-q ", " \-\-quiet +Don't print informational messages. + +.TP +.BR \-f ", " \-\-foreground +Don't run in background. +Default is to fork into background, if started from an interactive terminal. + +.TP +.BR \-e ", " \-\-stderr +Log to standard error too. +Default is to log to system logger only, if started from an interactive +terminal, and to both system logger and standard error otherwise. + +.TP +.BR \-h ", " \-\-help +Display a help message and exit. + +.TP +.BR \-p ", " \-\-pcap " " \fIfile +Capture tap-facing (that is, guest-side or namespace-side) network packets to +\fIfile\fR in \fBpcap\fR format. + +If \fIfile\fR is not given, capture packets to + + \fB/tmp/passt_\fIISO8601-timestamp\fR_\fIinstance-number\fB.pcap\fR + +in \fBpasst\fR mode and to + + \fB/tmp/pasta_\fIISO8601-timestamp\fR_\fIinstance-number\fB.pcap\fR + +in \fBpasta\fR mode, where \fIinstance-number\fR is a progressive count of +other detected instances running on the same host. + +.TP +.BR \-m ", " \-\-mtu " " \fImtu +Assign \fImtu\fR via DHCP (option 26) and NDP (option type 5). +By default, no MTU options will be sent. + +.TP +.BR \-a ", " \-\-address " " \fIaddr +Assign IPv4 \fIaddr\fR via DHCP (\fByiaddr\fR), or \fIaddr\fR via DHCPv6 (option +5) and an \fIaddr\fR-based prefix via NDP Router Advertisement (option type 3) +for an IPv6 \fIaddr\fR. +This option can be specified zero (for defaults) to two times (once for IPv4, +once for IPv6). +By default, assigned IPv4 and IPv6 addresses are taken from the host interface +with the first default route. + +.TP +.BR \-n ", " \-\-netmask " " \fImask +Assign IPv4 netmask \fImask\fR, expressed as dot-decimal or number of bits, via +DHCP (option 1). +By default, the netmask associated to the host address matching the assigned one +is used. If there's no matching address on the host, the netmask is determined +according to the CIDR block of the assigned address (RFC 4632). + +.TP +.BR \-M ", " \-\-mac-addr " " \fIaddr +Use source MAC address \fIaddr\fR when communicating to the guest or to the +target namespace. +Default is to use the MAC address of the interface with the first default route +on the host. + +.TP +.BR \-g ", " \-\-gateway " " \fIaddr +Assign IPv4 \fIaddr\fR as default gateway via DHCP (option 3), or IPv6 +\fIaddr\fR as source for NDP Router Advertisement and DHCPv6 messages. +This option can be specified zero (for defaults) to two times (once for IPv4, +once for IPv6). +By default, IPv4 and IPv6 addresses are taken from the host interface with the +first default route. + +Note: these addresses are also used as source address for packets directed to +the guest or to the target namespace having a loopback or local source address, +to allow mapping of local traffic to guest and target namespace. See the +\fBNOTES\fR below for more details about this mechanism. + +.TP +.BR \-i ", " \-\-interface " " \fIname +Use host interface \fIname\fR to derive addresses and routes. +Default is to use the interface with the first default route. + +.TP +.BR \-D ", " \-\-dns " " \fIaddr +Assign IPv4 \fIaddr\fR via DHCP (option 23) or IPv6 \fIaddr\fR via NDP Router +Advertisement (option type 25) and DHCPv6 (option 23) as DNS resolver. +This option can be specified multiple times, and a single, empty option disables +DNS options altogether. +In \fBpasst\fR mode, default is to use addresses from \fI/etc/resolv.conf\fR, +and, in \fBpasta\fR mode, no addresses are sent by default. +.TP +.BR \-S ", " \-\-search " " \fIlist +Assign space-separated \fIlist\fR via DHCP (option 119), via NDP Router +Advertisement (option type 31) and DHCPv6 (option 24) as DNS domain search list. +A single, empty option disables sending the DNS domain search list. +In \fBpasst\fR mode, default is to use the search list from +\fI/etc/resolv.conf\fR, and, in \fBpasta\fR mode, no list is sent by default. + +.TP +.BR \-\-no-tcp +Disable the TCP protocol handler. No TCP connections will be accepted host-side, +and TCP packets coming from guest or target namespace will be silently dropped. + +.TP +.BR \-\-no-udp +Disable the UDP protocol handler. No UDP traffic coming from the host side will +be forwarded, and UDP packets coming from guest or target namespace will be +silently dropped. + +.TP +.BR \-\-no-icmp +Disable the ICMP/ICMPv6 echo handler. ICMP and ICMPv6 echo requests coming from +guest or target namespace will be silently dropped. + +.TP +.BR \-\-no-dhcp +Disable the DHCP server. DHCP client requests coming from guest or target +namespace will be silently dropped. + +.TP +.BR \-\-no-ndp +Disable NDP responses. NDP messages coming from guest or target namespace will +be ignored. + +.TP +.BR \-\-no-dhcpv6 +Disable the DHCPv6 server. DHCPv6 client requests coming from guest or target +namespace will be silently dropped. + +.TP +.BR \-\-no-ra +Disable Router Advertisements. Router Solicitations coming from guest or target +namespace will be ignored. + +.TP +.BR \-4 ", " \-\-ipv4-only +Enable IPv4-only operation. IPv6 traffic will be ignored. +By default, IPv6 operation is enabled as long as at least an IPv6 default route +and an interface address are configured on a given host interface. + +.TP +.BR \-4 ", " \-\-ipv6-only +Enable IPv6-only operation. IPv4 traffic will be ignored. +By default, IPv4 operation is enabled as long as at least an IPv4 default route +and an interface address are configured on a given host interface. + +.SS \fBpasst\fR-only options + +.TP +.BR \-s ", " \-\-socket " " \fIpath +Path for UNIX domain socket used by \fBqemu\fR(1) or \fBqrap\fR(1) to connect to +\fBpasst\fR. +Default is to probe a free socket, not accepting connections, starting from +\fI/tmp/passt_1.socket\fR to \fI/tmp/passt_64.socket\fR. + +.TP +.BR \-t ", " \-\-tcp-ports " " \fIspec +Configure TCP port forwarding to guest. \fIspec\fR can be one of: +.RS + +.TP +.BR none +Don't forward any ports + +.TP +.BR all +Forward all unbound, non-ephemeral ports, as permitted by current capabilities. +For low (< 1024) ports, see \fBNOTES\fR. + +.TP +.BR ports +A comma-separated list of ports, optionally ranged with \fI-\fR, and, +optionally, with target ports after \fI:\fR, if they differ. Examples: +.RS +.TP +-t 22 +Forward local port 22 to 22 on the guest +.TP +-t 22:23 +Forward local port 22 to port 23 on the guest +.TP +-t 22,25 +Forward local ports 22 and 25 to ports 22 and 25 on the guest +.TP +-t 22-80 +Forward local ports 22 to 80 to corresponding ports on the guest +.TP +-t 22-80-32:90 +Forward local ports 22 to 80 to corresponding ports on the guest plus 10 +.RE + +Default is \fBnone\fR. +.RE + +.TP +.BR \-u ", " \-\-udp-ports " " \fIspec +Configure UDP port forwarding to guest. \fIspec\fR is as described for TCP +above. + +Note: unless overridden, UDP ports with numbers corresponding to forwarded TCP +port numbers are forwarded too, without, however, any port translation. IPv6 +bound ports are also forwarded for IPv4. + +Default is \fBnone\fR. + +.SS \fBpasta\fR-only options + +.TP +.BR \-I ", " \-\-ns-ifname " " \fIname +Name of tap interface to be created in target namespace. +By default, the same interface name as the external, routable interface is used. + +.TP +.BR \-t ", " \-\-tcp-ports " " \fIspec +Configure TCP port forwarding to namespace. \fIspec\fR can be one of: +.RS + +.TP +.BR none +Don't forward any ports + +.TP +.BR auto +Forward all ports currently bound in the namespace. The list of ports is derived +from listening sockets reported by \fI/proc/net/tcp\fR and \fI/proc/net/tcp6\fR, +see \fBproc\fR(5). + +.TP +.BR ports +A comma-separated list of ports, optionally ranged with \fI-\fR, and, +optionally, with target ports after \fI:\fR, if they differ. Examples: +.RS +.TP +-t 22 +Forward local port 22 to 22 in the target namespace +.TP +-t 22:23 +Forward local port 22 to port 23 in the target namespace +.TP +-t 22,25 +Forward local ports 22 and 25 to ports 22 and 25 in the target namespace +.TP +-t 22-80 +Forward local ports 22 to 80 to corresponding ports in the target namespace +.TP +-t 22-80-32:90 +Forward local ports 22 to 80 to corresponding ports plus 10 in the target +namespace +.RE + +IPv6 bound ports are also forwarded for IPv4. + +Default is \fBauto\fR. +.RE + +.TP +.BR \-u ", " \-\-udp-ports " " \fIspec +Configure UDP port forwarding to guest. \fIspec\fR is as described for TCP +above, and the list of ports is derived from listening sockets reported by +\fI/proc/net/udp\fR and \fI/proc/net/udp6\fR, see \fBproc\fR(5). + +Note: unless overridden, UDP ports with numbers corresponding to forwarded TCP +port numbers are forwarded too, without, however, any port translation. + +IPv6 bound ports are also forwarded for IPv4. + +Default is \fBauto\fR. + +.TP +.BR \-T ", " \-\-tcp-ns " " \fIspec +Configure TCP port forwarding from target namespace to init namespace. +\fIspec\fR is as described above. + +Default is \fBauto\fR. + +.TP +.BR \-U ", " \-\-udp-ns " " \fIspec +Configure UDP port forwarding from target namespace to init namespace. +\fIspec\fR is as described above. + +Default is \fBauto\fR. + +.SH EXAMPLES + +.SS \fBpasta +.BR "Create and use a new, connected, user and network namespace" +.RS +.nf +$ iperf3 -s -D +$ ./pasta +Outbound interface: eth0, namespace interface: eth0 +ARP: + address: 28:16:ad:39:a9:ea +DHCP: + assign: 192.168.1.118 + mask: 255.255.255.0 + router: 192.168.1.1 +NDP/DHCPv6: + assign: 2a02:6d40:3ca5:2001:b81d:fa4a:8cdd:cf17 + router: fe80::62e3:27ff:fe33:2b01 +# +# udhcpc -i eth0 +udhcpc: started, v1.30.1 +udhcpc: sending discover +udhcpc: sending select for 192.168.1.118 +udhcpc: lease of 192.168.1.118 obtained, lease time 4294967295 +# dhclient -6 +# ip address show +1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 + link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 + inet 127.0.0.1/8 scope host lo + valid_lft forever preferred_lft forever + inet6 ::1/128 scope host + valid_lft forever preferred_lft forever +2: eth0: mtu 65520 qdisc pfifo_fast state UNKNOWN group default qlen 1000 + link/ether 5e:90:02:eb:b0:2a brd ff:ff:ff:ff:ff:ff + inet 192.168.1.118/24 brd 192.168.1.255 scope global eth0 + valid_lft forever preferred_lft forever + inet6 2a02:6d40:3ca5:2001:b81d:fa4a:8cdd:cf17/128 scope global + valid_lft forever preferred_lft forever + inet6 2a02:6d40:3ca5:2001:5c90:2ff:feeb:b02a/64 scope global dynamic mngtmpaddr + valid_lft 3591sec preferred_lft 3591sec + inet6 fe80::5c90:2ff:feeb:b02a/64 scope link + valid_lft forever preferred_lft forever +# ip route show +default via 192.168.1.1 dev eth0 +192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.118 +# ip -6 route show +2a02:6d40:3ca5:2001:b81d:fa4a:8cdd:cf17 dev eth0 proto kernel metric 256 pref medium +2a02:6d40:3ca5:2001::/64 dev eth0 proto kernel metric 256 expires 3584sec pref medium +fe80::/64 dev eth0 proto kernel metric 256 pref medium +default via fe80::62e3:27ff:fe33:2b01 dev eth0 proto ra metric 1024 expires 3584sec pref medium +# iperf3 -c 127.0.0.1 -t1 +Connecting to host 127.0.0.1, port 5201 +[ 5] local 127.0.0.1 port 51938 connected to 127.0.0.1 port 5201 +[ ID] Interval Transfer Bitrate Retr Cwnd +[ 5] 0.00-1.00 sec 4.46 GBytes 38.3 Gbits/sec 0 3.93 MBytes +- - - - - - - - - - - - - - - - - - - - - - - - - +[ ID] Interval Transfer Bitrate Retr +[ 5] 0.00-1.00 sec 4.46 GBytes 38.3 Gbits/sec 0 sender +[ 5] 0.00-1.41 sec 4.45 GBytes 27.1 Gbits/sec receiver + +iperf Done. +# iperf3 -c ::1 -t1 +Connecting to host ::1, port 5201 +[ 5] local ::1 port 50108 connected to ::1 port 5201 +[ ID] Interval Transfer Bitrate Retr Cwnd +[ 5] 0.00-1.00 sec 4.35 GBytes 37.4 Gbits/sec 0 4.99 MBytes +- - - - - - - - - - - - - - - - - - - - - - - - - +[ ID] Interval Transfer Bitrate Retr +[ 5] 0.00-1.00 sec 4.35 GBytes 37.4 Gbits/sec 0 sender +[ 5] 0.00-1.41 sec 4.35 GBytes 26.4 Gbits/sec receiver + +iperf Done. +# ping -c1 -4 spaghetti.pizza +PING spaghetti.pizza (172.67.192.217) 56(84) bytes of data. +64 bytes from 172.67.192.217: icmp_seq=1 ttl=255 time=37.3 ms + +--- spaghetti.pizza ping statistics --- +1 packets transmitted, 1 received, 0% packet loss, time 0ms +# ping -c1 -6 spaghetti.pizza +PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes +64 bytes from 2606:4700:3034::6815:147a: icmp_seq=1 ttl=255 time=35.6 ms + +--- spaghetti.pizza ping statistics --- +1 packets transmitted, 1 received, 0% packet loss, time 0ms +rtt min/avg/max/mdev = 35.605/35.605/35.605/0.000 ms +# logout +$ + +.RE +.fi + +.BR "Connect an existing user and network namespace" +.RS +.nf +$ unshare -rUn +# echo $$ +2446678 + +.fi +.BR " [From another terminal]" +.nf +$ ./pasta 2446678 +Outbound interface: eth0, namespace interface: eth0 +ARP: + address: 28:16:ad:39:a9:ea +DHCP: + assign: 192.168.1.118 + mask: 255.255.255.0 + router: 192.168.1.1 +NDP/DHCPv6: + assign: 2a02:6d40:3ca5:2001:b81d:fa4a:8cdd:cf17 + router: fe80::62e3:27ff:fe33:2b01 + +.fi +.BR " [Back to the original terminal]" +.nf +# udhcpc -i eth0 +udhcpc: started, v1.30.1 +udhcpc: sending discover +udhcpc: sending select for 192.168.1.118 +udhcpc: lease of 192.168.1.118 obtained, lease time 4294967295 +# dhclient -6 +# ip address show +1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 + link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 + inet 127.0.0.1/8 scope host lo + valid_lft forever preferred_lft forever + inet6 ::1/128 scope host + valid_lft forever preferred_lft forever +2: eth0: mtu 65520 qdisc pfifo_fast state UNKNOWN group default qlen 1000 + link/ether fa:c1:2a:27:92:a9 brd ff:ff:ff:ff:ff:ff + inet 192.168.1.118/24 brd 192.168.1.255 scope global eth0 + valid_lft forever preferred_lft forever + inet6 2a02:6d40:3ca5:2001:b81d:fa4a:8cdd:cf17/128 scope global + valid_lft forever preferred_lft forever + inet6 2a02:6d40:3ca5:2001:f8c1:2aff:fe27:92a9/64 scope global dynamic mngtmpaddr + valid_lft 3594sec preferred_lft 3594sec + inet6 fe80::f8c1:2aff:fe27:92a9/64 scope link + valid_lft forever preferred_lft forever +.fi +.RE + +.SS \fBpasst +.BR "Start and connect a guest with basic port forwarding" +.RS +.nf +$ ./passt -f -t 2222:22 +Outbound interface: eth0 +ARP: + address: 28:16:ad:39:a9:ea +DHCP: + assign: 192.168.1.118 + mask: 255.255.255.0 + router: 192.168.1.1 + search: + redhat.com +NDP/DHCPv6: + assign: 2a02:6d40:3ca5:2001:b81d:fa4a:8cdd:cf17 + router: fe80::62e3:27ff:fe33:2b01 + search: + redhat.com +UNIX domain socket bound at /tmp/passt_1.socket + +You can now start qrap: + ./qrap 5 kvm ... -net socket,fd=5 -net nic,model=virtio +or directly qemu, patched with: + qemu/0001-net-Allow-also-UNIX-domain-sockets-to-be-used-as-net.patch +as follows: + kvm ... -net socket,connect=/tmp/passt_1.socket -net nic,model=virtio + +.fi +.BR " [From another terminal]" +.nf +$ ./qrap 5 kvm test.qcow2 -m 1024 -display none -nodefaults -nographic -net socket,fd=5 -net nic,model=virtio +Connected to /tmp/passt_1.socket + +.fi +.BR " [Back to the original terminal]" +.nf +passt: DHCP: ack to request +passt: from 52:54:00:12:34:56 +passt: NDP: received NS, sending NA +passt: NDP: received RS, sending RA +passt: DHCPv6: received SOLICIT, sending ADVERTISE +passt: NDP: received NS, sending NA +passt: DHCPv6: received REQUEST/RENEW/CONFIRM, sending REPLY +passt: NDP: received NS, sending NA + +.fi +.BR " [From yet another terminal]" +.nf +$ ssh -p 2222 root@localhost +root@localhost's password: +.fi +.BR " [...]" +.nf +# ip address show +1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 + link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 + inet 127.0.0.1/8 scope host lo + valid_lft forever preferred_lft forever + inet6 ::1/128 scope host + valid_lft forever preferred_lft forever +2: ens2: mtu 65520 qdisc pfifo_fast state UP group default qlen 1000 + link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff + inet 192.168.1.118/24 brd 192.168.1.255 scope global noprefixroute ens2 + valid_lft forever preferred_lft forever + inet6 2a02:6d40:3ca5:2001:b81d:fa4a:8cdd:cf17/128 scope global noprefixroute + valid_lft forever preferred_lft forever + inet6 2a02:6d40:3ca5:2001:b019:9ae2:a2fe:e6b4/64 scope global dynamic noprefixroute + valid_lft 3588sec preferred_lft 3588sec + inet6 fe80::1f98:d09f:9309:9e77/64 scope link noprefixroute + valid_lft forever preferred_lft forever +.fi +.RE + +.SH NOTES + +.SS Handling of traffic with local destination and source addressses + +Both \fBpasst\fR and \fBpasta\fR can bind on ports with a local address, +depending on the configuration. Local destination or source addresses need to be +changed before packets are delivered to the guest or target namespace: most +operating systems would drop packets received from non-loopback interfaces with +local addresses, and it would also be impossible for guest or target namespace +to route answers back. + +For convenience, and somewhat arbitrarily, the source address on these packets +is translated to the address of the default IPv4 or IPv6 gateway -- this is +known to be an existing, valid address on the same subnet. + +Loopback destination addresses are instead translated to the observed external +address of the guest or target namespace. For IPv6 packets, if usage of a +link-local address by guest or namespace has ever been observed, and the +original destination address is also a link-local address, the observed +link-local address is used. Otherwise, the observed global address is used. For +both IPv4 and IPv6, if no addresses have been seen yet, the configured addresses +will be used instead. + +For example, if \fBpasst\fR or \fBpasta\fR receive a connection from 127.0.0.1, +with destination 127.0.0.10, and the default IPv4 gateway is 192.0.2.1, while +the last observed source address from guest or namespace is 192.0.2.2, this will +be translated to a connection from 192.0.2.1 to 192.0.2.2. + +Similarly, for traffic coming from guest or namespace, packets with destination +address corresponding to the default gateway will have their destination address +translated to a loopback address, if and only if a packet, in the opposite +direction, with a loopback destination or source address, port-wise matching for +UDP, or connection-wise for TCP, has been recently forwarded to guest or +namespace. + +.SS Handling of local traffic in pasta + +Depending on the configuration, \fBpasta\fR can bind to local ports in the init +namespace, in the target namespace, or both, and forward connections and packets +to corresponding ports in the other namespace. + +To avoid unnecessary overhead, these connections and packets are not forwarded +through the tap device connecting the namespaces: \fBpasta\fR creates a socket +in the destination namespace, with matching Layer-4 protocol, and uses it to +forward local data. For TCP, data is forwarded between the originating socket +and the new socket using the \fBsplice\fR(2) system call, and for UDP, a pair +of \fBrecvmmsg\fR(2) and \fBsendmmsg\fR(2) system calls deals with packet +transfers. + +This bypass only applies to local connections and traffic, because it's not +possible to bind sockets to foreign addresses. + +.SS Binding to low numbered ports (well-known or system ports, up to 1023) + +If the port forwarding configuration requires binding to port numbers lower than +1024, \fBpasst\fR and \fBpasta\fR will try to bind to them, but will fail if not +running as root, or without the \fICAP_NET_BIND_SERVICE\fR Linux capability, see +\fBservices\fR(5) and \fBcapabilities\fR(7). + +.SS ICMP/ICMPv6 Echo sockets + +ICMP and ICMPv6 Echo requests coming from guest or target namespace are handled +using so-called "ping" sockets, introduced in Linux 2.6.30. To preserve the +original identifier (see RFC 792, page 14, for ICMP, and RFC 4443, section 4.1, +for ICMPv6), \fBpasst\fR and \fBpasta\fR try to bind these sockets using the +observed source identifier as "port" -- that corresponds to Echo identifiers +for "ping" sockets. + +As \fBbind\fR(2) failures were seen with particularly restrictive SELinux +policies, a fall-back mechanism maps different identifiers to different sockets, +and identifiers in replies will be mapped back to the original identifier of the +request. However, if \fBbind\fR(2) fails and the fall-back mechanism is used, +echo requests will be forwarded with different, albeit unique, identifiers. + +For ICMP and ICMPv6 Echo requests to work, the \fIping_group_range\fR parameter +needs to include the PID of \fBpasst\fR or \fBpasta\fR, see \fBicmp\fR(7). + +.SS pasta and loopback interface + +As \fBpasta\fR connects to an existing namespace, or once it creates a new +namespace, it will also ensure that the loopback interface, \fIlo\fR, is brought +up. This is needed to bind ports using the loopback address in the namespace. + +.SS TCP sending window and \fITCP_INFO\fB before Linux 5.3 + +To synchronise the TCP sending window from host Layer-4 sockets to the TCP +parameters announced in TCP segments sent over the Layer-2 interface, +\fBpasst\fR and \fBpasta\fR routinely query the size of the sending window seen +by the kernel on the corresponding socket using the \fITCP_INFO\fR socket +option, see \fBtcp\fR(7). Before Linux 5.3, i.e. before Linux kernel commit +8f7baad7f035 ("tcp: Add snd_wnd to TCP_INFO"), the sending window +(\fIsnd_wnd\fR field) is not available. + +If the sending window cannot be queried, it will always be announced as a fixed +value to guest or target namespace (14 600 bytes, suggested by RFC 6928), and +segments received by guest or target namespace will be acknowledged as soon as +the corresponding payload is enqueued to the corresponding socket. The normal +behaviour is to acknowledge segments only as the remote peer acknowledges the +corresponding payload, in order to reflect the congestion control dynamic back +to the sender. This might affect throughput of TCP connections. + +.SH LIMITATIONS + +Currently, IGMP/MLD proxying (RFC 4605) and support for SCTP (RFC 4960) are not +implemented. + +TCP Selective Acknowledgment (RFC 2018), as well as Protection Against Wrapped +Sequences (PAWS) and Round-Trip Time Measurement (RTTM), both described by RFC +7232, are currently not implemented. + +.SH AUTHOR + +Stefano Brivio + +.SH REPORTING BUGS + +No public bug tracker is available at this time. For the moment being, report +issues to Stefano Brivio . + +.SH COPYRIGHT + +Copyright (c) 2020-2021 Red Hat GmbH. + +\fBpasst\fR and \fBpasta\fR are free software: you can redistribute them and/or +modify them under the terms of the GNU Affero General Public License as +published by the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +.SH SEE ALSO + +\fBnamespaces\fR(7), \fBqemu\fR(1), \fBqrap\fR(1), \fBslirp4netns\fR(1). + +High-level documentation is available at https://passt.top/passt/about/. diff --git a/qrap.1 b/qrap.1 new file mode 100644 index 0000000..10c569d --- /dev/null +++ b/qrap.1 @@ -0,0 +1,77 @@ +.TH qrap 1 + +.SH NAME +.B qrap +\- qemu wrapper connecting UNIX domain socket to file descriptor + +.SH SYNOPSIS +.B qrap +[\fIFDNUM\fR \fIQEMU_CMD\fR] [\fIQEMU_ARG\fR]... +.SH DESCRIPTION +\fBqrap\fR is a wrapper, designed specifically for usage with \fBqemu\fR(1) and +\fBpasst\fR(1), connecting a UNIX domain socket to a file descriptor, and +running \fBqemu\fR(1) with given arguments. + +A running instance of \fBpasst\fR(1) is probed checking for UNIX domain sockets, +answering a dummy ARP request, with names starting from +\fI/tmp/passt_1.socket\fR up to \fI/tmp/passt_64.socket\fR. + +If first and second arguments are not a socket number and a path, that is, +respectively, \fIFDNUM\fR and \fIQEMU_CMD\fR, \fBqrap\fR will try to locate a +qemu binary and patch the command line to specify a network device and a +\fInetdev\fR back-end for usage with \fBpasst\fR(1). + +If \fBqrap\fR patches the command line, it will remove any potentially +conflicting network device, that is, any \fI-netdev\fR or \fI-net\fR option, or +any \fI-device\fR option with argument starting with \fIvirtio-net-pci,\fR, +\fIvirtio-net-ccw,\fR, \fIe1000,\fR, \fIe1000e,\fR, or \fIrtl8139,\fR. + +.SH EXAMPLES + +.BR "Start qemu explicitly passing its command name and a socket number" +.RS +.nf +$ ./qrap 5 kvm test.qcow2 -m 1024 -display none -nodefaults -nographic -net socket,fd=5 -net nic,model=virtio +.fi +.RE + +.BR "Start qemu without command name and socket number, patching arguments" +.RS +.nf +$ ./qrap test.qcow2 -m 1024 -display none -nodefaults -nographic +.fi +.RE + +.SH NOTES + +This wrapper is temporary and needed only as long as \fBqemu\fR(1) does not +directly support a UNIX domain socket as \fInetdev\fR back-end. + +Out-of-tree patches for \fBqemu\fR(1) introducing support for a UNIX domain +socket back-end are available at: + + \fIhttps://passt.top/passt/tree/qemu\fR + +.SH AUTHOR + +Stefano Brivio + +.SH REPORTING BUGS + +No public bug tracker is available at this time. For the moment being, report +issues to Stefano Brivio . + +.SH COPYRIGHT + +Copyright (c) 2020-2021 Red Hat GmbH. + +\fBqrap\fR is free software: you can redistribute is and/or modify it under the +terms of the GNU Affero General Public License as published by the Free Software +Foundation, either version 3 of the License, or (at your option) any later +version. + +.SH SEE ALSO + +\fBqemu\fR(1), \fBpasst\fR(1). + +High-level documentation is available at https://passt.top/passt/about/. -- cgit v1.2.3