aboutgitcodebugslistschat
path: root/test/lib/setup
Commit message (Collapse)AuthorAgeFilesLines
* test/lib/setup: Transform i686 kernel architecture name into QEMU name (i386)Stefano Brivio2024-08-211-4/+6
| | | | | | | | It's qemu-system-i386, but uname -m reports i686. I didn't test i486 and i586. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf: Allow address remapped to host to be configuredDavid Gibson2024-08-211-3/+8
| | | | | | | | | | | | | | | | | | | | | Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Use "nstool exec" to slightly simplify testsDavid Gibson2023-04-081-20/+13
| | | | | | | | Using this, rather than using "nstool info" to get the pid then manually connecting with nsenter makes things a little simpler. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* nstool: Replace "pid" subcommand with "info" subcommandDavid Gibson2023-04-081-6/+6
| | | | | | | | | The new subcommand gives more information about the holder process and its namespace, and may be further extended in future. Add some options which give the old behaviour for existing scripts. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* nstool: Reverse parameters to nstoolDavid Gibson2023-04-081-14/+14
| | | | | | | | Having the "subcommand" first is more conventional and will make it more natural for future extensions I have planned. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* nstool: Rename nsholder to nstoolDavid Gibson2023-04-081-15/+15
| | | | | | | In preparation for extending what it does. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Relicense to GPL 2.0, or any later versionStefano Brivio2023-04-061-1/+1
| | | | | | | | | | | | | | | | | | | In practical terms, passt doesn't benefit from the additional protection offered by the AGPL over the GPL, because it's not suitable to be executed over a computer network. Further, restricting the distribution under the version 3 of the GPL wouldn't provide any practical advantage either, as long as the passt codebase is concerned, and might cause unnecessary compatibility dilemmas. Change licensing terms to the GNU General Public License Version 2, or any later version, with written permission from all current and past contributors, namely: myself, David Gibson, Laine Stump, Andrea Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Switch to qemu -netdev stream option instead of using qrapStefano Brivio2022-11-041-27/+23
| | | | | | | | | | | qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Wait for network before starting passt in two_guests setupStefano Brivio2022-11-041-0/+2
| | | | | | | | | | | | | As pasta now configures that target network namespace with --config-net, we need to wait for addresses and routes to be actually present. Just sending netlink messages doesn't mean this is done synchronously. A more elegant alternative, which probably makes sense regardless of this test setup, would be to query, from pasta, addresses and routes we added, and wait until they're there, before proceeding. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib: Move screen-scraping setup and layout functions to _ugly filesStefano Brivio2022-11-041-23/+0
| | | | | | | | | | | I'm going to add yet another one of those, for which I have no quick solution. It's a regression in some sense, but at least if we make this regression more observable and defined, it should be easier to find a comprehensive solution later, within this or another testing framework. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* test: Add log file tests for pasta plus corresponding layout and setupStefano Brivio2022-10-261-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To test log files on a tmpfs mount, we need to unshare the mount namespace, which means using a context for the passt pane is not really practical at the moment, as we can't open a shell there, so we would have to encapsulate all the commands under 'unshare -rUm', plus the "inner" pasta command, running in turn a tcp_rr server. It might be worth fixing this by e.g. detecting we are trying to spawn an interactive shell and adding a special path in the context setup with some form of stdin redirection -- I'm not sure it's doable though. For this reason, add a new layout, using a context only for the host pane, while keeping the old command dispatch mechanism for the passt pane. We also need a new setup function that doesn't start pasta: we want to start and restart it with different options. Further, we need a 'pint' directive, to send an interrupt to the passt pane: add that in lib/test. All the tests before the one involving tmpfs and a detached mount namespace were also tested with the context mechanism. To make an eventual conversion easier, pass tcp_crr directly as a command on pasta's command line where feasible. While at it, fix the comment to the teardown_pasta() function. The new test set can be semi-conveniently run as: ./run pasta_options/log_to_file and it checks basic log creation, size of the log file after flooding it with debug entries, rotations, and basic consistency after rotations, on both an existing filesystem and a tmpfs, chosen as it doesn't support collapsing data ranges via fallocate(), hence triggering the fall-back mechanism for logging rotation. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Use --config-net for namespace setupDavid Gibson2022-09-291-14/+3
| | | | | | | | | | | | | | The setup functions for passt_in_ns and two_guests perform some fairly slow dhclient calls to configure the network in the namespace before starting the guest. This isn't really part of the tests, just necessary for the operations later. We can simplify and speed this up a bit by using pasta's '--config-net' option to configure the networking for us. As a bonus this means we have at least a minimal test of the --config-net option itself. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: More robust wait for pasta/passt to be readyDavid Gibson2022-09-291-5/+10
| | | | | | | | | | | | | When we start passt or pasta, it may take a short time to be ready to handle packets, especially if running under valgrind. We have a number of semi-arbitrary fixed sleeps to account for this. We can do this more robustly by exploiting the fact that pasta/passt doesn't write its pidfile until it's ready to go, so if we wait for the pidfile to be created, we can proceed with confidence. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib: Wait for DHCPv4 before starting DHCPv6 client in two_guests testStefano Brivio2022-09-231-0/+1
| | | | | | | | | | I'm not sure why, but dhclient hangs otherwise. This reflects what we do in the passt_in_ns setup steps. Eventually, this whole block could go away if we let pasta configure this network namespace with --config-net. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Move pidfiles and nsholder sockets into state directoryDavid Gibson2022-09-131-33/+33
| | | | | | | Currently they go in the passt source tree with a fixed names, which means their presence can mess with subsequent test runs. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Store pcap files in $LOGDIR instead of /tmpDavid Gibson2022-09-131-8/+8
| | | | | | | The capture files are more or less a different form of log output from the tests, so place them in $LOGDIR. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Create common state directories for temporary filesDavid Gibson2022-09-131-0/+2
| | | | | | | | | | | | | | | | | | The test scripts create a bunch of temporary files to keep track of internal state. Some are made in /tmp with individual mktemp calls, some go in the passt source directory, and some go in $LOGDIR. This can sometimes make it messy to clean up after failed test runs. Start cleaning this up by creating a single "state" directory ($STATEBASE) in /tmp for all the state or temporary files used by a single test run. Clean it up automatically in cleanup() - except when DEBUG==1, because those files can be useful for debugging test script failures. We create subdirectories under $STATEBASE for each setup function, exposed as $STATESETUP. We also create subdirectories for each test script and expose those to the scripts as __STATEDIR__. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Use new-style command issue for passt_in_ns testsDavid Gibson2022-09-131-42/+31
| | | | | | | Put the pieces together to use the new style context based dispatch for the passt_in_pasta tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Use context system for two_guests testsDavid Gibson2022-09-131-62/+53
| | | | | | | | Now that we have all the pieces we need for issuing commands both into namespaces and into guests, we can use those to convert the two_guests to using only the new style context command issue. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Use context system for guest commandsDavid Gibson2022-09-131-4/+9
| | | | | | | | | | | | | | | Extends the context system in the test scripts to allow executing commands within a guest. Do this without requiring an existing network in the guest by using socat to run ssh via a vsock connection. We do need some additional "sleep"s in the tests, because the new faster dispatch means that sometimes we attempt to connect before socat has managed to listen. For now, only use this for the plain "passt" tests. The "passt_in_ns" and other tests have additional complications we still need to deal with. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Extend context system to run commands in namespace for pasta testsDavid Gibson2022-09-131-9/+8
| | | | | | | Extend the context system to allow commands to be run in a namespace created with unshare, and use it for the namespace used in the pasta tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Use new-style contexts for passt pane in the pasta and passt testsDavid Gibson2022-09-131-10/+9
| | | | | | | | | | Convert the pasta and passt tests to use new-style context execution for the things that run in the "passt" frame. Don't touch the passt_in_ns or two_guests tests yet, because they run passt inside a namespace which introduces some additional complications we have yet to handle. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Issue host commands via context for most testsDavid Gibson2022-09-131-15/+32
| | | | | | | | | Convert most of the tests to use the new-style system for issuing commands for all host commands. We leave the distro tests for now: they use the same pane for both host and guest commands which we'll need some more things to deal with. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Kill qemu by pidfile rather than ^CDavid Gibson2022-08-201-8/+12
| | | | | | | | | | | | | Currently in at least some of the testcases we kill qemu processes we're done with by issuing a Control-C to the tmux panel it's running in. That makes things harder as we try to move towards allowing "headless" testing without tmux. So, instead always use an explicit kill on a pid derived from a pidfile for killing qemu. Note that we don't need to remove the pidfiles afterwards, because qemu does that itself when terminated. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Use shutdown test for pastaDavid Gibson2022-08-201-3/+1
| | | | | | | | | For the passt and passt_in_ns tests we have a "shutdown" testcase that checks for any errors from the passt process we were using (including valgrind warnings). Do the same for pasta tests, so that we catch any error codes from the pasta process. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Rename slightly misleading "valgrind" testsDavid Gibson2022-08-201-2/+0
| | | | | | | | | | | | | | | | | | | The "valgrind" test cases are designed to pick up errors reported when passt is running under valgrind. But what it actually does is just kill the passt process, then see if it had a non-zero exit code. That means it will equally well pick up any other problems which caused passt to exit with an error status: either something detected within passt or as a result of passt being killed by an unexpected signal. The fact that the "valgrind" test is actually responsible for shutting down the passt process is non-obvious and can lead to problems when selectively running tests during debugging. Rename the "valgrind" tests to "shutdown" tests and run it regardless of whether we're using valgrind or not. This allows us to remove an ugly speacial case in the passt_in_ns teardown code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Split setup/teardown functions for build and distro testsDavid Gibson2022-08-201-0/+15
| | | | | | | | | | | | Currently the build tests and distro tests share a common setup function. That works for now, but changes we want to make will mean they need slightly different setup, so split the setup functions in preparation. Currently, neither build nor distro tests have any teardown function. Again, future changes are going to mean we need to do some teardown, so create some empty for now teardown functions in preparation. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Use dhclient --no-pid for namespaces in two_guests testsDavid Gibson2022-07-221-4/+4
| | | | | | | | | | Before starting the guests, these tests configure addresses in a pasta namespace using dhclient. However, because it's a user namespace, it's not running as "real" root and can't write to the dhclient pid file. This doesn't stop it working, but causes an ugly error message which we can avoid by using the --no-pid option. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Remove unnecessary ^D in passt_in_ns teardownDavid Gibson2022-07-221-2/+0
| | | | | | | | | | | | | | | | | teardown_passt_in_ns() sends a ^D to the NS pane, which appears to be intended to terminate the nsenter running there, leaving the namespace. However, we've also sent a ^D to the PASST pane which will exit the pasta instance which created the namespace. With the namespace destroyed the nsenter in the NS pane will be killed, so it does not need to be exited explicitly. In fact sending the extra ^D can be harmful, since it will exit the shell in which the nsenter was run, causing the whole pane to be closed. That can then mean that the "pane_wait NS" hangs indefinitely. I believe this will sometimes work, because there's a race between the various options here, but it should be more reliable without the extra ^D. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Fix detection of empty 'hout' responses in passt{,_in_ns} testsDavid Gibson2022-07-221-0/+14
| | | | | | | | | | | | | | The dhcp/passt and dhcp/passt_in_ns tests at least, and maybe others use 'hout' commands that need to be able to detect empty output. However, we don't set PS1, which means the screen-scraping logic which detects this may not be reliable. In addition, if the host is using a recent bash, it will have bracketed paste mode enabled which will also add escape codes which will mess up the empty output detection. Set the prompt and disable bracketed paste mode from the passt and passt_in_ns setups to avoid these problems. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Drop further ^D in passt demo teardownStefano Brivio2022-07-221-5/+1
| | | | | | | | | Similar case as the one fixed by David's patch "tests: Remove unnecessary ^D in passt_in_ns teardown": we happen to pseudo-randomly close panes by unnecessarily exiting the parent shells there, and subsequent pane_wait directives hang. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Explicitly list test files in test/run, remove "onlyfor" supportDavid Gibson2022-07-141-10/+0
| | | | | | | | | | | | | | | | | Currently test/run uses wildcards to run all of the tests in a directory. However, that wildcard list is filtered down by the "onlyfor" directives in the test files... usually to a single file. Therefore, just explicitly list the files we *really* want to run for this test mode. This makes it easier to see at the top level what tests will be executed, and to change that list temporarily while debugging specific failures. This means the "onlyfor" directive no longer has any purpose, and we can remove it. "onlyfor" was also the only used of the $MODE variable, so we can remove that too. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Move mbuto download and execution to asset buildDavid Gibson2022-07-141-17/+6
| | | | | | | | | | | | Move the download of mbuto and using it to create a sample initramfs to the asset build makefile, rather than embedding it in the test scripts themselves. The two_guests tests used to use two separate copies of the mbuto image. As an initramfs the mbuto image is strictly readonly though, so that's not necessary. So, also use the same image for both guests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Invoke specific qemu-system-* binariesDavid Gibson2022-07-141-4/+13
| | | | | | | | | | | | | | | | | | | | | | A lot of tests and examples invoke qemu with the command "kvm". However, as far as I can tell, "kvm" being aliased to the appropriate qemu system binary is Debian specific. The binary names from qemu upstream - qemu-system-$ARCH - also aren't universal, but they are more common (they should be good for both Debian and Fedora at least). In order to still get KVM acceleration when available, we use the option "-M accel=kvm:tcg" to tell qemu to try using either KVM or TCG in that order A number of the places we invoked "kvm" are expecting specifically an x86 guest, and so it's also safer to explicitly invoke qemu-system-x86_64. Some others appear to be independent of the target arch (just wanting the same arch as the host to allow KVM acceleration). Although I suspect there may be more subtle x86 specific options in the qemu command lines, attempt to preserve arch independence by using $(uname -m). Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Add external mbuto profile, drop udhcpc, and switch to itStefano Brivio2022-07-061-1/+1
| | | | | | | | | This depends on a future change in mbuto to accept external profile files. Add a file defining what we need for tests and demos, dropping udhcpc and script as they're not needed anymore, and switch to it. Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Use dhclient instead of udhcpcDavid Gibson2022-06-151-3/+3
| | | | | | | | | | | | For some reason, the passt/pasta tests and examples use dhclient for DHCPv6, but in most cases use udhcpc for DHCPv4. Change it to use dhclient for both DHCPv4 and DHCPv6. This means one less tool we need for testing, plus dhclient is easily available on Fedora whereas udhcpc is not. Note that the passt tests still rely on udhcpc indirectly because mbuto wants to put it into the guest images it generates. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Tweak dhclient arguments for readabilityDavid Gibson2022-06-151-1/+1
| | | | | | | | | | | | | | A number of tests and examples use dhclient in both IPv4 and IPv6 modes. We use "dhclient -6" for IPv6, but usually just "dhclient" for IPv4. Add an explicit "-4" argument to make it more clear and explicit. In addition, when dhclient is run from within pasta it usually won't be "real" root, and so will not have access to write the default global pid file. This results in a mostly harmless but irritating error: Can't create /var/run/dhclient.pid: Permission denied We can avoid that by using the --no-pid flag to dhclient. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Don't abbreviate ip(8) arguments in examples and testsDavid Gibson2022-06-151-2/+2
| | | | | | | | ip(8)'s ability to take abbreviated arguments (e.g. "li sh" instead of "link show") is very handy when using it interactively, but it doesn't make for very readable scripts and examples when shown that way. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Add pane_status command to check for success of issued commandsDavid Gibson2022-05-191-31/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | When we use pane_wait to wait for a command issued to a tmux pane to finish we have no idea whether the command succeeded or not. This means that the test scripts can keep running long after the point something vital has failed, making it difficult to work out what went wrong. Add a new pane_status command that checks for success of the issued command and use it in most places instead of pane_wait. We still need explicit pane_wait where we're gathering explicit output with pane_parse, because the way we check the status with 'echo $?' means we lose track of that output. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: - instead of quitting the script, make a test fail if a command issued in a pane fails during a test, and loop until the status code is numeric in pane_status() as a hack to make it a bit more robust - retain usage of pane_wait() in iperf3 and teardown functions as we interrupt iperf3, passt, and pasta, so a non-zero exit code is expected - drop bogus ns_{1,2}_wait() calls in teardown_two_guests(), those functions were never implemented - use pane_status() for "guest" test directives too ] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Update mbuto git URLsStefano Brivio2022-05-191-1/+1
| | | | | | The project is now at mbuto.sh, and git transport is enabled. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test, seccomp, Makefile: Switch to valgrind runs for passt functional testsStefano Brivio2022-03-291-12/+28
| | | | | | | | | | | | | | Pass to seccomp.sh a list of additional syscalls valgrind needs as EXTRA_SYSCALLS in a new 'valgrind' make target, and add corresponding support in seccomp.sh itself. In test setup functions, start passt with valgrind, but not for performance tests. Add tests checking that valgrind exits without errors after all the other tests in the group are done. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, util, tap: Implement --trace option for extra verbose loggingStefano Brivio2022-03-251-0/+10
| | | | | | | | --debug can be a bit too noisy, especially as single packets or socket messages are logged: implement a new option, --trace, implying --debug, that enables all debug messages. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib/setup: Unshare PID namespace in pasta_setup()Stefano Brivio2022-03-021-4/+8
| | | | | | ...otherwise, we'll leave processes (dhclient) around. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Add demo for Podman with pastaStefano Brivio2022-02-221-1/+20
| | | | | | | | ...showing setup steps, some peculiarities as --net option, and a general side-to-side comparison with slirp4netns(1), including "quick" TCP and UDP throughput and latency benchmarks. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt, pasta: Namespace-based sandboxing, defer seccomp policy applicationStefano Brivio2022-02-211-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib/setup: Don't rely on IFS to properly separate qemu argumentsStefano Brivio2022-01-261-32/+32
| | | | | | ...this gets needlessly annoying while playing with test cases. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/perf: Actually load passt enough to test UDP performanceStefano Brivio2021-10-211-5/+8
| | | | | | | | | With recent improvements, we're not CPU-bound at all while testing UDP performance. Give the VM more memory and CPUs, forward two additional ports, start up to four threads in parallel, and give single iperf3 threads higher bandwidth targets. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib/setup: Increase --max-stackframe in commented-out valgrind commandStefano Brivio2021-10-051-1/+1
| | | | | | ...so that I don't keep fighting with this for pasta clone() calls. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Record CI and demo videos in Xvfb by default, fix demo setup sequenceStefano Brivio2021-09-291-0/+23
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Add CI/demo scriptsStefano Brivio2021-09-271-0/+322
Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>