aboutgitcodebugslistschat
path: root/tcp.h
Commit message (Collapse)AuthorAgeFilesLines
* tcp: rename functions that manage buffersLaurent Vivier2024-03-111-1/+1
| | | | | | | | To separate these functions from the ones specific to TCP management, we are going to move it to a new file, but before that update their names to reflect their role. Signed-off-by: Laurent Vivier <lvivier@redhat.com>
* fwd: Rename port_fwd.[ch] and their contentsDavid Gibson2024-02-291-2/+2
| | | | | | | | | | | | Currently port_fwd.[ch] contains helpers related to port forwarding, particular automatic port forwarding. We're planning to allow much more flexible sorts of forwarding, including both port translation and NAT based on the flow table. This will subsume the existing port forwarding logic, so rename port_fwd.[ch] to fwd.[ch] with matching updates to all the names within. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, udp: Don't precompute port remappings in epoll referencesDavid Gibson2024-02-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | The epoll references for both TCP listening sockets and UDP sockets includes a port number. This gives the destination port that traffic to that socket will be sent to on the other side. That will usually be the same as the socket's bound port, but might not if the -t, -u, -T or -U options are given with different original and forwarded port numbers. As we move towards a more flexible forwarding model for passt, it's going to become possible for that destination port to vary depending on more things (for example the source or destination address). So, it will no longer make sense to have a fixed value for a listening socket. Change to simpler semantics where this field in the reference gives the bound port of the socket. We apply the translations to the correct destination port later on, when we're actually forwarding. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Use sa_family_t for address family variablesDavid Gibson2024-02-271-1/+1
| | | | | | | | | | Sometimes we use sa_family_t for variables and parameters containing a socket address family, other times we use a plain int. Since sa_family_t is what's actually used in struct sockaddr and friends, standardise on that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Standardise on 'now' for current timestamp variablesDavid Gibson2024-01-221-1/+1
| | | | | | | | | In a number of places we pass around a struct timespec representing the (more or less) current time. Sometimes we call it 'now', and sometimes we call it 'ts'. Standardise on the more informative 'now'. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: make tcp_sock_set_bufsize() static (again)Laurent Vivier2023-12-271-1/+0
| | | | | | | | | | | | e5eefe77435a ("tcp: Refactor to use events instead of states, split out spliced implementation") has exported tcp_sock_set_bufsize() to be able to use it in tcp_splice.c, but 6ccab72d9b40 has removed its use in tcp_splice.c, so we can set it static again. Fixes: 6ccab72d9b40 ("tcp: Improve handling of fallback if socket pool is empty on new splice") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: "TCP" hash secret doesn't need to be TCP specificDavid Gibson2023-12-041-2/+0
| | | | | | | | | | | | | The TCP state structure includes a 128-bit hash_secret which we use for SipHash calculations to mitigate attacks on the TCP hash table and initial sequence number. We have plans to use SipHash in places that aren't TCP related, and there's no particular reason they'd need their own secret. So move the hash_secret to the general context structure. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Move TCP connection table to unified flow tableDavid Gibson2023-12-041-5/+0
| | | | | | | | | | | | | We want to generalise "connection" tracking to things other than true TCP connections. Continue implenenting this by renaming the TCP connection table to the "flow table" and moving it to flow.c. The definitions are split between flow.h and flow_table.h - we need this separation to avoid circular dependencies: the definitions in flow.h will be needed by many headers using the flow mechanism, but flow_table.h needs all those protocol specific headers in order to define the full flow table entry. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* pif: Pass originating pif to tap handler functionsDavid Gibson2023-11-071-1/+2
| | | | | | | | | | | For now, packets passed to the various *_tap_handler() functions always come from the single "tap" interface. We want to allow the possibility to broaden that in future. As preparation for that, have the code in tap.c pass the pif id of the originating interface to each of those handler functions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* pif: Record originating pif in listening socket refsDavid Gibson2023-11-071-2/+2
| | | | | | | | | | For certain socket types, we record in the epoll ref whether they're sockets in the namespace, or on the host. We now have the notion of "pif" to indicate what "place" a socket is associated with, so generalise the simple one-bit 'ns' to a pif id. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tap: Correctly advance through packets in tcp_tap_handler()David Gibson2023-09-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | In both tap4_handler() and tap6_handler(), once we've sorted incoming l3 packets into "sequences", we then step through all the packets in each TCP sequence calling tcp_tap_handler(). Or so it appears. In fact, tcp_tap_handler() doesn't take an index and always looks at packet 0 of the sequence, except when it calls tcp_data_from_tap() to process data packets. It appears to be written with the idea that the struct pool is a queue, from which it consumes packets as it processes them, but that's not how the pool data structure works - they are more like an array of packets. We only get away with this, because setup packets for TCP tend to come in separate batches (because we need to reply in between) and so we only get a bunch of packets for the same connection together when they're data packets (tcp_data_from_tap() has its own loop through packets). Correct this by adding an index parameter to tcp_tap_handler() and altering the loops in tap.c to step through the pool properly. Link: https://bugs.passt.top/show_bug.cgi?id=68 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Remove broken pressure calculations for tcp_defer_handler()David Gibson2023-08-221-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | tcp_defer_handler() performs a potentially expensive linear scan of the connection table. So, to mitigate the cost of that we skip if if we're not under at least moderate pressure: either 30% of available connections or 30% (estimated) of available fds used. But, the calculation for this has been broken since it was introduced: we calculate "max_conns" based on c->tcp.conn_count, not TCP_MAX_CONNS, meaning we only exit early if conn_count is less than 30% of itself, i.e. never. If that calculation is "corrected" to be based on TCP_MAX_CONNS, it completely tanks the TCP CRR times for passt - from ~60ms to >1000ms on my laptop. My guess is that this is because in the case of many short lived connections, we're letting the table become much fuller before compacting it. That means that other places which perform a table scan now have to do much, much more. For the time being, simply remove the tests, since they're not doing anything useful. We can reintroduce them more carefully if we see a need for them. This also removes the only user of c->tcp.splice_conn_count, so that can be removed as well. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, udp: Don't pre-fill IPv4 destination address in headersDavid Gibson2023-08-221-2/+1
| | | | | | | | | | | | | | | | | Because packets sent on the tap interface will always be going to the guest/namespace, we more-or-less know what address they'll be going to. So we pre-fill this destination address in our header buffers for IPv4. We can't do the same for IPv6 because we could need either the global or link-local address for the guest. In future we're going to want more flexibility for the destination address, so this pre-filling will get in the way. Change the flow so we always fill in the IPv4 destination address for each packet, rather than prefilling it from proto_update_l2_buf(). In fact for TCP we already redundantly filled the destination for each packet anyway. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: Pass source address to protocol handler functionsDavid Gibson2023-08-221-1/+1
| | | | | | | | | | | The tap code passes the IPv4 or IPv6 destination address of packets it receives to the protocol specific code. Currently that protocol code doesn't use the source address, but we want it to in future. So, in preparation, pass the IPv4/IPv6 source address of tap packets to those functions as well. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Split handling of listening TCP sockets into their own handlerDavid Gibson2023-08-131-8/+17
| | | | | | | | | | | | | | | | | tcp_sock_handler() handles both listening TCP sockets, and connected TCP sockets, but what it needs to do in those cases has essentially nothing in common. Therefore, give listening sockets their own epoll_type value and dispatch directly to their own handler from the top level. Furthermore, the two handlers need essentially entirely different information from the reference: we re-(ab)used the index field in the tcp_epoll_ref to indicate the port for the listening socket, but that's not the same meaning. So, switch listening sockets to their own reference type which we can lay out as we please. That lets us remove the listen and outbound fields from the normal (connected) tcp_epoll_ref, reducing it to just the connection table index. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Split handling of TCP timerfds into its own handler functionDavid Gibson2023-08-131-2/+1
| | | | | | | | | | | | tcp_sock_handler() actually handles several different types of fd events. This includes timerfds that aren't sockets at all. The handling of these has essentially nothing in common with the other cases. So, give the TCP timers there own epoll_type value and dispatch directly to their handler. This also means we can remove the timer field from tcp_epoll_ref, the information it encoded is now implicit in the epoll_type value. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Use C11 anonymous members to make poll refs less verbose to useDavid Gibson2023-08-041-1/+1
| | | | | | | | | | | | union epoll_ref has a deeply nested set of structs and unions to let us subdivide it into the various different fields we want. This means that referencing elements can involve an awkward long string of intermediate fields. Using C11 anonymous structs and unions lets us do this less clumsily. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Relicense to GPL 2.0, or any later versionStefano Brivio2023-04-061-1/+1
| | | | | | | | | | | | | | | | | | | In practical terms, passt doesn't benefit from the additional protection offered by the AGPL over the GPL, because it's not suitable to be executed over a computer network. Further, restricting the distribution under the version 3 of the GPL wouldn't provide any practical advantage either, as long as the passt codebase is concerned, and might cause unnecessary compatibility dilemmas. Change licensing terms to the GNU General Public License Version 2, or any later version, with written permission from all current and past contributors, namely: myself, David Gibson, Laine Stump, Andrea Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Fix definitions of SOCKET_MAX, TCP_MAX_CONNSStefano Brivio2023-02-271-2/+2
| | | | | | | | ...and, given that I keep getting this wrong, add a convenience macro, MAX_FROM_BITS(). Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf, tcp, udp: Exit if we fail to bind sockets for all given portsStefano Brivio2023-02-161-2/+2
| | | | | | | | | | | | | | passt supports ranges of forwarded ports as well as 'all' for TCP and UDP, so it might be convenient to proceed if we fail to bind only some of the desired ports. But if we fail to bind even a single port for a given specification, we're clearly, unexpectedly, conflicting with another network service. In that case, report failure and exit. Reported-by: Yalan Zhang <yalzhang@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* tcp: Move socket pool declarations aroundDavid Gibson2023-02-141-2/+0
| | | | | | | | | | | | | | | | | tcp_splice.c has some explicit extern declarations to access the socket pools. This is pretty dangerous - if we changed the type of these variables in tcp.c, we'd have tcp.c and tcp_splice.c using the same memory in different ways with no compiler error. So, move the extern declarations to tcp_conn.h so they're visible to both tcp.c and tcp_splice.c, but not the rest of pasta. In fact the pools for the guest namespace are necessarily only used by tcp_splice.c - we have no sockets on the guest side if we're not splicing. So move those declarations and the functions that deal exclusively with them to tcp_splice.c Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Remove v6 flag from tcp_epoll_refDavid Gibson2022-11-251-2/+0
| | | | | | | | | | | | | | | | | | | This bit in the TCP specific epoll reference indicates whether the connection is IPv6 or IPv4. However the sites which refer to it are already calling accept() which (optionally) returns an address for the remote end of the connection. We can use the sa_family field in that address to determine the connection type independent of the epoll reference. This does have a cost: for the spliced case, it means we now need to get that address from accept() which introduces an extran copy_to_user(). However, in future we want to allow handling IPv4 connectons through IPv6 sockets, which means we won't be able to determine the IP version at the time we create the listening socket and epoll reference. So, at some point we'll have to pay this cost anyway. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Remove splice from tcp_epoll_refDavid Gibson2022-11-251-2/+0
| | | | | | | | | | | | Currently the epoll reference for tcp sockets includes a bit indicating whether the socket maps to a spliced connection. However, the reference also has the index of the connection structure which also indicates whether it is spliced. We can therefore avoid the splice bit in the epoll_ref by unifying the first part of the non-spliced and spliced handlers where we look up the connection state. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Separate helpers to create ns listening socketsDavid Gibson2022-11-251-2/+2
| | | | | | | | | | | | | | | | | tcp_sock_init*() can create either sockets listening on the host, or in the pasta network namespace (with @ns==1). There are, however, a number of differences in how these two cases work in practice though. "ns" sockets are only used in pasta mode, and they always lead to spliced connections only. The functions are also only ever called in "ns" mode with a NULL address and interface name, and it doesn't really make sense for them to be called any other way. Later changes will introduce further differences in behaviour between these two cases, so it makes more sense to use separate functions for creating the ns listening sockets than the regular external/host listening sockets. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Unify spliced and non-spliced connection tablesDavid Gibson2022-11-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Currently spliced and non-spliced connections are stored in completely separate tables, so there are completely independent limits on the number of spliced and non-spliced connections. This is a bit counter-intuitive. More importantly, the fact that the tables are separate prevents us from unifying some other logic between the two cases. So, merge these two tables into one, using the 'c.spliced' common field to distinguish between them when necessary. For now we keep a common limit of 128k connections, whether they're spliced or non-spliced, which means we save memory overall. If necessary we could increase this to a 256k or higher total, which would cost memory but give some more flexibility. For now, the code paths which need to step through all extant connections are still separate for the two cases, just skipping over entries which aren't for them. We'll improve that in later patches. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Remove unused TCP_MAX_SOCKS constantDavid Gibson2022-11-251-1/+0
| | | | | | | Presumably it meant something in the past, but it's no longer used. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Use typing to reduce chances of IPv4 endianness errorsDavid Gibson2022-11-041-1/+1
| | | | | | | | | | | | | | | | | | | We recently corrected some errors handling the endianness of IPv4 addresses. These are very easy errors to make since although we mostly store them in network endianness, we sometimes need to manipulate them in host endianness. To reduce the chances of making such mistakes again, change to always using a (struct in_addr) instead of a bare in_addr_t or uint32_t to store network endian addresses. This makes it harder to accidentally do arithmetic or comparisons on such addresses as if they were host endian. We introduce a number of IN4_IS_ADDR_*() helpers to make it easier to directly work with struct in_addr values. This has the additional benefit of making the IPv4 and IPv6 paths more visually similar. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tcp_splice: Fix port remapping for inbound, spliced connectionsStefano Brivio2022-10-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | In pasta mode, when we receive a new inbound connection, we need to select a socket that was created in the namespace to proceed and connect() it to its final destination. The existing condition might pick a wrong socket, though, if the destination port is remapped, because we'll check the bitmap of inbound ports using the remapped port (stored in the epoll reference) as index, and not the original port. Instead of using the port bitmap for this purpose, store this information in the epoll reference itself, by adding a new 'outbound' bit, that's set if the listening socket was created the namespace, and unset otherwise. Then, use this bit to pick a socket on the right side. Suggested-by: David Gibson <david@gibson.dropbear.id.au> Fixes: 33482d5bf293 ("passt: Add PASTA mode, major rework") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf, tcp, udp: Allow specification of interface to bind toStefano Brivio2022-10-151-1/+1
| | | | | | | | | | | | | | | | Since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can bind sockets to interfaces, if they haven't been bound yet (as in bind()). Introduce an optional interface specification for forwarded ports, prefixed by %, that can be passed together with an address. Reported use case: running local services that use ports we want to have externally forwarded: https://github.com/containers/podman/issues/14425 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* Don't use indirect remap functions for conf_ports()David Gibson2022-09-241-2/+0
| | | | | | | | | | Now that we've delayed initialization of the UDP specific "reverse" map until udp_init(), the only difference between the various 'remap' functions used in conf_ports() is which array they target. So, simplify by open coding the logic into conf_ports() with a pointer to the correct mapping array. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Consolidate port forwarding configuration into a common structureDavid Gibson2022-09-241-9/+6
| | | | | | | | | | | | | | | The configuration for how to forward ports in and out of the guest/ns is divided between several different variables. For each connect direction and protocol we have a mode in the udp/tcp context structure, a bitmap of which ports to forward also in the context structure and an array of deltas to apply if the outward facing and inward facing port numbers are different. This last is a separate global variable, rather than being in the context structure, for no particular reason. UDP also requires an additional array which has the reverse mapping used for return packets. Consolidate these into a re-used substructure in the context structure. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Improve types and names for port forwarding configurationDavid Gibson2022-09-241-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | enum conf_port_type is local to conf.c and is used to track the port forwarding mode during configuration. We don't keep it around in the context structure, however the 'init_detect_ports' and 'ns_detect_ports' fields in the context are based solely on this. Rather than changing encoding, just include the forwarding mode into the context structure. Move the type definition to a new port_fwd.h, which is kind of trivial at the moment but will have more stuff later. While we're there, "conf_port_type" doesn't really convey that this enum is describing how port forwarding is configured. Rename it to port_fwd_mode. The variables (now fields) of this type also have mildly confusing names since it's not immediately obvious whether 'ns' and 'init' refer to the source or destination of the packets. Use "in" (host to guest / init to ns) and "out" (guest to host / ns to init) instead. This has the added bonus that we no longer have locals 'udp_init' and 'tcp_init' which shadow global functions. In addition, add a typedef 'port_fwd_map' for a bitmap of each port number, which is used in several places. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* conf, tcp, udp: Arrays for ports need 2^16 values, not 2^16-8Stefano Brivio2022-09-221-2/+2
| | | | | | | | | | | | Reported by David but also by Coverity (CWE-119): In conf_ports: Out-of-bounds access to a buffer ...not in practice, because the allocation size is rounded up anyway, but not nice either. Reported-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, tcp, udp: Allow address specification for forwarded portsStefano Brivio2022-05-011-1/+3
| | | | | | | | | | | | | This feature is available in slirp4netns but was missing in passt and pasta. Given that we don't do dynamic memory allocation, we need to bind sockets while parsing port configuration. This means we need to process all other options first, as they might affect addressing and IP version support. It also implies a minor rework of how TCP and UDP implementations bind sockets. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Mark constant references as constStefano Brivio2022-03-291-6/+6
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Packet abstraction with mandatory boundary checksStefano Brivio2022-03-291-11/+5
| | | | | | | | | | | | | | | | | | | | Implement a packet abstraction providing boundary and size checks based on packet descriptors: packets stored in a buffer can be queued into a pool (without storage of its own), and data can be retrieved referring to an index in the pool, specifying offset and length. Checks ensure data is not read outside the boundaries of buffer and descriptors, and that packets added to a pool are within the buffer range with valid offset and indices. This implies a wider rework: usage of the "queueing" part of the abstraction mostly affects tap_handler_{passt,pasta}() functions and their callees, while the "fetching" part affects all the guest or tap facing implementations: TCP, UDP, ICMP, ARP, NDP, DHCP and DHCPv6 handlers. Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Fit struct tcp_conn into a single 64-byte cachelineStefano Brivio2022-03-291-2/+3
| | | | | | | | | | | | | | | | | | | | | | ...by: - storing the chained-hash next connection pointer as numeric reference rather than as pointer - storing the MSS as 14-bit value, and rounding it - using only the effective amount of bits needed to store the hash bucket number - explicitly limiting window scaling factors to 4-bit values (maximum factor is 14, from RFC 7323) - scaling SO_SNDBUF values, and using a 8-bit representation for the duplicate ACK sequence - keeping window values unscaled, as received and sent Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Rework timers to use timerfd instead of periodic bitmap scanStefano Brivio2022-03-291-2/+6
| | | | | | | | | | | | | | | | | | With a lot of concurrent connections, the bitmap scan approach is not really sustainable. Switch to per-connection timerfd timers, set based on events and on two new flags, ACK_FROM_TAP_DUE and ACK_TO_TAP_DUE. Timers are added to the common epoll list, and implement the existing timeouts. While at it, drop the CONN_ prefix from flag names, otherwise they get quite long, and fix the logic to decide if a connection has a local, possibly unreachable endpoint: we shouldn't go through the rest of tcp_conn_from_tap() if we reset the connection due to a successful bind(2), and we'll get EACCES if the port number is low. Suggested by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Refactor to use events instead of states, split out spliced implementationStefano Brivio2022-03-281-3/+7
| | | | | | | | | | | | | | | | | | | | | Using events and flags instead of states makes the implementation much more straightforward: actions are mostly centered on events that occurred on the connection rather than states. An example is given by the ESTABLISHED_SOCK_FIN_SENT and FIN_WAIT_1_SOCK_FIN abominations: we don't actually care about which side started closing the connection to handle closing of connection halves. Split out the spliced implementation, as it has very little in common with the "regular" TCP path. Refactor things here and there to improve clarity. Add helpers to trace where resets and flag settings come from. No functional changes intended. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Fix build with gcc 7, use std=c99, enable some more Clang checkersStefano Brivio2021-10-211-1/+1
| | | | | | | | | | | | | | Unions and structs, you all have names now. Take the chance to enable bugprone-reserved-identifier, cert-dcl37-c, and cert-dcl51-cpp checkers in clang-tidy. Provide a ffsl() weak declaration using gcc built-in. Start reordering includes, but that's not enough for the llvm-include-order checker yet. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Makefile, tcp: Don't try to use tcpi_snd_wnd from tcp_info on pre-5.3 kernelsStefano Brivio2021-10-211-0/+2
| | | | | | | Detect missing tcpi_snd_wnd in struct tcp_info at build time, otherwise build fails with a pre-5.3 linux/tcp.h header. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Add clang-tidy Makefile target and test, take care of warningsStefano Brivio2021-10-201-2/+2
| | | | | | | Most are just about style and form, but a few were actually serious mistakes (NDP-related). Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* LICENSES: Add license text files, add missing notices, fix SPDX tagsStefano Brivio2021-10-201-0/+5
| | | | | | | | | | SPDX tags don't replace license files. Some notices were missing and some tags were not according to the SPDX specification, too. Now reuse --lint from the REUSE tool (https://reuse.software/) passes. Reported-by: Martin Hauke <mardnh@gmx.de> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Defer and coalesce all segments with no data (flags) to handlerStefano Brivio2021-10-051-0/+1
| | | | | | | | | | ...using pre-cooked buffers, just like we do with other segments. While at it, remove some code duplication by having separate functions for updating ACK sequence and window, and for filling in buffer headers. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tap: Turn tcp_probe_mem() into sock_probe_mem(), use for AF_UNIX socket tooStefano Brivio2021-10-051-4/+0
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Probe net.core.{r,w}mem_max, don't set SO_{RCV,SND}BUF if lowStefano Brivio2021-10-041-0/+4
| | | | | | | | | | | | | | | If net.core.rmem_max and net.core.wmem_max sysctls have low values, we can get bigger buffers by not trying to set them high -- the kernel would lock their values to what we get. Try, instead, to get bigger buffers by queueing as much as possible, and if maximum values in tcp_wmem and tcp_rmem are bigger than this, that will work. While at it, drop QUICKACK option for non-spliced sockets, I set that earlier by mistake. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, tcp: Periodic detection of bound ports for pasta port forwardingStefano Brivio2021-09-271-0/+6
| | | | | | | | | | Detecting bound ports at start-up time isn't terribly useful: do this periodically instead, if configured. This is only implemented for TCP at the moment, UDP is somewhat more complicated: leave a TODO there. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipesStefano Brivio2021-09-271-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt, pasta: Introduce command-line options and port re-mappingStefano Brivio2021-09-011-12/+6
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Introduce scatter-gather IO path from socket to tapStefano Brivio2021-07-261-0/+2
| | | | | | | | | | | | | | | | | ...similarly to what was done for UDP. Quick performance test with 32KiB buffers, host to VM: $ iperf3 -c 192.0.2.2 -N [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 8.47 GBytes 7.27 Gbits/sec 0 sender [ 5] 0.00-10.00 sec 8.45 GBytes 7.26 Gbits/sec receiver $ iperf3 -c 2a01:598:88ba:a056:271f:473a:c0d9:abc1 [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 8.43 GBytes 7.24 Gbits/sec 0 sender [ 5] 0.00-10.00 sec 8.41 GBytes 7.22 Gbits/sec receiver Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:29:04 +0000