aboutgitcodebugslistschat
path: root/tcp.c
Commit message (Collapse)AuthorAgeFilesLines
* tcp: Validate TCP endpoint addressesDavid Gibson2024-02-291-7/+67
| | | | | | | | | | | | | | | | | | | | | | | | | TCP connections should typically not have wildcard addresses (0.0.0.0 or ::) nor a zero port number for either endpoint. It's not entirely clear (at least to me) if it's strictly against the RFCs to do so, but at any rate the socket interfaces often treat those values specially[1], so it's not really possible to manipulate such connections. Likewise they should not have broadcast or multicast addresses for either endpoint. However, nothing prevents a guest from creating a SYN packet with such values, and it's not entirely clear what the effect on passt would be. To ensure sane behaviour, explicitly check for this case and drop such packets, logging a debug warning (we don't want a higher level, because that would allow a guest to spam the logs). We never expect such an address on an accept()ed socket either, but just in case, check for it as well. [1] Depending on context as "unknown", "match any" or "kernel, pick something for me" Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tcp_splice: Parse listening socket epoll ref in tcp_listen_handler()David Gibson2024-02-291-6/+6
| | | | | | | | | | | | | | | tcp_listen_handler() uses the epoll reference for the listening socket it handles, and also passes on one variant of it to tcp_tap_conn_from_sock() and tcp_splice_conn_from_sock(). The latter two functions only need a couple of specific fields from the reference. Pass those specific values instead of the whole reference, which localises the handling of the listening (as opposed to accepted) socket and its reference entirely within tcp_listen_handler(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp_splice: Improve logic deciding when to spliceDavid Gibson2024-02-291-2/+1
| | | | | | | | | | | | | | | | | This makes several tweaks to improve the logic which decides whether we're able to use the splice method for a new connection. * Rather than only calling tcp_splice_conn_from_sock() in pasta mode, we check for pasta mode within it, better localising the checks. * Previously if we got a connection from a non-loopback address we'd always fall back to the "tap" path, even if the connection was on a socket in the namespace. If we did get a non-loopback address on a namespace socket, something has gone wrong and the "tap" path certainly won't be able to handle it. Report the error and close, rather than passing it along to tap. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow: Clarify flow entry life cycle, introduce uniform loggingDavid Gibson2024-02-291-8/+7
| | | | | | | | | | | | | | | | | | | Our allocation scheme for flow entries means there are some non-obvious constraints on when what things can be done with an entry. Add a big doc comment explaining the life cycle. In addition, make a FLOW_START() macro to mark one of the important transitions. This encourages correct usage, by making it natural to only access the flow type specific structure after calling it. It also logs that a new flow has been created, which is useful for debugging. We also add logging when a flow's lifecycle ends. This doesn't need a new helper, because it can only happen either from flow_alloc_cancel() or from the flow deferred handler. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, udp: Don't precompute port remappings in epoll referencesDavid Gibson2024-02-291-4/+4
| | | | | | | | | | | | | | | | | | | | | | The epoll references for both TCP listening sockets and UDP sockets includes a port number. This gives the destination port that traffic to that socket will be sent to on the other side. That will usually be the same as the socket's bound port, but might not if the -t, -u, -T or -U options are given with different original and forwarded port numbers. As we move towards a more flexible forwarding model for passt, it's going to become possible for that destination port to vary depending on more things (for example the source or destination address). So, it will no longer make sense to have a fixed value for a listening socket. Change to simpler semantics where this field in the reference gives the bound port of the socket. We apply the translations to the correct destination port later on, when we're actually forwarding. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* inany: Introduce union sockaddr_inanyDavid Gibson2024-02-291-6/+5
| | | | | | | | | | | | | | | | | | There are a number of places where we want to handle either a sockaddr_in or a sockaddr_in6. In some of those we use a void *, which works ok and matches some standard library interfaces, but doesn't give a signature level hint that we're dealing with only sockaddr_in or sockaddr_in6, not (say) sockaddr_un or another type of socket address. Other places we use a sockaddr_storage, which also works, but has the same problem in addition to allocating more on the stack than we need to. Introduce union sockaddr_inany to explictly handle this case: it has variants for sockaddr_in and sockaddr_in6. Use it in a number of places where it's easy to do so. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* inany: Provide more conveniently typed constants for special addressesDavid Gibson2024-02-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Our inany_addr type is used in some places to represent either IPv4 or IPv6 addresses, and we plan to use it more widely. We don't yet provide constants of this type for special addresses (loopback and "any"). Add some of these, both the IPv4 and IPv6 variants of those addresses, but typed as union inany_addr. To avoid actually adding more things to .data we can use some macros and casting to overlay the IPv6 versions of these with the standard library's in6addr_loopback and in6addr_any. For the IPv4 versions we need to create new constant globals. For complicated historical reasons, the standard library doesn't provide constants for IPv4 loopback and any addresses as struct in_addr. It just has macros of type in_addr_t == uint32_t, which has some gotchas w.r.t. endianness. We can use some more macros to address this lack, using macros to effectively create these IPv4 constants as pieces of the inany constants above. We use this last to avoid some awkward temporary variables just used to get an address of an IPv4 loopback address. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Don't store errnos in socket poolDavid Gibson2024-02-271-2/+6
| | | | | | | | | | | | | | | | | | If tcp_sock_refill_pool() gets an error opening new sockets, it stores the negative errno of that error in the socket pool. This isn't especially useful: * It's inconsistent with the initial state of the pool (all -1) * It's inconsistent with the state of an entry that was valid and was then consumed (also -1) * By the time we did anything with this error code, it's now far removed from the situation in which the error occurred, making it difficult to report usefully We now have error reporting closer to when failures happen on the refill paths, so just leave a pool slot we can't fill as -1. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tcp_splice: Helpers for getting sockets from the poolsDavid Gibson2024-02-271-5/+29
| | | | | | | | | | | | | | We maintain pools of ready-to-connect sockets in both the original and (for pasta) guest namespace to reduce latency when starting new TCP connections. If we exhaust those pools we have to take a higher latency path to get a new socket. Currently we open-code that fallback in the places we need it. To improve clarity encapsulate that into helper functions. While we're at it, give those helpers clearer error reporting. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tcp_splice: Issue warnings if unable to refill socket poolDavid Gibson2024-02-271-6/+18
| | | | | | | | | | | | | | | Currently if tcp_sock_refill_pool() is unable to fill all the slots in the pool, it will silently exit. This might lead to a later attempt to get fds from the pool to fail at which point it will be harder to tell what originally went wrong. Instead add warnings if we're unable to refill any of the socket pools when requested. We have tcp_sock_refill_pool() return an error and report it in the callers, because those callers have more context allowing for a more useful message. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Stop on first error when refilling socket poolsDavid Gibson2024-02-271-1/+2
| | | | | | | | | | | | | | Currently if we get an error opening a new socket while refilling a socket pool, we carry on to the next slot and try again. This isn't very useful, since by far the most likely cause of an error is some sort of resource exhaustion. Trying again will probably just hit the same error, and maybe even make things worse. So, instead stop on the first error while refilling the pool, making do with however many sockets we managed to open before the error. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Don't stop refilling socket pool if we find a filled entryDavid Gibson2024-02-271-1/+1
| | | | | | | | | | | | | | | | | | | Currently tcp_sock_refill_pool() stops as soon as it finds an entry in the pool with a valid fd. This appears to makes sense: we always use fds from the front of the pool, so if we find a filled one, the rest of the pool should be filled as well. However, that's not quite correct. If a previous refill hit errors trying to open new sockets, it could leave gaps between blocks of valid fds. We're going to add some changes that could make that more likely. So, for robustness, instead skip over the filled entry but still try to refill the rest of the array. We expect simply iterating over the pool to be of small cost compared to even a single system call, so this shouldn't have much impact. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Use sa_family_t for address family variablesDavid Gibson2024-02-271-6/+6
| | | | | | | | | | Sometimes we use sa_family_t for variables and parameters containing a socket address family, other times we use a plain int. Since sa_family_t is what's actually used in struct sockaddr and friends, standardise on that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Fix subtle bug in fast re-transmit pathDavid Gibson2024-02-111-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When a duplicate ack from the tap side triggers a fast re-transmit, we set both conn->seq_ack_from_tap and conn->seq_to_tap to the sequence number of the duplicate ack. Setting seq_to_tap is correct: this is what triggers the retransmit from this point onwards. Setting seq_ack_from_tap is not correct, though. In most cases setting seq_ack_from_tap will be redundant but harmless: it will have already been updated to the same value by tcp_update_seqack_from_tap() a few lines above. However that call can be skipped if tcp_sock_consume() fails, which is rare but possible. In that case this update will cause problems. We use seq_ack_from_tap to track two logically distinct things: how much of the stream has been acked by the guest, and how much of the stream from the socket has been read and discarded (as opposed to MSG_PEEKed). We attempt to keep those values the same, because we discard data exactly when it is acked by the guest. However tcp_sock_consume() failing means we weren't able to disard the acked data. To handle that case, we skip the usual update of seq_ack_from_tap, effectively ignoring the ack assuming we'll get one which supersedes it soon enough. Setting seq_ack_from_tap in the fast retransmit path, however, means we now really will have the read/discard point in the stream out of sync with seq_ack_from_tap. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow: Avoid moving flow entries to compact tableDavid Gibson2024-01-221-23/+0
| | | | | | | | | | | | | | | | | | | | Currently we always keep the flow table maximally compact: that is all the active entries are contiguous at the start of the table. Doing this sometimes requires moving an entry when one is freed. That's kind of fiddly, and potentially expensive: it requires updating the hash table for the new location, and depending on flow type, it may require EPOLL_CTL_MOD, system calls to update epoll tags with the new location too. Implement a new way of managing the flow table that doesn't ever move entries. It attempts to maintain some compactness by always using the first free slot for a new connection, and mitigates the effect of non compactness by cheaply skipping over contiguous blocks of free entries. See the "theory of operation" comment in flow.c for details. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>b [sbrivio: additional ASSERT(flow_first_free <= FLOW_MAX - 2) to avoid Coverity Scan false positive] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow: Enforce that freeing of closed flows must happen in deferred handlersDavid Gibson2024-01-221-4/+5
| | | | | | | | | | | | | | | | Currently, flows are only evern finally freed (and the table compacted) from the deferred handlers. Some future ways we want to optimise managing the flow table will rely on this, so enforce it: rather than having the TCP code directly call flow_table_compact(), add a boolean return value to the per-flow deferred handlers. If true, this indicates that the flow code itself should free the flow. This forces all freeing of flows to occur during the flow code's scan of the table in flow_defer_handler() which opens possibilities for future optimisations. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow: Abstract allocation of new flows with helper functionDavid Gibson2024-01-221-11/+18
| | | | | | | | | | | | | | | | | | Currently tcp.c open codes the process of allocating a new flow from the flow table: twice, in fact, once for guest to host and once for host to guest connections. This duplication isn't ideal and will get worse as we add more protocols to the flow table. It also makes it harder to experiment with different ways of handling flow table allocation. Instead, introduce a function to allocate a new flow: flow_alloc(). In some cases we currently check if we're able to allocate, but delay the actual allocation. We now handle that slightly differently with a flow_alloc_cancel() function to back out a recent allocation. We have that separate from a flow_free() function, because future changes we have in mind will need to handle this case a little differently. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow: Move flow_count from context structure to a globalDavid Gibson2024-01-221-5/+5
| | | | | | | | | | | | | | | In general, the passt code is a bit haphazard about what's a true global variable and what's in the quasi-global 'context structure'. The flow_count field is one such example: it's in the context structure, although it's really part of the same data structure as flowtab[], which is a genuine global. Move flow_count to be a regular global to match. For now it needs to be public, rather than static, but we expect to be able to change that in future. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tcp_splice: Avoid double layered dispatch for connected TCP socketsDavid Gibson2024-01-221-28/+8
| | | | | | | | | | | Currently connected TCP sockets have the same epoll type, whether they're for a "tap" connection or a spliced connection. This means that tcp_sock_handler() has to do a secondary check on the type of the connection to call the right function. We can avoid this by adding a new epoll type and dispatching directly to the right thing. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Add handling for per-flow timersDavid Gibson2024-01-221-6/+0
| | | | | | | | | | | | | | | | | | | tcp_timer() scans the flow table so that it can run tcp_splice_timer() on each spliced connection. More generally, other flow types might want to run similar timers in future. We could add a flow_timer() analagous to tcp_timer(), udp_timer() etc. However, this would need to scan the flow table, which we would have just done in flow_defer_handler(). We'd prefer to just scan the flow table once, dispatching both per-flow deferred events and per-flow timed events if necessary. So, extend flow_defer_handler() to do this. For now we use the same timer interval for all flow types (1s). We can make that more flexible in future if we need to. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Add flow-centric dispatch for deferred flow handlingDavid Gibson2024-01-221-17/+2
| | | | | | | | | | | | | | | tcp_defer_handler(), amongst other things, scans the flow table and does some processing for each TCP connection. When we add other protocols to the flow table, they're likely to want some similar scanning. It makes more sense for cache friendliness to perform a single scan of the flow table and dispatch to the protocol specific handlers, rather than having each protocol separately scan the table. To that end, add a new flow_defer_handler() handling all flow-linked deferred operations. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tcp_splice: Move per-type cleanup logic into per-type helpersDavid Gibson2024-01-221-6/+7
| | | | | | | | | | tcp_conn_destroy() and tcp_splice_destroy() are always called conditionally on the connection being closed or closing. Move that logic into the "destroy" functions themselves, renaming them tcp_flow_defer() and tcp_splice_flow_defer(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tcp_splice: Remove redundant handling from tcp_timer()David Gibson2024-01-221-13/+2
| | | | | | | | | | | | | | tcp_timer() scans the connection table, expiring "tap" connections and calling tcp_splice_timer() for "splice" connections. tcp_splice_timer() expires spliced connections and then does some other processing. However, tcp_timer() is always called shortly after tcp_defer_handler() (from post_handler()), which also scans the flow table expiring both tap and spliced connections. So remove the redundant handling, and only do the extra tcp_splice_timer() work from tcp_timer(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Standardise on 'now' for current timestamp variablesDavid Gibson2024-01-221-3/+3
| | | | | | | | | In a number of places we pass around a struct timespec representing the (more or less) current time. Sometimes we call it 'now', and sometimes we call it 'ts'. Standardise on the more informative 'now'. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow: Make flow_table.h #include the protocol specific headers it needsDavid Gibson2024-01-221-1/+0
| | | | | | | | | | | | | | | | | | | | flow_table.h, the lower level flow header relies on having the struct definitions for every protocol specific flow type - so far that means tcp_conn.h. It doesn't include it itself, so tcp_conn.h must be included before flow_table.h. That's ok for now, but as we use the flow table for more things, flow_table.h will need the structs for all of them, which means the protocol specific .c files would need to include tcp_conn.h _and_ the equivalents for every other flow type before flow_table.h every time, which is weird. So, although we *mostly* lean towards the include style where .c files need to handle the include dependencies, in this case it makes more sense to have flow_table.h include all the protocol specific headers it needs. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Make a bunch of pointer variables pointers to constDavid Gibson2024-01-161-4/+4
| | | | | | | | | | Sufficiently recent cppcheck (I'm using 2.13.0) seems to have added another warning for pointer variables which could be pointer to const but aren't. Use this to make a bunch of variables const pointers where they previously weren't for no particular reason. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: make tcp_sock_set_bufsize() static (again)Laurent Vivier2023-12-271-1/+1
| | | | | | | | | | | | e5eefe77435a ("tcp: Refactor to use events instead of states, split out spliced implementation") has exported tcp_sock_set_bufsize() to be able to use it in tcp_splice.c, but 6ccab72d9b40 has removed its use in tcp_splice.c, so we can set it static again. Fixes: 6ccab72d9b40 ("tcp: Improve handling of fallback if socket pool is empty on new splice") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Use IN4ADDR_LOOPBACK_INIT more widelyDavid Gibson2023-12-271-1/+1
| | | | | | | | | | | We already define IN4ADDR_LOOPBACK_INIT to initialise a struct in_addr to the loopback address without delving into its internals. However there are some places we don't use it, and explicitly look at the internal structure of struct in_addr, which we generally want to avoid. Use the define more widely to avoid that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Fix address type for tcp_sock_init_af()David Gibson2023-12-271-1/+1
| | | | | | | | | | | | | | This takes a struct in_addr * (i.e. an IPv4 address), although it's explicitly supposed to handle IPv6 as well. Both its caller and sock_l4() which it calls use a void * for the address, which can be either an in_addr or an in6_addr. We get away with this, because we don't do anything with the pointer other than transfer it from the caller to sock_l4(), but it's misleading. And quite possibly technically UB, because C is like that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Don't account for hash table size in tcp_hash()David Gibson2023-12-271-13/+10
| | | | | | | | | | | | | | | Currently tcp_hash() returns the hash bucket for a value, that is the hash modulo the size of the hash table. Usually it's a bit more flexible to have hash functions return a "raw" hash value and perform the modulus in the callers. That allows the same hash function to be used for multiple tables of different sizes, or to re-use the hash for other purposes. We don't do anything like that with tcp_hash() at present, but we have some plans to do so. Prepare for that by making tcp_hash() and tcp_conn_hash() return raw hash values. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Implement hash table with indices rather than pointersDavid Gibson2023-12-271-11/+22
| | | | | | | | | | | | | We implement our hash table with pointers to the entry for each bucket (or NULL). However, the entries are always allocated within the flow table, meaning that a flow index will suffice, halving the size of the hash table. For TCP, just a flow index would be enough, but future uses will want to expand the hash table to cover indexing either side of a flow, so use a flow_sidx_t as the type for each hash bucket. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Switch hash table to linear probing instead of chainingDavid Gibson2023-12-271-54/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we deal with hash collisions by letting a hash bucket contain multiple entries, forming a linked list using an index in the connection structure. That's a pretty standard and simple approach, but in our case we can use an even simpler one: linear probing. Here if a hash bucket is occupied we just move onto the next one until we find a feww one. This slightly simplifies lookup and more importantly saves some precious bytes in the connection structure by removing the need for a link. It does require some additional complexity for hash removal. This approach can perform poorly with hash table load is high. However, we already size our hash table of pointers larger than the connection table, which puts an upper bound on the load. It's relatively cheap to decrease that bound if we find we need to. I adapted the linear probing operations from Knuth's The Art of Computer Programming, Volume 3, 2nd Edition. Specifically Algorithm L and Algorithm R in Section 6.4. Note that there is an error in Algorithm R as printed, see errata at [0]. [0] https://www-cs-faculty.stanford.edu/~knuth/all3-prepre.ps.gz Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Fix conceptually incorrect byte-order switch in tcp_tap_handler()David Gibson2023-12-271-1/+1
| | | | | | | | | | | | | | tcp_hash_lookup() expects the port numbers in host order, but the TCP header, of course, has them in network order, so we need to switch them. However we call htons() (host to network) instead of ntohs() (network to host). This works because those do the same thing in practice (they only wouldn't on very strange theoretical platforms which are neither big nor little endian). But, having this the "wrong" way around is misleading, so switch it around. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Cast timeval fields to unsigned long long for printingStefano Brivio2023-12-271-2/+3
| | | | | | | | | | | | On x32, glibc defines time_t and suseconds_t (the latter, also known as __syscall_slong_t) as unsigned long long, whereas "everywhere else", including x86_64 and i686, those are unsigned long. See also https://sourceware.org/bugzilla/show_bug.cgi?id=16437 for all the gory details. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Don't defer hash table removal2023_12_04.b86afe3David Gibson2023-12-041-3/+7
| | | | | | | | | | | | | | | | | | | When a TCP connection is closed, we mark it by setting events to CLOSED, then some time later we do final cleanups: closing sockets, removing from the hash table and so forth. This does mean that when making a hash lookup we need to exclude any apparent matches that are CLOSED, since they represent a stale connection. This can happen in practice if one connection closes and a new one with the same endpoints is started shortly afterward. Checking for CLOSED is quite specific to TCP however, and won't work when we extend the hash table to more general flows. So, alter the code to immediately remove the connection from the hash table when CLOSED, although we still defer closing sockets and other cleanup. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: "TCP" hash secret doesn't need to be TCP specificDavid Gibson2023-12-041-33/+2
| | | | | | | | | | | | | The TCP state structure includes a 128-bit hash_secret which we use for SipHash calculations to mitigate attacks on the TCP hash table and initial sequence number. We have plans to use SipHash in places that aren't TCP related, and there's no particular reason they'd need their own secret. So move the hash_secret to the general context structure. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow,tcp: Use epoll_ref type including flow and sideDavid Gibson2023-12-041-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently TCP uses the 'flow' epoll_ref field for both connected sockets and timers, which consists of just the index of the relevant flow (connection). This is just fine for timers, for while it obviously works, it's subtly incomplete for sockets on spliced connections. In that case we want to know which side of the connection the event is occurring on as well as which connection. At present, we deduce that information by looking at the actual fd, and comparing it to the fds of the sockets on each side. When we use the flow table for more things, we expect more cases where something will need to know a specific side of a specific flow for an event, but nothing more. Therefore add a new 'flowside' epoll_ref field, with exactly that information. We use it for TCP connected sockets. This allows us to directly know the side for spliced connections. For "tap" connections, it's pretty meaningless, since the side is always the socket side. It still makes logical sense though, and it may become important for future flow table work. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow,tcp: Generalise TCP epoll_ref to generic flowsDavid Gibson2023-12-041-5/+5
| | | | | | | | | | | | | | TCP uses three different epoll object types: one for connected sockets, one for timers and one for listening sockets. Listening sockets really need information that's specific to TCP, so need their own epoll_ref field. Timers and connected sockets, however, only need the connection (flow) they're associated with. As we expand the use of the flow table, we expect that to be true for more epoll fds. So, rename the "TCP" epoll_ref field to be a "flow" epoll_ref field that can be used both for TCP and for other future cases. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Remove unneccessary bounds check in tcp_timer_handler()David Gibson2023-12-041-2/+2
| | | | | | | | | In tcp_timer_handler() we use conn_at_idx() to interpret the flow index from the epoll reference. However, this will never be NULL - we always put a valid index into the epoll_ref. Simplify slightly based on this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Add logging helpers for connection related messagesDavid Gibson2023-12-041-44/+38
| | | | | | | | | | | | | | | | | | | Most of the messages logged by the TCP code (be they errors, debug or trace messages) are related to a specific connection / flow. We're fairly consistent about prefixing these with the type of connection and the connection / flow index. However there are a few places where we put the index later in the message or omit it entirely. The template with the prefix is also a little bulky to carry around for every message, particularly for spliced connections. To help keep this consistent, introduce some helpers to log messages linked to a specific flow. It takes the flow as a parameter and adds a uniform prefix to each message. This makes things slightly neater now, but more importantly will help keep formatting consistent as we add more things to the flow table. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow: Make unified version of flow table compactionDavid Gibson2023-12-041-42/+4
| | | | | | | | | | | tcp_table_compact() will move entries in the connection/flow table to keep it compact when other entries are removed. The moved entries need not have the same type as the flow removed, so it needs to be able to handle moving any type of flow. Therefore, move it to flow.c rather than being purportedly TCP specific. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Consolidate flow pointer<->index helpersDavid Gibson2023-12-041-34/+33
| | | | | | | | | | | | | | | | | | | Both tcp.c and tcp_splice.c define CONN_IDX() variants to find the index of their connection structures in the connection table, now become the unified flow table. We can easily combine these into a common helper. While we're there, add some trickery for some additional type safety. They also define their own CONN() versions, which aren't so easily combined since they need to return different types, but we can have them use a common helper. In the process, we standardise on always using an unsigned type to store the connection / flow index, which makes more sense. tcp.c's conn_at_idx() remains for now, but we change its parameter to unsigned to match. That in turn means we can remove a check for negative values from it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Move TCP connection table to unified flow tableDavid Gibson2023-12-041-45/+42
| | | | | | | | | | | | | We want to generalise "connection" tracking to things other than true TCP connections. Continue implenenting this by renaming the TCP connection table to the "flow table" and moving it to flow.c. The definitions are split between flow.h and flow_table.h - we need this separation to avoid circular dependencies: the definitions in flow.h will be needed by many headers using the flow mechanism, but flow_table.h needs all those protocol specific headers in order to define the full flow table entry. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Generalise connection typesDavid Gibson2023-12-041-18/+45
| | | | | | | | | | | | Currently TCP connections use a 1-bit selector, 'spliced', to determine the rest of the contents of the structure. We want to generalise the TCP connection table to other types of flows in other protocols. Make a start on this by replacing the tcp_conn_common structure with a new flow_common structure with an enum rather than a simple boolean indicating the type of flow. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: remove useless assignmentLaurent Vivier2023-12-041-1/+0
| | | | | | | | | | | | | | | | | | | | In tcp_send_flag(), a4826ee04b76 has replaced: th->doff = sizeof(*th) / 4; th->doff += OPT_MSS_LEN / 4; th->doff += (1 + OPT_WS_LEN) / 4; by optlen = OPT_MSS_LEN + 1 + OPT_WS_LEN; th->doff = (sizeof(*th) + optlen) / 4; but forgot to remove the useless "th->doff += (1 + OPT_WS_LEN) / 4;" Fixes: a4826ee04b76 ("tcp: Defer and coalesce all segments with no data (flags) to handler") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Use 'z' length modifier for size_t/ssize_t conversionsStefano Brivio2023-12-021-1/+2
| | | | | | | | Types size_t and ssize_t are not necessarily long, it depends on the architecture. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* valgrind: Adjust suppression for MSG_TRUNC with NULL bufferDavid Gibson2023-11-191-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | valgrind complains if we pass a NULL buffer to recv(), even if we use MSG_TRUNC, in which case it's actually safe. For a long time we've had a valgrind suppression for this. It singles out the recv() in tcp_sock_consume(), the only place we use MSG_TRUNC. However, tcp_sock_consume() only has a single caller, which makes it a prime candidate for inlining. If inlined, it won't appear on the stack and valgrind won't match the correct suppression. It appears that certain compiler versions (for example gcc-13.2.1 in Fedora 39) will inline this function even with the -O0 we use for valgrind builds. This breaks the suppression leading to a spurious failure in the tests. There's not really any way to adjust the suppression itself without making it overly broad (we don't want to match other recv() calls). So, as a hack explicitly prevent inlining of this function when we're making a valgrind build. To accomplish this add an explicit -DVALGRIND when making such a build. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Simplify away tcp_port_rebind()David Gibson2023-11-191-29/+12
| | | | | | | | | | | | | | | | | tcp_port_rebind() is desgined to be called from NS_CALL() and has two disjoint cases: one where it enters the namespace (outbound forwards) and one where it doesn't (inbound forwards). We only actually need the NS_CALL() framing for the outbound case, for inbound we can just call tcp_port_do_rebind() directly. So simplify tcp_port_rebind() to tcp_port_rebind_outbound(), allowing us to eliminate an awkward parameters structure. With that done we can safely rename tcp_port_do_rebind() to tcp_port_rebind() for brevity. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Use common helper for rebinding inbound and outbound portsDavid Gibson2023-11-191-47/+45
| | | | | | | | | tcp_port_rebind() has two cases with almost but not quite identical code. Simplify things a bit by factoring this out into a single parameterised helper, tcp_port_do_rebind(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Don't use TCP_WINDOW_CLAMPDavid Gibson2023-11-101-56/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the L2 tap side, we see TCP headers and know the TCP window that the ultimate receiver is advertising. In order to avoid unnecessary buffering within passt/pasta (or by the kernel on passt/pasta's behalf) we attempt to advertise that window back to the original sock-side sender using TCP_WINDOW_CLAMP. However, TCP_WINDOW_CLAMP just doesn't work like this. Prior to kernel commit 3aa7857fe1d7 ("tcp: enable mid stream window clamp"), it simply had no effect on established sockets. After that commit, it does affect established sockets but doesn't behave the way we need: * It appears to be designed only to shrink the window, not to allow it to re-expand. * More importantly, that commit has a serious bug where if the setsockopt() is made when the existing kernel advertised window for the socket happens to be zero, it will now become locked at zero, stopping any further data from being received on the socket. Since this has never worked as intended, simply remove it. It might be possible to re-implement the intended behaviour by manipulating SO_RCVBUF, so we leave a comment to that effect. This kernel bug is the underlying cause of both the linked passt bug and the linked podman bug. We attempted to fix this before with passt commit d3192f67 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag"). However while that commit masked the bug for some cases, it didn't really address the problem. Fixes: d3192f67c492 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag") Link: https://github.com/containers/podman/issues/20170 Link: https://bugs.passt.top/show_bug.cgi?id=74 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>