aboutgitcodebugslistschat
path: root/passt.c
Commit message (Collapse)AuthorAgeFilesLines
* epoll: Better handling of number of epoll typesDavid Gibson2024-01-221-1/+3
| | | | | | | | | As we already did for flow types, use an "EPOLL_NUM_TYPES" isntead of EPOLL_TYPE_MAX, which is a little bit safer and clearer. Add a static assert on the size of the matching names array. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Add handling for per-flow timersDavid Gibson2024-01-221-3/+4
| | | | | | | | | | | | | | | | | | | tcp_timer() scans the flow table so that it can run tcp_splice_timer() on each spliced connection. More generally, other flow types might want to run similar timers in future. We could add a flow_timer() analagous to tcp_timer(), udp_timer() etc. However, this would need to scan the flow table, which we would have just done in flow_defer_handler(). We'd prefer to just scan the flow table once, dispatching both per-flow deferred events and per-flow timed events if necessary. So, extend flow_defer_handler() to do this. For now we use the same timer interval for all flow types (1s). We can make that more flexible in future if we need to. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Add flow-centric dispatch for deferred flow handlingDavid Gibson2024-01-221-0/+1
| | | | | | | | | | | | | | | tcp_defer_handler(), amongst other things, scans the flow table and does some processing for each TCP connection. When we add other protocols to the flow table, they're likely to want some similar scanning. It makes more sense for cache friendliness to perform a single scan of the flow table and dispatch to the protocol specific handlers, rather than having each protocol separately scan the table. To that end, add a new flow_defer_handler() handling all flow-linked deferred operations. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: "TCP" hash secret doesn't need to be TCP specificDavid Gibson2023-12-041-0/+40
| | | | | | | | | | | | | The TCP state structure includes a 128-bit hash_secret which we use for SipHash calculations to mitigate attacks on the TCP hash table and initial sequence number. We have plans to use SipHash in places that aren't TCP related, and there's no particular reason they'd need their own secret. So move the hash_secret to the general context structure. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, udp: Don't pre-fill IPv4 destination address in headersDavid Gibson2023-08-221-6/+4
| | | | | | | | | | | | | | | | | Because packets sent on the tap interface will always be going to the guest/namespace, we more-or-less know what address they'll be going to. So we pre-fill this destination address in our header buffers for IPv4. We can't do the same for IPv6 because we could need either the global or link-local address for the guest. In future we're going to want more flexibility for the destination address, so this pre-filling will get in the way. Change the flow so we always fill in the IPv4 destination address for each packet, rather than prefilling it from proto_update_l2_buf(). In fact for TCP we already redundantly filled the destination for each packet anyway. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Use different epoll types for passt and pasta tap fdsDavid Gibson2023-08-131-3/+7
| | | | | | | | | | | Currently we have a single epoll event type for the "tap" fd, which could be either a handle on a /dev/net/tun device (pasta) or a connected Unix socket (passt). However for the two modes we call different handler functions. Simplify this a little by using different epoll types and dispatching directly to the correct handler function. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Split listening Unix domain socket into its own typeDavid Gibson2023-08-131-1/+5
| | | | | | | | | | | | | tap_handler() actually handles events on three different types of object: the /dev/tap character device (pasta), a connected Unix domain socket (passt) or a listening Unix domain socket (passt). The last, in particular, really has no handling in common with the others, so split it into its own epoll type and directly dispatch to the relevant handler from the top level. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Split handling of listening TCP sockets into their own handlerDavid Gibson2023-08-131-2/+6
| | | | | | | | | | | | | | | | | tcp_sock_handler() handles both listening TCP sockets, and connected TCP sockets, but what it needs to do in those cases has essentially nothing in common. Therefore, give listening sockets their own epoll_type value and dispatch directly to their own handler from the top level. Furthermore, the two handlers need essentially entirely different information from the reference: we re-(ab)used the index field in the tcp_epoll_ref to indicate the port for the listening socket, but that's not the same meaning. So, switch listening sockets to their own reference type which we can lay out as we please. That lets us remove the listen and outbound fields from the normal (connected) tcp_epoll_ref, reducing it to just the connection table index. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Split handling of TCP timerfds into its own handler functionDavid Gibson2023-08-131-0/+4
| | | | | | | | | | | | tcp_sock_handler() actually handles several different types of fd events. This includes timerfds that aren't sockets at all. The handling of these has essentially nothing in common with the other cases. So, give the TCP timers there own epoll_type value and dispatch directly to their handler. This also means we can remove the timer field from tcp_epoll_ref, the information it encoded is now implicit in the epoll_type value. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Tiny cleanup to udp_sock_handler()David Gibson2023-08-131-2/+1
| | | | | | | | | Move the test for c->no_udp into the function itself, rather than in the dispatching switch statement to better localize the UDP specific logic, and make for greated consistency with other handler functions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Split handling of ICMP and ICMPv6 socketsDavid Gibson2023-08-131-2/+3
| | | | | | | | | | | | | | | | We have different epoll type values for ICMP and ICMPv6 sockets, but they both call the same handler function, icmp_sock_handler(). However that function does essentially nothing in common for the two cases. So, split it into icmp_sock_handler() and icmpv6_sock_handler() and dispatch them separately from the top level. While we're there remove some parameters that the function was never using anyway. Also move the test for c->no_icmp into the functions, so that all the logic specific to ICMP is within the handler, rather than in the top level dispatch code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Fold sock_handler into general switch on epoll event fdDavid Gibson2023-08-131-27/+27
| | | | | | | | | | | | When we process events from epoll_wait(), we check for a number of special cases before calling sock_handler() which then dispatches based on the protocol type of the socket in the event. Fold these cases together into a single switch on the fd type recorded in the epoll data field. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Always use epoll_ref for the epoll data variableDavid Gibson2023-08-131-5/+6
| | | | | | | | | | | | | | | | | | | | | | epoll_ref contains a variety of information useful when handling epoll events on our sockets, and we place it in the epoll_event data field returned by epoll. However, for a few other things we use the 'fd' field in the standard union of types for that data field. This actually introduces a bug which is vanishingly unlikely to hit in practice, but very nasty if it ever did: theoretically if we had a very large file descriptor number for fd_tap or fd_tap_listen it could overflow into bits that overlap with the 'proto' field in epoll_ref. With some very bad luck this could mean that we mistakenly think an event on a regular socket is an event on fd_tap or fd_tap_listen. More practically, using different (but overlapping) fields of the epoll_data means we can't unify dispatch for the various different objects in the epoll. Therefore use the same epoll_ref as the data for the tap fds and the netns quit fd, adding new fd type values to describe them. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Generalize epoll_ref to cover things other than socketsDavid Gibson2023-08-131-13/+12
| | | | | | | | | | | | | | The epoll_ref type includes fields for the IP protocol of a socket, and the socket fd. However, we already have a few things in the epoll which aren't protocol sockets, and we may have more in future. Rename these fields to an abstract "fd type" and file descriptor for more generality. Similarly, rather than using existing IP protocol numbers for the type, introduce our own number space. For now these just correspond to the supported protocols, but we'll expand on that in future. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Use C11 anonymous members to make poll refs less verbose to useDavid Gibson2023-08-041-4/+4
| | | | | | | | | | | | union epoll_ref has a deeply nested set of structs and unions to let us subdivide it into the various different fields we want. This means that referencing elements can involve an awkward long string of intermediate fields. Using C11 anonymous structs and unions lets us do this less clumsily. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Fix error check for signal(), improve error messagesStefano Brivio2023-04-131-2/+9
| | | | | | | | | | | | | | Valtteri reports that if SIGPIPE already has a disposition set by the parent process, such as systemd with the default setting of IgnoreSIGPIPE=yes, signal() will return the previous value, not zero, and this is not an error: check for SIG_ERR instead. While at it, split messages for failures of sigaction() and signal(), and report the actual error. Reported-by: Valtteri Vuorikoski <vuori@notcom.org> Fixes: 8534be076c73 ("Catch failures when installing signal handlers") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Relicense to GPL 2.0, or any later versionStefano Brivio2023-04-061-1/+1
| | | | | | | | | | | | | | | | | | | In practical terms, passt doesn't benefit from the additional protection offered by the AGPL over the GPL, because it's not suitable to be executed over a computer network. Further, restricting the distribution under the version 3 of the GPL wouldn't provide any practical advantage either, as long as the passt codebase is concerned, and might cause unnecessary compatibility dilemmas. Change licensing terms to the GNU General Public License Version 2, or any later version, with written permission from all current and past contributors, namely: myself, David Gibson, Laine Stump, Andrea Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Fix header includes to build with muslChris Kuhn2023-03-091-0/+2
| | | | | | | | | | | | | | | Roughly inspired from a patch by Chris Kuhn: fix up includes so that we can build against musl: glibc is more lenient as headers generally include a larger amount of other headers. Compared to the original patch, I only included what was needed directly in C files, instead of adding blanket includes in local header files. It's a bit more involved, but more consistent with the current (not ideal) situation. Reported-by: Chris Kuhn <kuhnchris+github@kuhnchris.eu> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf, passt: Rename stderr to force_stderrChris Kuhn2023-03-091-1/+1
| | | | | | | | | | | | While building against musl, gcc informs us that 'stderr' is a protected keyword. This probably comes from a #define stderr (stderr) in musl's stdio.h, to avoid a clash with extern FILE *const stderr, but I didn't really track it down. Just rename it to force_stderr, it makes more sense. [sbrivio: Added commit message] Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* convert all remaining err() followed by exit() to die()Laine Stump2023-02-161-8/+4
| | | | | | | | This actually leaves us with 0 uses of err(), but someone could want to use it in the future, so we may as well leave it around. Signed-off-by: Laine Stump <laine@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* log to stderr until process is daemonized, even if a log file is setLaine Stump2023-02-161-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Once a log file (specified on the commandline) is opened, the logging functions will stop sending error logs to stderr, which is annoying if passt has been started by another process that wants to collect error messages from stderr so it can report why passt failed to start. It would be much nicer if passt continued sending all log messages to stderr until it daemonizes itself (at which point the process that started passt can assume that it was started successfully). The system log mask is set to LOG_EMERG when the process starts, and we're already using that to do "special" logging during the period from process start until the log level requested on the commandline is processed (setting the log mask to something else). This period *almost* matches with "the time before the process is daemonized"; if we just delay setting the log mask a tiny bit, then it will match exactly, and we can use it to determine if we need to send log messages to stderr even when a log file has been specified and opened. This patch delays the setting of the log mask until immediately before the call to __daemon(). It also modifies logfn() slightly, so that it will log to stderr any time log mask is LOG_EMERG, even if a log file has been opened. Signed-off-by: Laine Stump <laine@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* pasta: Wait for tap to be set up before spawning commandStefano Brivio2023-02-121-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adapted from a patch by Paul Holzinger: when pasta spawns a command, operating without a pre-existing user and network namespace, it needs to wait for the tap device to be configured and its handler ready, before the command is actually executed. Otherwise, something like: pasta --config-net nslookup passt.top usually fails as the nslookup command is issued before the network interface is ready. We can't adopt a simpler approach based on SIGSTOP and SIGCONT here: the child runs in a separate PID namespace, so it can't send SIGSTOP to itself as the kernel sees the child as init process and blocks the delivery of the signal. We could send SIGSTOP from the parent, but this wouldn't avoid the possible condition where the child isn't ready to wait for it when the parent sends it, also raised by Paul -- and SIGSTOP can't be blocked, so it can never be pending. Use SIGUSR1 instead: mask it before clone(), so that the child starts with it blocked, and can safely wait for it. Once the parent is ready, it sends SIGUSR1 to the child. If SIGUSR1 is sent before the child is waiting for it, the kernel will queue it for us, because it's blocked. Reported-by: Paul Holzinger <pholzing@redhat.com> Fixes: 1392bc5ca002 ("Allow pasta to take a command to execute") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt, tap: Add --fd optionRichard W.M. Jones2022-11-251-1/+0
| | | | | | | | | This passes a fully connected stream socket to passt. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> [sbrivio: reuse fd_tap instead of adding a new descriptor, imply --one-off on --fd, add to optstring and usage()] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Move __setlogmask() calls before output unrelated to configurationStefano Brivio2022-11-101-8/+8
| | | | | | | | | | | ...so that we avoid printing some lines twice because log-level is still set to LOG_EMERG, as if logging configuration didn't happen yet. While at it, note that logging to stderr doesn't really depend on whether debug mode is enabled or not. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Use typing to reduce chances of IPv4 endianness errorsDavid Gibson2022-11-041-1/+1
| | | | | | | | | | | | | | | | | | | We recently corrected some errors handling the endianness of IPv4 addresses. These are very easy errors to make since although we mostly store them in network endianness, we sometimes need to manipulate them in host endianness. To reduce the chances of making such mistakes again, change to always using a (struct in_addr) instead of a bare in_addr_t or uint32_t to store network endian addresses. This makes it harder to accidentally do arithmetic or comparisons on such addresses as if they were host endian. We introduce a number of IN4_IS_ADDR_*() helpers to make it easier to directly work with struct in_addr values. This has the additional benefit of making the IPv4 and IPv6 paths more visually similar. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Don't discard first reply sequence for a given echo ID2022_10_26.f212044Stefano Brivio2022-10-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | In pasta mode, ICMP and ICMPv6 echo sockets relay back to us any reply we send: we're on the same host as the target, after all. We discard them by comparing the last sequence we sent with the sequence we receive. However, on the first reply for a given identifier, the sequence might be zero, depending on the implementation of ping(8): we need another value to indicate we haven't sent any sequence number, yet. Use -1 as initialiser in the echo identifier map. This is visible with Busybox's ping, and was reported by Paul on the integration at https://github.com/containers/podman/pull/16141, with: $ podman run --net=pasta alpine ping -c 2 192.168.188.1 ...where only the second reply would be routed back. Reported-by: Paul Holzinger <pholzing@redhat.com> Fixes: 33482d5bf293 ("passt: Add PASTA mode, major rework") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* isolation: Clarify various self-isolation stepsDavid Gibson2022-10-151-5/+3
| | | | | | | | | | We have a number of steps of self-isolation scattered across our code. Improve function names and add comments to make it clearer what the self isolation model is, what the steps do, and why they happen at the points they happen. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* log, conf: Add support for logging to fileStefano Brivio2022-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | In some environments, such as KubeVirt pods, we might not have a system logger available. We could choose to run in foreground, but this takes away the convenient synchronisation mechanism derived from forking to background when interfaces are ready. Add optional logging to file with -l/--log-file and --log-size. Unfortunately, this means we need to duplicate features that are more appropriately implemented by a system logger, such as rotation. Keep that reasonably simple, by using fallocate() with range collapsing where supported (Linux kernel >= 3.15, extent-based ext4 and XFS) and falling back to an unsophisticated block-by-block moving of entries toward the beginning of the file once we reach the (mandatory) size limit. While at it, clarify the role of LOG_EMERG in passt.c. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* Move logging functions to a new file, log.cStefano Brivio2022-10-141-0/+1
| | | | | | | | Logging to file is going to add some further complexity that we don't want to squeeze into util.c. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* cppcheck: Suppress same-value-in-ternary branches warningDavid Gibson2022-09-291-0/+1
| | | | | | | | | | | | | | TIMER_INTERVAL is the minimum of two separately defined intervals which happen to have the same value at present. This results in an expression which has the same value in both branches of a ternary operator, which cppcheck warngs about. This is logically sound in this case, so suppress the error (we appear to already have a similar suppression for clang-tidy). Also add an unmatchedSuppression suppression, since only some cppcheck versions complain about this instance. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Catch failures when installing signal handlersDavid Gibson2022-09-291-2/+4
| | | | | | | | | Stop ignoring the return codes from sigaction() and signal(). Unlikely to happen in practice, but if it ever did it could lead to really hard to debug problems. So, take clang-tidy's advice and check for errors here. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Handle userns isolation and dropping root at the same timeDavid Gibson2022-09-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | passt/pasta can interact with user namespaces in a number of ways: 1) With --netns-only we'll remain in our original user namespace 2) With --userns or a PID option to pasta we'll join either the given user namespace or that of the PID 3) When pasta spawns a shell or command we'll start a new user namespace for the command and then join it 4) With passt we'll create a new user namespace when we sandbox() ourself However (3) and (4) turn out to have essentially the same effect. In both cases we create one new user namespace. The spawned command starts there, and passt/pasta itself will live there from sandbox() onwards. Because of this, we can simplify user namespace handling by moving the userns handling earlier, to the same point we drop root in the original namespace. Extend the drop_user() function to isolate_user() which does both. After switching UID and GID in the original userns, isolate_user() will either join or create the userns we require. When we spawn a command with pasta_start_ns()/pasta_setup_ns() we no longer need to create a userns, because we're already made one. sandbox() likewise no longer needs to create (or join) an userns because we're already in the one we need. We no longer need c->pasta_userns_fd, since the fd is only used locally in isolate_user(). Likewise we can replace c->netns_only with a local in conf(), since it's not used outside there. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Move self-isolation code into a separate fileDavid Gibson2022-09-131-112/+1
| | | | | | | | passt/pasta contains a number of routines designed to isolate passt from the rest of the system for security. These are spread through util.c and passt.c. Move them together into a new isolation.c file. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Don't unnecessarily avoid CLOEXEC flags2022_08_24.60ffc5bDavid Gibson2022-08-241-4/+2
| | | | | | | | | | | | | | | | There are several places in the passt code where we have lint overrides because we're not adding CLOEXEC flags to open or other operations. Comments suggest this is because it's before we fork() into the background but we'll need those file descriptors after we're in the background. However, as the name suggests CLOEXEC closes on exec(), not on fork(). The only place we exec() is either super early invoke the avx2 version of the binary, or when we start a shell in pasta mode, which certainly *doesn't* require the fds in question. Add the CLOEXEC flag in those places, and remove the lint overrides. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Make substructures for IPv4 and IPv6 specific context informationDavid Gibson2022-07-301-1/+1
| | | | | | | | | | | | The context structure contains a batch of fields specific to IPv4 and to IPv6 connectivity. Split those out into a sub-structure. This allows the conf_ip4() and conf_ip6() functions, which take the entire context but touch very little of it, to be given more specific parameters, making it clearer what it affects without stepping through the code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Separate IPv4 and IPv6 configurationDavid Gibson2022-07-301-2/+2
| | | | | | | | | | | | | | | | | | | After recent changes, conf_ip() now has essentially entirely disjoint paths for IPv4 and IPv6 configuration. So, it's cleaner to split them out into different functions conf_ip4() and conf_ip6(). Splitting these out also lets us make the interface a bit nicer, having them return success or failure directly, rather than manipulating c->v4 and c->v6 to indicate success/failure of the two versions. Since these functions may also initialize the interface index for each protocol, it turns out we can then drop c->v4 and c->v6 entirely, replacing tests on those with tests on whether c->ifi4 or c->ifi6 is non-zero (since a 0 interface index is never valid). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Whitespace fixes] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Truncate PID file on open()Stefano Brivio2022-07-221-1/+1
| | | | | | | Otherwise, if the current PID has fewer digits than a previously written one, the content will be wrong. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Allow exit_group() system call in seccomp profilesStefano Brivio2022-07-141-0/+2
| | | | | | | | | | | | We handle SIGQUIT and SIGTERM calling exit(), which is usually implemented with the exit_group() system call. If we don't allow exit_group(), we'll get a SIGSYS while handling SIGQUIT and SIGTERM, which means a misleading non-zero exit code. Reported-by: Wenli Quan <wquan@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2101990 Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* arch, passt: Use executable link to form AVX2 binary pathStefano Brivio2022-07-141-3/+6
| | | | | | | | | | | | | | | | ...instead of argv[0], which might or might not contain a valid path to the executable itself. Instead of mangling argv[0], use the same link to find out if we're already running the AVX2 build where supported. Alternatively, we could use execvpe(), but that might result in running a different installed version, in case e.g. the set of binaries is present in both /usr/bin and /usr/local/bin, with both being in $PATH. Reported-by: Wenli Quan <wquan@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2101310 Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf: Add --runas option, changing to given UID and GID if started as rootStefano Brivio2022-05-191-46/+0
| | | | | | | | | | | | | | On some systems, user and group "nobody" might not be available. The new --runas option allows to override the default "nobody" choice if started as root. Now that we allow this, drop the initgroups() call that was used to add any additional groups for the given user, as that might now grant unnecessarily broad permissions. For instance, several distributions have a "kvm" group to allow regular user access to /dev/kvm, and we don't need that in passt or pasta. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, tcp, udp: Allow address specification for forwarded portsStefano Brivio2022-05-011-11/+11
| | | | | | | | | | | | | This feature is available in slirp4netns but was missing in passt and pasta. Given that we don't do dynamic memory allocation, we need to bind sockets while parsing port configuration. This means we need to process all other options first, as they might affect addressing and IP version support. It also implies a minor rework of how TCP and UDP implementations bind sockets. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Improper use of negative value (CWE-394)Stefano Brivio2022-04-071-5/+14
| | | | | | Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Ignoring number of bytes read, CWE-252Stefano Brivio2022-04-051-2/+3
| | | | | | Harmless, assuming sane kernel behaviour. Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Accurate error reporting for sandbox()Stefano Brivio2022-03-291-10/+26
| | | | | | | It's actually quite easy to make it fail depending on the environment, accurately report errors here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Fix android-cloexec-* clang-tidy warnings, re-enable checksStefano Brivio2022-03-291-4/+5
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Mark constant references as constStefano Brivio2022-03-291-7/+7
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp_splice: Close sockets right away on high number of open filesStefano Brivio2022-03-291-1/+1
| | | | | | | | | | | | | We can't take for granted that the hard limit for open files is big enough as to allow to delay closing sockets to a timer. Store the value of RTLIMIT_NOFILE we set at start, and use it to understand if we're approaching the limit with pending, spliced TCP connections. If that's the case, close sockets right away as soon as they're not needed, instead of deferring this task to a timer. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Rework timers to use timerfd instead of periodic bitmap scanStefano Brivio2022-03-291-4/+8
| | | | | | | | | | | | | | | | | | With a lot of concurrent connections, the bitmap scan approach is not really sustainable. Switch to per-connection timerfd timers, set based on events and on two new flags, ACK_FROM_TAP_DUE and ACK_TO_TAP_DUE. Timers are added to the common epoll list, and implement the existing timeouts. While at it, drop the CONN_ prefix from flag names, otherwise they get quite long, and fix the logic to decide if a connection has a local, possibly unreachable endpoint: we shouldn't go through the rest of tcp_conn_from_tap() if we reset the connection due to a successful bind(2), and we'll get EACCES if the port number is low. Suggested by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Refactor to use events instead of states, split out spliced implementationStefano Brivio2022-03-281-2/+2
| | | | | | | | | | | | | | | | | | | | | Using events and flags instead of states makes the implementation much more straightforward: actions are mostly centered on events that occurred on the connection rather than states. An example is given by the ESTABLISHED_SOCK_FIN_SENT and FIN_WAIT_1_SOCK_FIN abominations: we don't actually care about which side started closing the connection to handle closing of connection halves. Split out the spliced implementation, as it has very little in common with the "regular" TCP path. Refactor things here and there to improve clarity. Add helpers to trace where resets and flag settings come from. No functional changes intended. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, util, tap: Implement --trace option for extra verbose loggingStefano Brivio2022-03-251-1/+2
| | | | | | | | --debug can be a bit too noisy, especially as single packets or socket messages are logged: implement a new option, --trace, implying --debug, that enables all debug messages. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 08:27:02 +0000