aboutgitcodebugslistschat
path: root/icmp.c
Commit message (Collapse)AuthorAgeFilesLines
* icmp: Don't attempt to match host IDs to guest IDsDavid Gibson2024-01-221-12/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When forwarding pings from tap, currently we create a ping socket with a socket address whose port is set to the ID of the ping received from the guest. This causes the socket to send pings with the same ID on the host. Although this seems look a good idea for maximum transparency, it's probably unwise. First, it's fallible - the bind() could fail, and we already have fallback logic which will overwrite the packets with the expected guest id if the id we get on replies doesn't already match. We might as well do that unconditionally. But more importantly, we don't know what else on the host might be using ping sockets, so we could end up with an ID that's the same as an existing socket. You'd expect that to fail the bind() with EADDRINUSE, which would be fine: we'd fall back to rewriting the reply ids. However it appears the kernel (v6.6.3 at least), does *not* fail the bind() and instead it's "last socket wins" in terms of who gets the replies. So we could accidentally intercept ping replies for something else on the host. So, instead of using bind() to set the id, just let the kernel pick one and expect to translate the replies back. Although theoretically this makes the passt/pasta link a bit less "transparent", essentially nothing cares about specific ping IDs, much like TCP source ports, which we also don't preserve. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Don't attempt to handle "wrong direction" ping socket trafficDavid Gibson2024-01-221-10/+6
| | | | | | | | | | | | | | | | | | | | | | Linux ICMP "ping" sockets are very specific in what they do. They let userspace send ping requests (ICMP_ECHO or ICMP6_ECHO_REQUEST), and receive matching replies (ICMP_ECHOREPLY or ICMP6_ECHO_REPLY). They don't let you intercept or handle incoming ping requests. In the case of passt/pasta that means we can process echo requests from tap and forward them to a ping socket, then take the replies from the ping socket and forward them to tap. We can't do the reverse: take echo requests from the host and somehow forward them to the guest. There's really no way for something outside to initiate a ping to a passt/pasta connected guest and if there was we'd need an entirely different mechanism to handle it. However, we have some logic to deal with packets going in that reverse direction. Remove it, since it can't ever be used that way. While we're there use defines for the ICMPv6 types, instead of open coded type values. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Remove redundant initialisation of sendto() addressDavid Gibson2024-01-221-2/+0
| | | | | | | | | We initialise the address portion of the sockaddr for sendto() to the unspecified address, but then always overwrite it with the actual destination address before we call the sendto(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Don't set "port" on destination sockaddr for ping socketsDavid Gibson2024-01-221-6/+2
| | | | | | | | | | | | | | | We set the port to the ICMP id on the sendto() address when using ICMP ping sockets. However, this has no effect: the ICMP id the kernel uses is determined only by the "port" on the socket's *bound* address (which is constructed inside sock_l4(), using the id we also pass to it). For unclear reasons this change triggers cppcheck 2.13.0 to give new "variable could be const pointer" warnings, so make *ih const as well to fix that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Standardise on 'now' for current timestamp variablesDavid Gibson2024-01-221-6/+6
| | | | | | | | | In a number of places we pass around a struct timespec representing the (more or less) current time. Sometimes we call it 'now', and sometimes we call it 'ts'. Standardise on the more informative 'now'. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Make sock_l4() treat empty string ifname like NULLDavid Gibson2023-12-271-11/+4
| | | | | | | | | | | sock_l4() takes NULL for ifname if you don't want to bind the socket to a particular interface. However, for a number of the callers, it's more natural to use an empty string for that case. Change sock_l4() to accept either NULL or an empty string equivalently, and simplify some callers using that change. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Avoid unnecessary handling of unspecified bind addressDavid Gibson2023-12-271-12/+4
| | | | | | | | | | We go to some trouble, if the configured output address is unspecified, to pass NULL to sock_l4(). But while passing NULL is one way to get sock_l4() not to specify a bind address, passing the "any" address explicitly works too. Use this to simplify icmp_tap_handler(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Add IN4ADDR_ANY_INIT macroDavid Gibson2023-12-271-1/+1
| | | | | | | | | | We already define IN4ADDR_LOOPBACK_INIT to initialise a struct in_addr to the loopback address, make a similar one for the unspecified / any address. This avoids messying things with the internal structure of struct in_addr where we don't care about it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* pif: Pass originating pif to tap handler functionsDavid Gibson2023-11-071-1/+3
| | | | | | | | | | | For now, packets passed to the various *_tap_handler() functions always come from the single "tap" interface. We want to allow the possibility to broaden that in future. As preparation for that, have the code in tap.c pass the pif id of the originating interface to each of those handler functions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Consolidate and improve workarounds for clang-tidy issue 58992David Gibson2023-09-271-5/+0
| | | | | | | | | | | | | | | | | | | | | We have several workarounds for a clang-tidy bug where the checker doesn't recognize that a number of system calls write to - and therefore initialise - a socket address. We can't neatly use a suppression, because the bogus warning shows up some time after the actual system call, when we access a field of the socket address which clang-tidy erroneously thinks is uninitialised. Consolidate these workarounds into one place by using macros to implement wrappers around affected system calls which add a memset() of the sockaddr to silence clang-tidy. This removes the need for the individual memset() workarounds at the callers - and the somewhat longwinded explanatory comments. We can then use a #define to not include the hack in "real" builds, but only consider it for clang-tidy. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: Pass source address to protocol handler functionsDavid Gibson2023-08-221-4/+8
| | | | | | | | | | | The tap code passes the IPv4 or IPv6 destination address of packets it receives to the protocol specific code. Currently that protocol code doesn't use the source address, but we want it to in future. So, in preparation, pass the IPv4/IPv6 source address of tap packets to those functions as well. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Split handling of ICMP and ICMPv6 socketsDavid Gibson2023-08-131-48/+64
| | | | | | | | | | | | | | | | We have different epoll type values for ICMP and ICMPv6 sockets, but they both call the same handler function, icmp_sock_handler(). However that function does essentially nothing in common for the two cases. So, split it into icmp_sock_handler() and icmpv6_sock_handler() and dispatch them separately from the top level. While we're there remove some parameters that the function was never using anyway. Also move the test for c->no_icmp into the functions, so that all the logic specific to ICMP is within the handler, rather than in the top level dispatch code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* epoll: Generalize epoll_ref to cover things other than socketsDavid Gibson2023-08-131-3/+3
| | | | | | | | | | | | | | The epoll_ref type includes fields for the IP protocol of a socket, and the socket fd. However, we already have a few things in the epoll which aren't protocol sockets, and we may have more in future. Rename these fields to an abstract "fd type" and file descriptor for more generality. Similarly, rather than using existing IP protocol numbers for the type, introduce our own number space. For now these just correspond to the supported protocols, but we'll expand on that in future. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Use C11 anonymous members to make poll refs less verbose to useDavid Gibson2023-08-041-11/+11
| | | | | | | | | | | | union epoll_ref has a deeply nested set of structs and unions to let us subdivide it into the various different fields we want. This means that referencing elements can involve an awkward long string of intermediate fields. Using C11 anonymous structs and unions lets us do this less clumsily. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Relicense to GPL 2.0, or any later versionStefano Brivio2023-04-061-1/+1
| | | | | | | | | | | | | | | | | | | In practical terms, passt doesn't benefit from the additional protection offered by the AGPL over the GPL, because it's not suitable to be executed over a computer network. Further, restricting the distribution under the version 3 of the GPL wouldn't provide any practical advantage either, as long as the passt codebase is concerned, and might cause unnecessary compatibility dilemmas. Change licensing terms to the GNU General Public License Version 2, or any later version, with written permission from all current and past contributors, namely: myself, David Gibson, Laine Stump, Andrea Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, icmp, tcp, udp: Add options to bind to outbound address and interfaceStefano Brivio2023-03-091-4/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* Use typing to reduce chances of IPv4 endianness errorsDavid Gibson2022-11-041-2/+1
| | | | | | | | | | | | | | | | | | | We recently corrected some errors handling the endianness of IPv4 addresses. These are very easy errors to make since although we mostly store them in network endianness, we sometimes need to manipulate them in host endianness. To reduce the chances of making such mistakes again, change to always using a (struct in_addr) instead of a bare in_addr_t or uint32_t to store network endian addresses. This makes it harder to accidentally do arithmetic or comparisons on such addresses as if they were host endian. We introduce a number of IN4_IS_ADDR_*() helpers to make it easier to directly work with struct in_addr values. This has the additional benefit of making the IPv4 and IPv6 paths more visually similar. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Correct some missing endian conversions of IPv4 addressesDavid Gibson2022-11-041-1/+1
| | | | | | | | | | | | | | | | The INADDR_LOOPBACK constant is in host endianness, and similarly the IN_MULTICAST macro expects a host endian address. However, there are some places in passt where we use those with network endian values. This means that passt will incorrectly allow you to set 127.0.0.1 or a multicast address as the guest address or DNS forwarding address. Add the necessary conversions to correct this. INADDR_ANY and INADDR_BROADCAST logically behave the same way, although because they're palindromes it doesn't have an effect in practice. Change them to be logically correct while we're there, though. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Don't discard first reply sequence for a given echo ID2022_10_26.f212044Stefano Brivio2022-10-271-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | In pasta mode, ICMP and ICMPv6 echo sockets relay back to us any reply we send: we're on the same host as the target, after all. We discard them by comparing the last sequence we sent with the sequence we receive. However, on the first reply for a given identifier, the sequence might be zero, depending on the implementation of ping(8): we need another value to indicate we haven't sent any sequence number, yet. Use -1 as initialiser in the echo identifier map. This is visible with Busybox's ping, and was reported by Paul on the integration at https://github.com/containers/podman/pull/16141, with: $ podman run --net=pasta alpine ping -c 2 192.168.188.1 ...where only the second reply would be routed back. Reported-by: Paul Holzinger <pholzing@redhat.com> Fixes: 33482d5bf293 ("passt: Add PASTA mode, major rework") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* icmp: Add debugging messages for handled replies and requestsStefano Brivio2022-10-271-5/+25
| | | | | | | ...instead of just reporting errors. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* tap: Split tap_ip4_send() into UDP and ICMP variantsDavid Gibson2022-10-191-1/+2
| | | | | | | | | | | | | | | | | | tap_ip4_send() has special case logic to compute the checksums for UDP and ICMP packets, which is a mild layering violation. By using a suitable helper we can split it into tap_udp4_send() and tap_icmp4_send() functions without greatly increasing the code size, this removing that layering violation. We make some small changes to the interface while there. In both cases we make the destination IPv4 address a parameter, which will be useful later. For the UDP variant we make it take just the UDP payload, and it will generate the UDP header. For the ICMP variant we pass in the ICMP header as before. The inconsistency is because that's what seems to be the more natural way to invoke the function in the callers in each case. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: Split tap_ip6_send() into UDP and ICMP variantsDavid Gibson2022-10-191-1/+2
| | | | | | | | | | | | | | | | | | tap_ip6_send() has special case logic to compute the checksums for UDP and ICMP packets, which is a mild layering violation. By using a suitable helper we can split it into tap_udp6_send() and tap_icmp6_send() functions without greatly increasing the code size, this removing that layering violation. We make some small changes to the interface while there. In both cases we make the destination IPv6 address a parameter, which will be useful later. For the UDP variant we make it take just the UDP payload, and it will generate the UDP header. For the ICMP variant we pass in the ICMP header as before. The inconsistency is because that's what seems to be the more natural way to invoke the function in the callers in each case. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Split tap_ip_send() into IPv4 and IPv6 specific functionsDavid Gibson2022-10-191-8/+2
| | | | | | | | | | | | | | | | | | | The IPv4 and IPv6 paths in tap_ip_send() have very little in common, and it turns out that every caller (statically) knows if it is using IPv4 or IPv6. So split into separate tap_ip4_send() and tap_ip6_send() functions. Use a new tap_l2_hdr() function for the very small common part. While we're there, make some minor cleanups: - We were double writing some fields in the IPv6 header, so that it temporary matched the pseudo-header for checksum calculation. With recent checksum reworks, this isn't neccessary any more. - We don't use any IPv4 header options, so use some sizeof() constructs instead of some open coded values for header length. - The comment used to say that the flow label was for TCP over IPv6, but in fact the only thing we used it for was DHCPv6 over UDP traffic Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Set sin6_scope_id for outbound ICMPv6 echo requestsStefano Brivio2022-10-151-0/+1
| | | | | | | | | | | If we ping a link-local address, we need to pass this to sendto(), as it will obviously fail with -EINVAL otherwise. If we ping other addresses, it's probably a good idea anyway to specify the configured outbound interface here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf, tcp, udp: Allow specification of interface to bind toStefano Brivio2022-10-151-2/+2
| | | | | | | | | | | | | | | | Since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can bind sockets to interfaces, if they haven't been bound yet (as in bind()). Introduce an optional interface specification for forwarded ports, prefixed by %, that can be passed together with an address. Reported use case: running local services that use ports we want to have externally forwarded: https://github.com/containers/podman/issues/14425 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* Move logging functions to a new file, log.cStefano Brivio2022-10-141-0/+1
| | | | | | | | Logging to file is going to add some further complexity that we don't want to squeeze into util.c. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* clang-tidy: Remove duplicate #include from icmp.cDavid Gibson2022-09-291-1/+0
| | | | | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Correct off by one errors dealing with number of echo request ids2022_09_24.8978f65David Gibson2022-09-241-2/+3
| | | | | | | | | | ICMP echo request and reply packets include a 16-bit 'id' value. We have some arrays indexed by this id value. Unfortunately we size those arrays with USHRT_MAX (65535) when they need to be sized by the total number of id values (65536). This could lead to buffer overruns. Resize the arrays correctly, using a new define for the purpose. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* conf, tcp, udp: Allow address specification for forwarded portsStefano Brivio2022-05-011-2/+3
| | | | | | | | | | | | | This feature is available in slirp4netns but was missing in passt and pasta. Given that we don't do dynamic memory allocation, we need to bind sockets while parsing port configuration. This means we need to process all other options first, as they might affect addressing and IP version support. It also implies a minor rework of how TCP and UDP implementations bind sockets. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Unchecked return value from library, CWE-252Stefano Brivio2022-04-071-4/+9
| | | | | | | All instances were harmless, but it might be useful to have some debug messages here and there. Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap, tcp, udp, icmp: Cut down on some oversized buffersStefano Brivio2022-03-291-2/+10
| | | | | | | | | The existing sizes provide no measurable differences in throughput and packet rates at this point. They were probably needed as batched implementations were not complete, but they can be decreased quite a bit now. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Mark constant references as constStefano Brivio2022-03-291-7/+8
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Packet abstraction with mandatory boundary checksStefano Brivio2022-03-291-14/+14
| | | | | | | | | | | | | | | | | | | | Implement a packet abstraction providing boundary and size checks based on packet descriptors: packets stored in a buffer can be queued into a pool (without storage of its own), and data can be retrieved referring to an index in the pool, specifying offset and length. Checks ensure data is not read outside the boundaries of buffer and descriptors, and that packets added to a pool are within the buffer range with valid offset and indices. This implies a wider rework: usage of the "queueing" part of the abstraction mostly affects tap_handler_{passt,pasta}() functions and their callees, while the "fetching" part affects all the guest or tap facing implementations: TCP, UDP, ICMP, ARP, NDP, DHCP and DHCPv6 handlers. Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Drop <linux/ipv6.h> include, carry own ipv6hdr and opt_hdr definitionsStefano Brivio2022-01-261-1/+0
| | | | | | | This is the only remaining Linux-specific include -- drop it to avoid clang-tidy warnings and to make code more portable. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Fix build with gcc 7, use std=c99, enable some more Clang checkersStefano Brivio2021-10-211-20/+22
| | | | | | | | | | | | | | Unions and structs, you all have names now. Take the chance to enable bugprone-reserved-identifier, cert-dcl37-c, and cert-dcl51-cpp checkers in clang-tidy. Provide a ffsl() weak declaration using gcc built-in. Start reordering includes, but that's not enough for the llvm-include-order checker yet. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Add clang-tidy Makefile target and test, take care of warningsStefano Brivio2021-10-201-2/+2
| | | | | | | Most are just about style and form, but a few were actually serious mistakes (NDP-related). Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: Completely de-serialise input message batchesStefano Brivio2021-09-271-7/+13
| | | | | | | | | | | | | Until now, messages would be passed to protocol handlers in a single batch only if they happened to be dequeued in a row. Packets interleaved between different connections would result in multiple calls to the same protocol handler for a single connection. Instead, keep track of incoming packet descriptors, arrange them in sequences, and call protocol handlers only as we completely sorted input messages in batches. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Work around possible failure on bind() due to e.g. broken SELinux policyStefano Brivio2021-07-261-4/+14
| | | | | | | | | | | | | | | If we can't bind() ping sockets, the echo identifier sent out from the socket won't be the original one seen from the tap. Binding a ping socket doesn't require any security capability, but it might still fail due to a broken SELinux policy, see for example: https://bugzilla.redhat.com/show_bug.cgi?id=1848929 Track the ICMP echo identifier as part of the epoll reference for the socket and replace it in the reply on mismatch. We won't send out the original identifier as sent from the guest, but still better than missing replies. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: Fill the IPv6 flow label field to represent flow associationStefano Brivio2021-07-261-2/+2
| | | | | | | | | This isn't optional: TCP streams must carry a unique, hard-to-guess, non-zero label for each direction. Linux, probably among others, will otherwise refuse to associate packets in a given stream to the same connection. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Add PASTA mode, major reworkStefano Brivio2021-07-171-59/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Implement lazy bind for ping socketsStefano Brivio2021-05-211-2/+10
| | | | | | | | | It turns out that binding ICMP/ICMPv6 echo sockets takes a long time. Instead of binding all of them (one for each possible echo identification number, that is, 2^17) at start-up, bind them as ICMP/ICMPv6 packets are sent by the guest. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Implement ping tracking based on echo identifiersStefano Brivio2021-05-211-24/+33
| | | | | | | | | Open and bind a socket for each possible ICMP/ICMPv6 echo identifier, and add a tracking mechanism. Otherwise, multiple pings in parallel won't work, and a single ping to a different destination would make an existing ping sequence stop working. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Warn if "ping" socket can't be opened, don't failStefano Brivio2021-05-101-2/+16
| | | | | | | | If net.ipv4.ping_group_range doesn't include our PID, we'll fail to open sockets for ICMP and ICMPv6 echo. Warn instead of exiting, this is not fatal. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp, passt: Introduce socket packet buffer, avoid getsockname() for UDPStefano Brivio2021-04-301-1/+3
| | | | | | | | | | This is in preparation for scatter-gather IO on the UDP receive path: save a getsockname() syscall by setting a flag if we get the numbering of all bound sockets in a strict sequence (expected, in practice) and repurpose the tap buffer to be also a socket receive buffer, passing it down to protocol handlers. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Connection tracking for ephemeral, local ports, and related fixesStefano Brivio2021-04-291-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As we support UDP forwarding for packets that are sent to local ports, we actually need some kind of connection tracking for UDP. While at it, this commit introduces a number of vaguely related fixes for issues observed while trying this out. In detail: - implement an explicit, albeit minimalistic, connection tracking for UDP, to allow usage of ephemeral ports by the guest and by the host at the same time, by binding them dynamically as needed, and to allow mapping address changes for packets with a loopback address as destination - set the guest MAC address whenever we receive a packet from tap instead of waiting for an ARP request, and set it to broadcast on start, otherwise DHCPv6 might not work if all DHCPv6 requests time out before the guest starts talking IPv4 - split context IPv6 address into address we assign, global or site address seen on tap, and link-local address seen on tap, and make sure we use the addresses we've seen as destination (link-local choice depends on source address). Similarly, for IPv4, split into address we assign and address we observe, and use the address we observe as destination - introduce a clock_gettime() syscall right after epoll_wait() wakes up, so that we can remove all the other ones and pass the current timestamp to tap and socket handlers -- this is additionally needed by UDP to time out bindings to ephemeral ports and mappings between loopback address and a local address - rename sock_l4_add() to sock_l4(), no semantic changes intended - include <arpa/inet.h> in passt.c before kernel headers so that we can use <netinet/in.h> macros to check IPv6 address types, and remove a duplicate <linux/ip.h> inclusion Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Spare some syscalls, add some optimisations from profilingStefano Brivio2021-04-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid a bunch of syscalls on forwarding paths by: - storing minimum and maximum file descriptor numbers for each protocol, fall back to SO_PROTOCOL query only on overlaps - allocating a larger receive buffer -- this can result in more coalesced packets than sendmmsg() can take (UIO_MAXIOV, i.e. 1024), so make sure we don't exceed that within a single call to protocol tap handlers - nesting the handling loop in tap_handler() in the receive loop, so that we have better chances of filling our receive buffer in fewer calls - skipping the recvfrom() in the UDP handler on EPOLLERR -- there's nothing to be done in that case and while at it: - restore the 20ms timer interval for periodic (TCP) events, I accidentally changed that to 100ms in an earlier commit - attempt using SO_ZEROCOPY for UDP -- if it's not available, sendmmsg() will succeed anyway - fix the handling of the status code from sendmmsg(), if it fails, we'll try to discard the first message, hence return 1 from the UDP handler Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Introduce packet batching mechanismStefano Brivio2021-04-221-11/+20
| | | | | | | | | | Receive packets in batches from AF_UNIX, check if they can be sent with a single syscall, and batch them up with sendmmsg() in case. A bit rudimentary, currently only implemented for UDP, but it seems to work. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Introduce ICMP echo proxyStefano Brivio2021-03-181-0/+136
It's nice to be able to confirm connectivity using ICMP or ICMPv6 echo requests, and "ping" sockets on Linux (IPPROTO_ICMP datagram) allow us to do that without any special capability. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>