aboutgitcodebugslistschat
path: root/dhcpv6.c
Commit message (Collapse)AuthorAgeFilesLines
* Split tap_ip_send() into IPv4 and IPv6 specific functionsDavid Gibson2022-10-191-3/+3
| | | | | | | | | | | | | | | | | | | The IPv4 and IPv6 paths in tap_ip_send() have very little in common, and it turns out that every caller (statically) knows if it is using IPv4 or IPv6. So split into separate tap_ip4_send() and tap_ip6_send() functions. Use a new tap_l2_hdr() function for the very small common part. While we're there, make some minor cleanups: - We were double writing some fields in the IPv6 header, so that it temporary matched the pseudo-header for checksum calculation. With recent checksum reworks, this isn't neccessary any more. - We don't use any IPv4 header options, so use some sizeof() constructs instead of some open coded values for header length. - The comment used to say that the flow label was for TCP over IPv6, but in fact the only thing we used it for was DHCPv6 over UDP traffic Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Move logging functions to a new file, log.cStefano Brivio2022-10-141-0/+1
| | | | | | | | Logging to file is going to add some further complexity that we don't want to squeeze into util.c. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* Pack DHCPv6 "on wire" structuresDavid Gibson2022-09-291-13/+13
| | | | | | | | | | | | | | | | | | | dhcpv6.c contains a number of structures which represent actual DHCPv6 packets as they appear on the wire, which will break if the structures don't have exactly the in-memory layout we expect. Therefore, we should mark these structures as ((packed)). The contents of them means this is unlikely to change the layout in practice - and since it was working, presumably didn't on any arch we were testing on. However it's not impossible for the compiler on some arch to insert unexpected padding in one of these structures, so we should be explicit. clang-tidy warned about this since we were using memcmp() to compare some of these structures, which it thought might not have a unique representation. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Make substructures for IPv4 and IPv6 specific context informationDavid Gibson2022-07-301-9/+9
| | | | | | | | | | | | The context structure contains a batch of fields specific to IPv4 and to IPv6 connectivity. Split those out into a sub-structure. This allows the conf_ip4() and conf_ip6() functions, which take the entire context but touch very little of it, to be given more specific parameters, making it clearer what it affects without stepping through the code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* treewide: Mark constant references as constStefano Brivio2022-03-291-8/+9
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Packet abstraction with mandatory boundary checksStefano Brivio2022-03-291-81/+70
| | | | | | | | | | | | | | | | | | | | Implement a packet abstraction providing boundary and size checks based on packet descriptors: packets stored in a buffer can be queued into a pool (without storage of its own), and data can be retrieved referring to an index in the pool, specifying offset and length. Checks ensure data is not read outside the boundaries of buffer and descriptors, and that packets added to a pool are within the buffer range with valid offset and indices. This implies a wider rework: usage of the "queueing" part of the abstraction mostly affects tap_handler_{passt,pasta}() functions and their callees, while the "fetching" part affects all the guest or tap facing implementations: TCP, UDP, ICMP, ARP, NDP, DHCP and DHCPv6 handlers. Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* dhcpv6, tap, tcp: Use IN6_ARE_ADDR_EQUAL instead of open-coded memcmp()Stefano Brivio2022-03-281-1/+1
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, udp: Introduce basic DNS forwardingStefano Brivio2022-02-211-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | For compatibility with libslirp/slirp4netns users: introduce a mechanism to map, in the UDP routines, an address facing guest or namespace to the first IPv4 or IPv6 address resulting from configuration as resolver. This can be enabled with the new --dns-forward option. This implies that sourcing and using DNS addresses and search lists, passed via command line or read from /etc/resolv.conf, is not bound anymore to DHCP/DHCPv6/NDP usage: for example, pasta users might just want to use addresses from /etc/resolv.conf as mapping target, while not passing DNS options via DHCP. Reflect this in all the involved code paths by differentiating DHCP/DHCPv6/NDP usage from DNS configuration per se, and in the new options --dhcp-dns, --dhcp-search for pasta, and --no-dhcp-dns, --no-dhcp-search for passt. This should be the last bit to enable substantial compatibility between slirp4netns.sh and slirp4netns(1): pass the --dns-forward option from the script too. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Drop <linux/ipv6.h> include, carry own ipv6hdr and opt_hdr definitionsStefano Brivio2022-01-261-2/+0
| | | | | | | This is the only remaining Linux-specific include -- drop it to avoid clang-tidy warnings and to make code more portable. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Fix build with gcc 7, use std=c99, enable some more Clang checkersStefano Brivio2021-10-211-13/+14
| | | | | | | | | | | | | | Unions and structs, you all have names now. Take the chance to enable bugprone-reserved-identifier, cert-dcl37-c, and cert-dcl51-cpp checkers in clang-tidy. Provide a ffsl() weak declaration using gcc built-in. Start reordering includes, but that's not enough for the llvm-include-order checker yet. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* ndp, dhcpv6, tcp, udp: Always use link-local as source if gateway isn'tStefano Brivio2021-10-201-2/+8
| | | | | | | | | | | | This shouldn't happen on any sane configuration, but I just met an example of that: the default IPv6 gateway on the host is configured with a global unicast address, we use that as source for RA, DHCPv6 replies, and the guest ignores it. Same later on if we talk TCP or UDP and the guest has no idea where that address comes from. Use our link-local address in case the gateway address is global. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Address warnings from Clang's scan-buildStefano Brivio2021-10-201-16/+17
| | | | | | All false positives so far. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt, pasta: Completely avoid dynamic memory allocationStefano Brivio2021-10-141-2/+2
| | | | | | | | | Replace libc functions that might dynamically allocate memory with own implementations or wrappers. Drop brk(2) from list of allowed syscalls in seccomp profile. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt, pasta: Introduce command-line options and port re-mappingStefano Brivio2021-09-011-0/+3
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* dhcpv6: Fix parsing for IA_ADDR suboptions of IA_NA/IA_TAStefano Brivio2021-09-011-7/+11
| | | | | | | | | | | Once we're past the IA_NA or IA_TA option itself, before we start looking for IA_ADDR suboptions, we need to subtract the length of the option we parsed so far, otherwise we might end up reading past the end of the message, or miss some parts. While at it, streamline calculations in dhcpv6_opt(). Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: Fill the IPv6 flow label field to represent flow associationStefano Brivio2021-07-261-2/+2
| | | | | | | | | This isn't optional: TCP streams must carry a unique, hard-to-guess, non-zero label for each direction. Linux, probably among others, will otherwise refuse to associate packets in a given stream to the same connection. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* dhcpv6: Drop bogus option length test while checking for not-on-link IA_NAStefano Brivio2021-07-261-4/+1
| | | | | | | | | | | dhcpv6_opt() already reflects consumed bytes on the remaining length, and that we're not exceeding the message length. At this point, the remaining length is usually zero. While at it, drop a useless __packed__ attribute that triggers a gcc warning. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Add PASTA mode, major reworkStefano Brivio2021-07-171-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* dhcp, ndp, dhcpv6: Support for multiple DNS servers, search listStefano Brivio2021-05-211-9/+96
| | | | | | | | | | | Add support for a variable amount of DNS servers, including zero, from /etc/resolv.conf, in DHCP, NDP and DHCPv6 implementations. Introduce support for domain search list for DHCP (RFC 3397), NDP (RFC 8106), and DHCPv6 (RFC 3646), also sourced from /etc/resolv.conf. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Connection tracking for ephemeral, local ports, and related fixesStefano Brivio2021-04-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As we support UDP forwarding for packets that are sent to local ports, we actually need some kind of connection tracking for UDP. While at it, this commit introduces a number of vaguely related fixes for issues observed while trying this out. In detail: - implement an explicit, albeit minimalistic, connection tracking for UDP, to allow usage of ephemeral ports by the guest and by the host at the same time, by binding them dynamically as needed, and to allow mapping address changes for packets with a loopback address as destination - set the guest MAC address whenever we receive a packet from tap instead of waiting for an ARP request, and set it to broadcast on start, otherwise DHCPv6 might not work if all DHCPv6 requests time out before the guest starts talking IPv4 - split context IPv6 address into address we assign, global or site address seen on tap, and link-local address seen on tap, and make sure we use the addresses we've seen as destination (link-local choice depends on source address). Similarly, for IPv4, split into address we assign and address we observe, and use the address we observe as destination - introduce a clock_gettime() syscall right after epoll_wait() wakes up, so that we can remove all the other ones and pass the current timestamp to tap and socket handlers -- this is additionally needed by UDP to time out bindings to ephemeral ports and mappings between loopback address and a local address - rename sock_l4_add() to sock_l4(), no semantic changes intended - include <arpa/inet.h> in passt.c before kernel headers so that we can use <netinet/in.h> macros to check IPv6 address types, and remove a duplicate <linux/ip.h> inclusion Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* dhcpv6: Don't pass DNS option, it already comes from SLAACStefano Brivio2021-04-221-5/+0
| | | | | | | | | | | | It looks like some versions of ISC's IPv6 dhclient not only discard the DNS Recursive Name Server option if other options (Domain Search List? FQDN?) are absent, but they also drop existing entries configured via SLAAC from /etc/resolv.conf. Don't pass option 23 until I figure this out, it's anyway redundant as we pass DNS information via SLAAC (RFC 8106). Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* dhcpv6: Subtract option length before returning one optionStefano Brivio2021-04-221-1/+2
| | | | | | | | dhcpv6_opt() needs to subtract option length _before_ returning, so that callers can conveniently pass the remaining length on subsequent calls. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* dhcpv6: Fix REPLY messages with NotOnLink status codeStefano Brivio2021-04-211-9/+19
| | | | | | | | | | | | The NotOnLink status code needs to be appended to the existing IA content, because if we omit the requested addresses in the reply, ISC's dhclient handles it as a NoAddrsAvail response. Also fix length accounting (we would send a bunch of zeroes after the IA otherwise), and print an informational message with the requested address, if it's not appropriate for the link. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Introduce a DHCPv6 serverStefano Brivio2021-04-131-0/+502
This implementation, similarly to the IPv4 DHCP one, hands out a single address, which is the same as the upstream address for the host. This avoids the need for address translation as long as the client runs a DHCPv6 client. The NDP "Managed" flag is now set in Router Advertisements. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>