| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Seen with krun: we get a file descriptor via --fd, but we close it and
happily use the same number for TCP files.
The issue is that if we also get other options before --fd, with
arguments, getopt_long() stops parsing them because it sees them as
non-option values.
Use the - modifier at the beginning of optstring (before :, which is
needed to avoid printing errors) instead of +, which means we'll
continue parsing after finding unrelated option values, but
getopt_long() won't reorder them anyway: they'll be passed with option
value '1', which we can ignore.
By the way, we also need to add : after F in the optstring, so that
we're able to parse the option when given as short name as well.
Now that we change the parsing mode between close_open_files() and
conf(), we need to reset optind to 0, not to 1, whenever we call
getopt_long() again in conf(), so that the internal initialisation
of getopt_long() evaluating GNU extensions is re-triggered.
Link: https://github.com/slp/krun/issues/17#issuecomment-2294943828
Fixes: baccfb95ce0e ("conf: Stop parsing options at first non-option argument")
Fixes: 09603cab28f9 ("passt, util: Close any open file that the parent might have leaked")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The guest is usually assigned one of the host's IP addresses. That means
it can't access the host itself via its usual address. The
--map-host-loopback option (enabled by default with the gateway address)
allows the guest to contact the host. However, connections forwarded this
way appear on the host to have originated from the loopback interface,
which isn't always desirable.
Add a new --map-guest-addr option, which acts similarly but forwarded
connections will go to the host's external address, instead of loopback.
If '-a' is used, so the guest's address is not the same as the host's, this
will instead forward to whatever host-visible site is shadowed by the
guest's assigned address.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Because the host and guest share the same IP address with passt/pasta, it's
not possible for the guest to directly address the host. Therefore we
allow packets from the guest going to a special "NAT to host" address to be
redirected to the host, appearing there as though they have both source and
destination address of loopback.
Currently that special address is always the address of the default
gateway (or none). That can be a problem if we want that gateway to be
addressable by the guest. Therefore, allow the special "NAT to host"
address to be overridden on the command line with a new --map-host-loopback
option.
In order to exercise and test it, update the passt_in_ns and perf
tests to use this option and give different mapping addresses for the
two layers of the environment.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The @gw fields in the ip4_ctx and ip6_ctx give the (host's) default
gateway. We use this for two quite distinct things: advertising the
gateway that the guest should use (via DHCP, NDP and/or --config-net)
and for a limited form of NAT. So that the guest can access services
on the host, we map the gateway address within the guest to the
loopback address on the host.
Using the gateway address for this isn't necessarily the best choice
for this purpose, certainly not for all circumstances. So, start off
by splitting the notion of these into two different values: @guest_gw
which is the gateway address the guest should use and @nat_host_loopback,
which is the guest visible address to remap to the host's loopback.
Usually nat_host_loopback will have the same value as guest_gw. However
when --no-map-gw is specified we leave them unspecified instead. This
means when we use nat_host_loopback, we don't need to separately check
c->no_map_gw to see if it's relevant.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When sending frames to the guest over the tap link, we need a source MAC
address. Currently we take that from the MAC address of the main interface
on the host, but that doesn't actually make much sense:
* We can't preserve the real MAC address of packets from anywhere
external so there's no transparency case here
* In fact, it's confusingly different from how we handle IP addresses:
whereas we give the guest the same IP as the host, we're making the
host's MAC the one MAC that the guest *can't* use for itself.
* We already need a fallback case if the host doesn't have an Ethernet
like MAC (e.g. if it's connected via a point to point interface, such
as a wireguard VPN).
Change to just just use an arbitrary fixed MAC address - I've picked
9a:55:9a:55:9a:55. It's simpler and has the small advantage of making
the fact that passt/pasta is in use typically obvious from guest side
packet dumps. This can still, of course, be overridden with the -M option.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
In every place we use our_tap_ll, we only use it as a fallback if the
IPv6 gateway address is not link-local. We can avoid that conditional at
use time by doing it at initialisation of our_tap_ll instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
c->ip6.addr_ll is not like c->ip6.addr. The latter is an address for the
guest, but the former is an address for our use on the tap link. Rename it
accordingly, to 'our_tap_ll'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Despite the names, addr_ll_seen does not relate to addr_ll the same
way addr_seen relates to addr. addr_ll_seen is an observed address
from the guest, whereas addr_ll is *our* link-local address for use on
the tap link when we can't use an external endpoint address. It's
used both for passt provided services (DHCPv6, NDP) and in some cases
for connections from addresses the guest can't access.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Although it's not 100% explicit in the man page, addresses given to
the --dns option are intended to be addresses as seen by the guest.
This differs from addresses taken from the host's /etc/resolv.conf,
which must be translated to guest accessible versions in some cases.
Our implementation is currently inconsistent on this: when using
--dns-forward, you must usually also give --dns with the matching address,
which is meaningful only in the guest's address view. However if you give
--dns with a loopback addres, it will be translated like a host view
address.
Move the remapping logic for DNS addresses out of add_dns4() and add_dns6()
into add_dns_resolv() so that it is only applied for host nameserver
addresses, not for nameservers given explicitly with --dns.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
add_dns6() (but not add_dns4()) has a bug setting dns_match: it sets it to
the given address, rather than the gateway address. This is doubly wrong:
- We've just established the given address is a host loopback address
the guest can't access
- We've just set ip6.dns[] to tell the guest to use the gateway address,
so it won't use the dns_match address we're setting
Correct this to use the gateway address, like IPv4.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
get_dns() is already quite deeply nested, and future changes I have in
mind will add more complexity. Prepare for this by splitting out the
adding of a single nameserver to the configuration into its own function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Every time we call add_dns[46] we need to first check if there's space in
the c->ip[46].dns array for the new entry. We might as well make that
check in add_dns[46]() itself.
In fact it looks like the calls in get_dns() had an off by one error, not
allowing the last entry of the array to be filled. So, that bug is also
fixed by the change.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
get_dns() counts the number of guest DNS servers it adds, and gives an
error if it couldn't add any. However, this count ignores the fact that
add_dns[46]() may in some cases *not* add an entry. Use the array indices
we're already tracking to get an accurate count.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Currently add_dns[46]() take a somewhat awkward double pointer to the
entry in the c->ip[46].dns array to update. It turns out to be easier to
work with indices into that array instead.
This diff does add some lines, but it's comments, and will allow some
future code reductions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
We rely on C11 already, so we can use clearer and more type-checkable
struct assignment instead of mempcy() for copying IP addresses around.
This exposes some "pointer could be const" warnings from cppcheck, so
address those too.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
c->mac isn't a great name, because it doesn't say whose mac address it is
and it's not necessarily obvious in all the contexts we use it. Since this
is specifically the address that we (passt/pasta) use on the tap interface,
rename it to "our_tap_mac". Rename the "mac_guest" field to "guest_mac"
to be grammatically consistent.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
There are a couple of places where we somewhat messily open code formatting
an Ethernet like MAC address for display. Add an eth_ntop() helper for
this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
f6d5a5239264 moved handling of -D into a later loop. However as a side
effect it moved this from a switch block to an if block. I left a couple
of 'break' statements that don't make sense in the new context. They
should be 'continue' so that we go onto the next option, rather than
leaving the loop entirely.
Fixes: f6d5a5239264 ("conf: Delay handling -D option until after addresses are configured")
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
add_dns[46]() rely on the gateway address and c->no_map_gw being already
initialised, in order to properly handle DNS servers which need NAT to be
accessed from the guest.
Usually these are called from get_dns() which is well after the addresses
are configured, so that's fine. However, they can also be called earlier
if an explicit -D command line option is given. In this case no_map_gw
and/or c->ip[46].gw may not get be initialised properly, leading to this
doing the wrong thing.
Luckily we already have a second pass of option parsing for things which
need addresses to already be configured. Move handling of -D to there.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Given that pasta supports specifying a command to be executed on the
command line, even without the usual -- separator as long as there's
no ambiguity, we shouldn't eat up options that are not meant for us.
Paul reports, for instance, that with:
pasta --config-net ip -6 route
-6 is taken by pasta to mean --ipv6-only, and we execute 'ip route'.
That's because getopt_long(), by default, shuffles the argument list
to shift non-option arguments at the end.
Avoid that by adding '+' at the beginning of 'optstring'.
Reported-by: Paul Holzinger <pholzing@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a parent accidentally or due to implementation reasons leaks any
open file, we don't want to have access to them, except for the file
passed via --fd, if any.
This is the case for Podman when Podman's parent leaks files into
Podman: it's not practical for Podman to close unrelated files before
starting pasta, as reported by Paul.
Use close_range(2) to close all open files except for standard streams
and the one from --fd.
Given that parts of conf() depend on other files to be already opened,
such as the epoll file descriptor, we can't easily defer this to a
more convenient point, where --fd was already parsed. Introduce a
minimal, duplicate version of --fd parsing to keep this simple.
As we need to check that the passed --fd option doesn't exceed
INT_MAX, because we'll parse it with strtol() but file descriptor
indices are signed ints (regardless of the arguments close_range()
take), extend the existing check in the actual --fd parsing in conf(),
also rejecting file descriptors numbers that match standard streams,
while at it.
Suggested-by: Paul Holzinger <pholzing@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
version only
Paul reports that setting IPv4 address and gateway manually, using
--address and --gateway, causes pasta to fail inserting IPv6 routes
in a setup where multiple, inter-dependent IPv6 routes are present
on the host.
That's because, currently, any -g option implies --no-copy-routes
altogether, and any -a implies --no-copy-addrs.
Limit this implication to the matching IP version, instead, by having
two copies of no_copy_routes and no_copy_addrs in the context
structure, separately for IPv4 and IPv6.
While at it, change them to 'bool': we had them as 'int' because
getopt_long() used to set them directly, but it hasn't been the case
for a while already.
Reported-by: Paul Holzinger <pholzing@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Even though we don't use : as delimiter for the port, making square
brackets unneeded, RFC 3986, section 3.2.2, mandates them for IPv6
literals. We want IPv6 addresses there, but some users might still
specify them out of habit.
Same for IPv4 addresses: RFC 3986 doesn't specify square brackets for
IPv4 literals, but I had reports of users actually trying to use them
(they're accepted by many tools).
Allow square brackets for both IPv4 and IPv6 addresses, correct or
not, they're harmless anyway.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In addition to the struct fwd_ports used by both UDP and TCP to track
port forwarding, UDP also included an 'rdelta' field, which contained the
reverse mapping of the main port map. This was used so that we could
properly direct reply packets to a forwarded packet where we change the
destination port. This has now been taken over by the flow table: reply
packets will match the flow of the originating packet, and that gives the
correct ports on the originating side.
So, eliminate the rdelta field, and with it struct udp_fwd_ports, which
now has no additional information over struct fwd_ports.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
UDP and/or TCP can be disabled with the --no-udp and --no-tcp options.
However, when this is specified, it's still possible to configure forwarded
ports for the disabled protocol. In some cases this will open sockets and
perform other actions, which might not be safe since the entire protocol
won't be initialised.
Check for this case, and explicitly forbid it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
UNIX_SOCK_MAX is the maximum number we'll append to the socket path
if we generate it automatically. If it's given on the command line,
it can be up to UNIX_PATH_MAX (including the terminating character)
long.
UNIX_SOCK_MAX happened to kind of fit because it's 100 (instead of
108).
Commit ceddcac74a6e ("conf, tap: False "Buffer not null terminated"
positives, CWE-170") fixed the wrong problem: the right fix for the
problem at hand was actually commit cc287af173ca ("conf: Fix
incorrect bounds checking for sock_path parameter").
Fixes: ceddcac74a6e ("conf, tap: False "Buffer not null terminated" positives, CWE-170")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
| |
Spotted by Coverity just recently. Not that it really matters as
MAXDNSRCH always appears to be defined as 1025, while a full domain
name can have up to 253 characters: it would be a bit pointless to
have a longer search domain.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a log file is configured, we would otherwise open a connection to
the system logger (if any), print any message that we might have
before we initialise the log file, and then keep that connection
around for no particular reason.
Call __openlog() as an alternative to the log file setup, instead.
This way, we might skip printing some messages during the
initialisation phase, but they're probably not really valuable to
have in a system log, and we're going to print them to standard
error anyway.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now that we have logging functions embedding perror() functionality,
we can make _some_ calls more terse by using them. In many places,
the strerror() calls are still more convenient because, for example,
they are used in flow debugging functions, or because the return code
variable of interest is not 'errno'.
While at it, convert a few error messages from a scant perror style
to proper failure descriptions.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
perror() prints directly to standard error, but in many cases standard
error might be already closed, or we might want to skip logging, based
on configuration. Our logging functions provide all that.
While at it, make errors more descriptive, replacing some of the
existing basic perror-style messages.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We currently use a LOG_EMERG log mask to represent the fact that we
don't know yet what the mask resulting from configuration should be,
before the command line is parsed.
However, we have the necessity of representing another phase as well,
that is, configuration is parsed but we didn't daemonise yet, or
we're not ready for operation yet. The next patch will add that
notion explicitly.
Mapping these cases to further log levels isn't really practical.
Introduce boolean log flags to represent them, instead of abusing
log priorities.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The original behaviour of printing messages to standard error by
default when running from a non-interactive terminal was introduced
because the first KubeVirt integration draft used to start passt in
foreground and get messages via standard error.
For development purposes, the system logger was more convenient at
that point, and passt was running from interactive terminals only if
not started by the KubeVirt integration.
This behaviour was introduced by 84a62b79a2bc ("passt: Also log to
stderr, don't fork to background if not interactive").
Later, I added command-line options in 1e49d194d017 ("passt, pasta:
Introduce command-line options and port re-mapping") and accidentally
reversed this condition, which wasn't a problem as --stderr could
force printing to standard error anyway (and it was used by KubeVirt).
Nowadays, the KubeVirt integration uses a log file (requested via
libvirt configuration), and the same applies for Podman if one
actually needs to look at runtime logs. There are no use cases left,
as far as I know, where passt runs in foreground in non-interactive
terminals.
Seize the chance to reintroduce some sanity here. If we fork to
background, standard error is closed, so --stderr is useless in that
case.
If we run in foreground, there's no harm in printing messages to
standard error, and that accidentally became the default behaviour
anyway, so --stderr is not needed in that case.
It would be needed for non-interactive terminals, but there are no
use cases, and if there were, let's log to standard error anyway:
the user can always redirect standard error to /dev/null if needed.
Before we're up and running, we need to print to standard error anyway
if something happens, otherwise we can't report failure to start in
any kind of usage, stand-alone or in integrations.
So, make --stderr do nothing, and deprecate it.
While at it, drop a left-over comment about --foreground being the
default only for interactive terminals, because it's not the case
anymore.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
If we don't run in foreground, we close standard error as we
daemonise, so it makes no sense to check if the controlling terminal
is an interactive terminal or if --force-stderr was given, to decide
if we want to log to standard error.
Make --force-stderr depend on --foreground.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In multiple occasions, especially when passt(1) and pasta(1) are used
in integrations such as the one with Podman, the ability to override
earlier options on the command line with later one would have been
convenient.
Recently, to debug a number of issues happening with Podman, I would
have liked to ask users to share a debug log by passing --debug as
additional option, but pasta refuses --quiet (always passed by Podman)
and --debug at the same time.
On top of this, Podman lets users specify other pasta options in its
containers.conf(5) file, as well as on the command line.
The options from the configuration files are appended together with
the ones from the command line, which makes it impossible for users to
override options from the configuration file, if duplicated options
are refused, unless Podman takes care of sorting them, which is
clearly not sustainable.
For --debug and --trace, somebody took care of this on Podman side at:
https://github.com/containers/common/pull/2052
but this doesn't fix the issue with other options, and we'll have
anyway older versions of Podman around, too.
I think there's some value in telling users about duplicated or
conflicting options, because that might reveal issues in integrations
or accidental misconfigurations, but by now I'm fairly convinced that
the downsides outweigh this.
Drop checks about duplicate options and mutually exclusive ones. In
some cases, we need to also undo a couple of initialisations caused
by earlier options, but this looks like a simplification, overall.
Notable exception: --stderr still conflicts with --log-file, because
users might have the expectation that they don't actually conflict.
But they do conflict in the existing implementation, so it's safer
to make sure that the users notice that.
Suggested-by: Paul Holzinger <pholzing@redhat.com>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
As we are going to introduce the MODE_VU that will act like
the mode MODE_PASST, compare to MODE_PASTA rather than to add
a comparison to MODE_VU when we check for MODE_PASST.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Functions and structures in lineread.c use plain int to record and report
the length of lines we receive. This means we truncate the result from
read(2) in some circumstances. Use ssize_t to avoid that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In conf() we parse a MAC address in two places, for the --ns-mac-addr and
the -M options. As well as duplicating code, the logic for this parsing
has several bugs:
* The most serious is that if the given string is shorter than a MAC
address should be, we'll access past the end of it.
* We don't check the endptr supplied by strtol() which means we could
ignore certain erroneous contents
* We never check the separator characters between each octet
* We ignore certain sorts of garbage that follow the MAC address
Correct all these bugs in a new parse_mac() helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The message from usage() when given invalid options, or the -h / --help
option is currently printed by many calls to the info() function, also
used for runtime logging of informational messages.
That isn't useful: the usage message should always go to the terminal
(stdout or stderr), never syslog or a logfile. It should never be
filtered by priority. Really the only thing using the common logging
functions does is give more opportunities for something to go wrong.
Replace all the info() calls with direct fprintf() calls. This does mean
manually adding "\n" to each message. A little messy, but worth it for the
simplicity in other dimensions. While we're there make much heavier use
of single strings containing multiple lines of output text. That reduces
the number of fprintf calls, reducing visual clutter and making it easier
to see what the output will look like from the source.
Link: https://bugs.passt.top/show_bug.cgi?id=90
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
usage() does nothing but call print_usage() with EXIT_FAILURE as a
parameter. It's no more complex to just give that parameter at the single
call site. Eliminate it and rename print_usage() to just usage().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
| |
We have pidfile_fd now, pid_file_fd would be quite ugly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Otherwise, if the user runs us as root, and gives us paths that are
only accessible by root, we'll fail to open them, which might in turn
encourage users to change permissions or ownerships: definitely a bad
idea in terms of security.
Reported-by: Minxi Hou <mhou@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
libguestfs tools have a good reason to run as root: if the guest image
is owned by root, it would be counterproductive to encourage users to
invoke them as non-root, as it would require changing permissions or
ownership of the image file.
And if they run as root, we'll start as root, too. Warn users we'll
switch to 'nobody', but don't tell them what to do.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
In conf() we temporarily set the forwarding mode variables to 0 - an
invalid value, so that we can check later if they've been set by the
intervening logic. clang-tidy 18.1.1 in Fedora 40 now complains about
this. Satisfy it by giving an name in the enum to the 0 value.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
...simply resort to using locally-administered address (LAA) as
host-side source, instead.
Pick 02:00:00:00:00:00, to make it clear that we don't actually care
about that address, and also to match the 00 (Administratively
Assigned Identifier) quadrant of SLAP (RFC 8948).
Otherwise, pasta refuses to start if the template is a tun or
Wireguard interface.
Link: https://bugs.passt.top/show_bug.cgi?id=49
Link: https://github.com/containers/podman/issues/22320
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
| |
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since f919dc7a4b1c ("conf, netlink: Don't require a default route to
start"), if there is only one host interface with routes, we will pick that
as the template interface, even if there are no default routes for an IP
version. Unfortunately this selection had a serious flaw: in some cases
it would 'return' in the middle of an nl_foreach() loop, meaning we
wouldn't consume all the netlink responses for our query. This could cause
later netlink operations to fail as we read leftover responses from the
aborted query.
Rewrite the interface detection to avoid this problem. While we're there:
* Perform detection of both default and non-default routes in a single
pass, avoiding an ugly goto
* Give more detail on error and working but unusual paths about the
situation (no suitable interface, multiple possible candidates, etc.).
Fixes: f919dc7a4b1c ("conf, netlink: Don't require a default route to start")
Link: https://bugs.passt.top/show_bug.cgi?id=83
Link: https://github.com/containers/podman/issues/22052
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2270257
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Use info(), not warn() for somewhat expected cases where one
IP version has no default routes, or no routes at all]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There might be isolated testing environments where default routes and
global connectivity are not needed, a single interface has all
non-loopback addresses and routes, and still passt and pasta are
expected to work.
In this case, it's pretty obvious what our upstream interface should
be, so go ahead and select the only interface with at least one
route, disabling DHCP and implying --no-map-gw as the documentation
already states.
If there are multiple interfaces with routes, though, refuse to start,
because at that point it's really not clear what we should do.
Reported-by: Martin Pitt <mpitt@redhat.com>
Link: https://github.com/containers/podman/issues/21896
Signed-off-by: Stefano brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
| |
We might have read from resolv.conf, or from the command line, a
resolver that's reachable via loopback address, but that doesn't mean
we can offer that via DHCP, NDP or DHCPv6: warn if there are no
resolvers we can offer for a given IP version.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
...that is, call add_dns4() and add_dns6() instead of simply adding
those to the list of servers we advertise.
Most importantly, this will set the 'dns_host' field for the matching
IP version, so that, as mentioned in the man page, servers passed via
--dns are used for DNS mapping as well, if used in combination with
--dns-forward.
Reported-by: Paul Holzinger <pholzing@redhat.com>
Link: https://bugs.passt.top/show_bug.cgi?id=82
Fixes: 89678c515755 ("conf, udp: Introduce basic DNS forwarding")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Paul Holzinger <pholzing@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Starting from commit 3a2afde87dd1 ("conf, udp: Drop mostly duplicated
dns_send arrays, rename related fields"), we won't add to c->ip4.dns
and c->ip6.dns nameservers that can't be used by the guest or
container, and we won't advertise them.
However, the fact that we don't advertise any nameserver doesn't mean
that we didn't find any, and we should warn only if we couldn't find
any.
This is particularly relevant in case both --dns-forward and
--no-map-gw are passed, and a single loopback address is listed in
/etc/resolv.conf: we'll forward queries directed to the address
specified by --dns-forward to the loopback address we found, we
won't advertise that address, so we shouldn't warn: this is a
perfectly legitimate usage.
Reported-by: Paul Holzinger <pholzing@redhat.com>
Link: https://github.com/containers/podman/issues/19213
Fixes: 3a2afde87dd1 ("conf, udp: Drop mostly duplicated dns_send arrays, rename related fields")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Paul Holzinger <pholzing@redhat.com>
|
