aboutgitcodebugslistschat
Commit message (Collapse)AuthorAgeFilesLines
* tests: Move distro image download to asset build makefileDavid Gibson2022-07-146-46/+178
| | | | | | | | | | | | Rather than directly download distro images from the test scripts, handle all the downloads during the test asset build, then just clone them for the tests themselves. This avoids repeated downloads which can be very slow when debugging failing tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Add OPENSUSE_IMGS to DOWNLOAD_ASSETS in Makefile, and note that xzcat doesn't take a -O option in test/distro/opensuse] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Explicitly list test files in test/run, remove "onlyfor" supportDavid Gibson2022-07-1423-67/+31
| | | | | | | | | | | | | | | | | Currently test/run uses wildcards to run all of the tests in a directory. However, that wildcard list is filtered down by the "onlyfor" directives in the test files... usually to a single file. Therefore, just explicitly list the files we *really* want to run for this test mode. This makes it easier to see at the top level what tests will be executed, and to change that list temporarily while debugging specific failures. This means the "onlyfor" directive no longer has any purpose, and we can remove it. "onlyfor" was also the only used of the $MODE variable, so we can remove that too. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Don't automatically traverse directories of test filesDavid Gibson2022-07-142-26/+26
| | | | | | | | | | | | | | | The top level listing control of which tests to run is in test/run, however it uses the test() function which runs an entire directory of test files, filtered by some criteria. This makes it awkward to narrow down to a subset of tests when debugging a specific failure. To make this easier, have test() take an explicit list of test files to run, and have the caller in test/run handle the directory traversal. The construct we use for this is pretty awkward to handle the fact that we're in the source tree root directory rather than test/ at this point in test/run. Later cleanups will improve that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Remove not-very-useful "req" directiveDavid Gibson2022-07-143-53/+31
| | | | | | | | | | | | | | | | | The test scripts support a "req" directive which requires one test script to be run before another. It's implemented by doing a topological sort based on these directives in the runner scripts, which is about as awkward as you'd expect in Bourne shell. It turns out we only use this functionality in one place - to make the "make install" test run after the plain "make" test. We also already have a simpler way of making sure tests run in a specific order: just put them into the same test script file. So, remove support for the "req" directive and just fold the build/all and build/install test scripts together. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Remove unused set_mode() functionDavid Gibson2022-07-141-13/+0
| | | | | | This utility function is never called. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Clean up passt.pid fileDavid Gibson2022-07-142-1/+3
| | | | | | | | If the tests are interrupted at the right point a passt.pid file can be left over. Clean it up with "make clean" and add it to .gitignore so it doesn't get accidentally committed. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Search multiple places for aarch64 EDK2 bios imageDavid Gibson2022-07-146-13/+30
| | | | | | | | | | | | | | | | | Apparently qemu's ARM virt machine needs to be explicitly given a firmware image, rather than just supplying a sane default. Unfortunately the EDK2 firmware image we need isn't in the same place on all host distros. Currently the test scripts hardcode the Debian location, meaning it will break on hosts that have it somewhere else. This patch searches multiple locations for the firmware, and creates a local link during the asset build phase, which the tests can then use. For now it only searches the locations used by Debian and Fedora, but that's a small improvement in robustness already, and can be later improved further if we need to. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Move mbuto download and execution to asset buildDavid Gibson2022-07-143-19/+16
| | | | | | | | | | | | Move the download of mbuto and using it to create a sample initramfs to the asset build makefile, rather than embedding it in the test scripts themselves. The two_guests tests used to use two separate copies of the mbuto image. As an initramfs the mbuto image is strictly readonly though, so that's not necessary. So, also use the same image for both guests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Introduce makefile for building test assetsDavid Gibson2022-07-142-1/+28
| | | | | | | | | | | | | | A number of passt/pasta testcases have initial steps which are just about building images or other assets we need for the test proper. Repeating these for each test run can be quite costly. This patch makes a start on moving this sort of test asset building to a separate phase before running the tests proper. For now just add a Makefile to handle the asset building (although it doesn't build anything yet), and make the path where we'll be building the assets available to the tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Invoke specific qemu-system-* binariesDavid Gibson2022-07-147-34/+43
| | | | | | | | | | | | | | | | | | | | | | A lot of tests and examples invoke qemu with the command "kvm". However, as far as I can tell, "kvm" being aliased to the appropriate qemu system binary is Debian specific. The binary names from qemu upstream - qemu-system-$ARCH - also aren't universal, but they are more common (they should be good for both Debian and Fedora at least). In order to still get KVM acceleration when available, we use the option "-M accel=kvm:tcg" to tell qemu to try using either KVM or TCG in that order A number of the places we invoked "kvm" are expecting specifically an x86 guest, and so it's also safer to explicitly invoke qemu-system-x86_64. Some others appear to be independent of the target arch (just wanting the same arch as the host to allow KVM acceleration). Although I suspect there may be more subtle x86 specific options in the qemu command lines, attempt to preserve arch independence by using $(uname -m). Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: qemu-system-ppc64le isn't a thingDavid Gibson2022-07-142-6/+6
| | | | | | | | | | | | Several tests run pp64le guests using "qemu-system-ppc64le". But, at the system level there's no difference between ppc64 and ppc64le - it's the same hardware, just placed into different endian modes by OS early boot code. Reflecting that, qemu only supplies a single "qemu-system-ppc64". Some distros alias qemu-system-ppc64le to qemu-system-ppc64 (Debian does), but it's best not to count on this (Fedora doesn't, for example). Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Handle the case of a DNS server on localhostDavid Gibson2022-07-141-0/+16
| | | | | | | | | | | | | | | | | | By default, passt detects the nameserver used by the host system by reading /etc/resolv.conf, and advertises that to the guest via DHCP. However this breaks down if the host's nameserver is local (on 127.0.0.1 or ::1); connecting to localhost on the guest won't reach the host's nameserver. Using a local nameserver is a reasonably common case when using dnsmasq or similar to merge name resolution on a home network with name resolution from an organization-private VPN. We already have the gateway mapping support to allow reaching host-local services from the guest via the address of the default gateway. Add code to detect the case of a local DNS server and use the gateway mapping to advertise it usefully to the guest. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Embed script for dhclient(8) in mbuto(1) profileStefano Brivio2022-07-144-10/+26
| | | | | | | | | | | | | | | | | | | | | | | | | David reports that dhclient-script(8) on Fedora needs a number of binaries that are not included in PROGS of the current mbuto profile, and we would also need to include hostnamectl(1) there, which will fail without a systemd init. Embed a minimal script for dhclient(8) in the profile itself, written to /sbin/dhclient-script at boot, to just check what we need to check out of DHCP and DHCPv6 functionality. While at it, drop busybox and logger from PROGS, as we don't need them, and add hostname(1). While DHCP option 12 isn't supported yet by the DHCP implementation in passt, we should probably add it soon. Note: owing to the simplicity of this script, we now need to bring up the interface before starting dhclient: add this in test scripts where it's not the case yet. Reported-by: David Gibson <david@gibson.dropbear.id.au> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> note that we need to bring up the interface before starting dhclient
* qrap: Don't rely on errno after perror(), and reset it before usageStefano Brivio2022-07-061-6/+13
| | | | | | | | | | | | | | | | | | In commit fca5e11773d0 ("qrap: Add probe retry on connection reset from passt for KubeVirt integration") I just used errno to check if the connection was reset on recv(), but perror() might set it to EINVAL if e.g. an underlying logging mechanism fails, so we won't actually catch the connection reset. And in case recv() returns 0, errno won't be set, but we're still using it without resetting it first, which leads to unpredictable results in that case. Reset errno before probing with connect(), send() and recv(), and save it for later checks before calling perror(). Fixes: fca5e11773d0 ("qrap: Add probe retry on connection reset from passt for KubeVirt integration") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Remove unused line_read()David Gibson2022-07-061-54/+0
| | | | | | The old, ugly implementation of line_read() is no longer used. Remove it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Use new lineread implementation for procfs_scan_listen()David Gibson2022-07-061-4/+6
| | | | | | | Use the new more solid implementation of line by line reading for procfs_scan_listen(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Parse resolv.conf with new lineread implementationDavid Gibson2022-07-061-8/+14
| | | | | | | | | | | Switch the resolv.conf parsing in conf.c to use the new lineread implementation. This means that it can now handle a resolv.conf file which contains blank lines. There are quite a few other fragilities with the resolv.conf parsing, but that's out of scope for this patch. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Add cleaner line-by-line reading primitivesDavid Gibson2022-07-063-4/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Two places in passt need to read files line by line (one parsing resolv.conf, the other parsing /proc/net/*. They can't use fgets() because in glibc that can allocate memory. Instead they use an implementation line_read() in util.c. This has some problems: * It has two completely separate modes of operation, one buffering and one not, the relation between these and how they're activated is subtle and confusing * At least in non-buffered mode, it will mishandle an empty line, folding them onto the start of the next non-empty line * In non-buffered mode it will use lseek() which prevents using this on non-regular files (we don't need that at present, but it's a surprising limitation) * It has a lot of difficult to read pointer mangling Add a new cleaner implementation of allocation-free line-by-line reading in lineread.c. This one always buffers, using a state structure to keep track of what we need. This is larger than I'd like, but it turns out handling all the edge cases of line-by-line reading in C is surprisingly hard. This just adds the code, subsequent patches will change the existing users of line_read() to the new implementation. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* test: Add external mbuto profile, drop udhcpc, and switch to itStefano Brivio2022-07-063-2/+39
| | | | | | | | | This depends on a future change in mbuto to accept external profile files. Add a file defining what we need for tests and demos, dropping udhcpc and script as they're not needed anymore, and switch to it. Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* qrap: Increase number of retries on connection reset even furtherStefano Brivio2022-06-271-1/+1
| | | | | | | | | ...if there are two or more instances of libvirt in a KubeVirt scenario using a number of instances of passt, the overlap period with probing instances of qemu becomes much longer. Switch to 50 retries instead of 5. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* qrap: Change number of retries and delay on connection resetStefano Brivio2022-06-271-6/+6
| | | | | | | | One retry after 100ms was enough for static builds, where qrap takes a while to start, but it's sometimes not enough with regular builds. Switch that to five retries with 50ms delay. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Makefile: Don't create extraneous -.s fileDavid Gibson2022-06-181-1/+1
| | | | | | | | | | In order to probe availability of certain features the Makefile test compiles a handful of tiny snippets, feeding those in from stdin. However in one case - the one for -fstack-protector - it forgets to redirect the output to stdout, meaning it creates a stray '-.s' file when make is invoked (even make clean). Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Makefile: Tweak $(RM) usageDavid Gibson2022-06-181-3/+3
| | | | | | | | | | | The use of rm commands in the clean and uninstall targets adds an explicit leading - to ignore errors. However the built-in RM variable in make is actually "rm -f" which already ignores errors, so the - isn't neccessary. Also replace ${RM} with $(RM) which is the more conventional form in Makefiles. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Makefile: Simplify pasta* targets with a pattern ruleDavid Gibson2022-06-181-8/+2
| | | | | | | | pasta, pasta.avx2 and pasta.1 are all generated as a link to the corresponding passt file. We can consolidate the 3 rules for these targets into a single pattern rule. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Makefile: Use $(BIN) and $(MANPAGES) variable to simplify several targetsDavid Gibson2022-06-185-18/+16
| | | | | | | | | | | | | | There are several places which explicitly list the various generated binaries, even though a $(BIN) variable already lists them. There are several more places that list all the manpage files, introduce a $(MANPAGES) variable to remove that repetition as well. Tweak the generation of pasta.1 as a link to passt.1 so it's not just made as a side effect of the pasta target. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: add passt.1 and qrap.1 to guest files for distro tests] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Makefile: Avoid using wildcard sourcesDavid Gibson2022-06-182-17/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | The passt/pasta Makefile makes fairly heavy use of GNU make's $(wildcard) function to locate the sources and headers to build. Using wildcards for the things to compile is usually a bad idea though: if somehow you end up with a .c or .h file in your tree you didn't expect it can misbuild in an exceedingly confusing way. In particular this can sometimes happen if switching between releases / branches where files have been added or removed without 100% cleaning the tree. It also makes life a bit complicated if building multiple different binaries in the same tree: we already have some rather awkward $(filter-out) constructions to avoid including qrap.c in the passt build. Replace use of $(wildcard) with the more idiomatic approach of defining variables listing all the relevant source files then using that throughout. In the rule for seccomp.h there was also a bare "*.c" which caused make to always rebuild that target. Fix that as well. Similarly, seccomp.sh uses a wildcard to locate the sources, which is unwise for the same reasons. Make it take the sources to examine on the command line instead, and have the Makefile pass them in from the same variables. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* conf: In conf_runas(), on static builds, group information is also unusedStefano Brivio2022-06-181-0/+1
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: Add informational messages for UNIX domain socket connectionsStefano Brivio2022-06-181-0/+10
| | | | | | | | | ...namely, as connections are discarded or accepted. This was quite useful to debug an issue with libvirtd failing to start qemu (because passt refused the new connection) as a previous qemu instance was still active. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* qrap: Add probe retry on connection reset from passt for KubeVirt integrationStefano Brivio2022-06-181-1/+33
| | | | | | | | | | | | | | | | | | KubeVirt uses libvirt to start qrap in its current draft integration (https://github.com/kubevirt/kubevirt/pull/7849/), and libvirtd starts qrap three times every time a new virtual machine is created: once on domain creation, and twice on domain start (for "probing") and to finally start it for real. Very often, a subsequent invocation of qrap happen before the previously running instance of qemu terminates, which means that passt will refuse the new connection as the old one is still active. Introduce a single retry with a 100ms delay to work around this. This should be checked again once native libvirt support is there, and that point qrap will have no reason to exist anymore. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Makefile: Suppress unusedStructMember Cppcheck warning in dhcp.cStefano Brivio2022-06-181-0/+2
| | | | | | | | | | | | | | | New from Cppcheck 2.8: all the fields of struct msg that are not directly manipulated are now reported as unused, which is kind of correct as those fields are used as a blob "copied" from request to response and not as separate fields. However, keeping the message composition explicit is probably desirable, and adding inline suppressions makes the whole thing rather unreadable, so just suppress unusedStructMember warnings for dhcp.c, while also adding a suppression for unmatched suppressions to keep earlier versions of Cppcheck happy. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Use nmap-ncat instead of openbsd netcat for pasta testsDavid Gibson2022-06-184-47/+48
| | | | | | | | | | | | | | | | A number of the testcases use options specific the OpenBSD version of netcat. That's available in Debian, but not easily available in Fedora. Switch the pasta tests to using the nmap version of netcat (a.k.a. ncat). This is easily available in both Debian and Fedora, and appears to be a bit more modern and maintained as well. ncat generally requires explicit listen addresses (which is good for clarity anywhere). Its default options appear to remove the need for the -N and -q options. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: changed one ncat listening address to IPv6 loopback] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Use dhclient instead of udhcpcDavid Gibson2022-06-154-16/+8
| | | | | | | | | | | | For some reason, the passt/pasta tests and examples use dhclient for DHCPv6, but in most cases use udhcpc for DHCPv4. Change it to use dhclient for both DHCPv4 and DHCPv6. This means one less tool we need for testing, plus dhclient is easily available on Fedora whereas udhcpc is not. Note that the passt tests still rely on udhcpc indirectly because mbuto wants to put it into the guest images it generates. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Tweak dhclient arguments for readabilityDavid Gibson2022-06-1510-17/+17
| | | | | | | | | | | | | | A number of tests and examples use dhclient in both IPv4 and IPv6 modes. We use "dhclient -6" for IPv6, but usually just "dhclient" for IPv4. Add an explicit "-4" argument to make it more clear and explicit. In addition, when dhclient is run from within pasta it usually won't be "real" root, and so will not have access to write the default global pid file. This results in a mostly harmless but irritating error: Can't create /var/run/dhclient.pid: Permission denied We can avoid that by using the --no-pid flag to dhclient. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Don't abbreviate ip(8) arguments in examples and testsDavid Gibson2022-06-1522-114/+114
| | | | | | | | ip(8)'s ability to take abbreviated arguments (e.g. "li sh" instead of "link show") is very handy when using it interactively, but it doesn't make for very readable scripts and examples when shown that way. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Use more explicit netcat options for distro/fedora testsDavid Gibson2022-06-151-7/+7
| | | | | | | | | | | | | | | | | | distro/fedora contains two versions of the basic tests, used for different Fedora versions. One uses explicit listening address for netcat in some extra places, the other does not. Apparently the older netcat versions didn't require the explicit addresses. Not supplying addresses doesn't test anything useful though, just a detail in netcat's behaviour. So, it's cleaner to just always supply explicit addresses. In addition, we're explicitly expecting the nmap version of ncat, also known as "ncat". So, it's more explicit what we're after if we invoke it via that name rather than "nc", which will go via an /etc/alternatives link. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Fix port argument in distro_quick_pasta_test{,_fedora34} too] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* README: Fix links to static buildsStefano Brivio2022-06-081-2/+2
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Silence warning from gcc 11.3 with -OfastStefano Brivio2022-06-082-4/+10
| | | | | | | If the first packet_get() call doesn't assign len, the second one will also return NULL, but gcc doesn't see this. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* contrib/fedora: Use pre-processing macros in spec fileStefano Brivio2022-06-083-6/+38
| | | | | | ...they seem to be supported by COPR now and make things simpler. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* contrib/fedora: Drop dashes from versionStefano Brivio2022-06-071-3/+3
| | | | | | COPR doesn't like them, and I'm trying to build packages there now. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf: Fix one Coverity CID 258163 warning, work around another oneStefano Brivio2022-05-201-5/+3
| | | | | | | | | | | | | | | In conf_runas(), Coverity reports that we might dereference uid and gid despite possibly being NULL (CWE-476) because of the check after the first sscanf(). They can't be NULL, but I actually wanted to check that UID and GID are non-zero (the user could otherwise pass --runas root:root and defy the whole mechanism). Later on, we have the same type of warning for 'gr': it's compared against NULL, so it might be NULL, which is actually the case: but in that case, we don't dereference it, because we'll return -ENOENT right away. Rewrite the clause to silence the warning. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Work around gcc 12 bogus warning in tcp_rtt_dst_check()Stefano Brivio2022-05-201-0/+6
| | | | | | | | | | | | | | | | | | | gcc 12.1.x (e.g. current OpenSUSE Tumbleweed, x86_64 only, gcc-12-1.4.x86_64) reports: tcp.c: In function ‘tcp_send_flag’: tcp.c:1014:9: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=] 1014 | memcpy(low_rtt_dst + hole++, &conn->a.a6, sizeof(conn->a.a6)); | ^ tcp.c:559:24: note: at offset -16 into destination object ‘low_rtt_dst’ of size 128 559 | static struct in6_addr low_rtt_dst[LOW_RTT_TABLE_SIZE]; | but 'hole' can't be -1, because the low_rtt_dst table is guaranteed to have a hole: if we happened to write to the last entry, we'll go back to index 0 and clear that one. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf: Add --runas option, changing to given UID and GID if started as rootStefano Brivio2022-05-196-46/+135
| | | | | | | | | | | | | | On some systems, user and group "nobody" might not be available. The new --runas option allows to override the default "nobody" choice if started as root. Now that we allow this, drop the initgroups() call that was used to add any additional groups for the given user, as that might now grant unnecessarily broad permissions. For instance, several distributions have a "kvm" group to allow regular user access to /dev/kvm, and we don't need that in passt or pasta. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Ignore bogus -Wstringop-overread for write() from gcc 12.1Stefano Brivio2022-05-192-0/+27
| | | | | | | | | | | | | | | | | With current OpenSUSE Tumbleweed on aarch64 (gcc-12-1.3.aarch64) and on x86_64 (gcc-12-1.4.x86_64), but curiously not on armv7hl (gcc-12-1.3.armv7hl), gcc warns about using the _pointer_ to the 802.3 header to write the whole frame to the tap descriptor: reading between 62 and 4294967357 bytes from a region of size 14 which is bogus: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103483 Probably declaring udp_sock_fill_data_v{4,6}() as noinline would "fix" this, but that's on the data path, so I'd rather not. Use a gcc pragma instead. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Don't check exit code for every command in demo modeStefano Brivio2022-05-191-0/+3
| | | | | | | Having all those 'echo $?' is rather distracting in demos. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Sefano Brivio <sbrivio@redhat.com>
* tests: Don't count number of test units for demosStefano Brivio2022-05-191-2/+4
| | | | | | | | ...there are no 'test' directives in demo, and this causes a script failure. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* demo/pasta: Fix bad sleep directiveStefano Brivio2022-05-191-1/+1
| | | | | | | | 'sleep' always needs an argument, this was meant to introduce a 2 seconds delay. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/run: Return 0 from run(), exit value already reflects failuresStefano Brivio2022-05-191-1/+1
| | | | | | | | | | | There's no need to return non-zero if there have been failures in run(), because the exit value is already determined from the number of failures reported in the log file. Return zero, so that this doesn't cause the script to fail, given we now run it with -e. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/perf/pasta_udp: Drop redundant assignment of ::1 to loopback interfaceStefano Brivio2022-05-191-1/+0
| | | | | | | | | | | There are a few occurrences of this assignment, which are needed to re-add ::1 as loopback address after the MTU has been increased back from a value below 1280 bytes. This one, however, is redundant, and causes an error in the execution. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Simplify explicit checks for command successDavid Gibson2022-05-195-52/+24
| | | | | | | | | A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Simplify *tools commands using pane_statusDavid Gibson2022-05-191-15/+10
| | | | | | | | | Now that we have pane_status to check the success of commands issued to panes, we can more easily check for the success of the 'which' commands used to check tool availability, rather than constructing, then parsing special "skip" output. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>