aboutgitcodebugslistschat
Commit message (Collapse)AuthorAgeFilesLines
...
* flow: Add flow_sidx_valid() helperDavid Gibson2024-07-053-5/+15
| | | | | | | | | | | | | | | | | To implement the TCP hash table, we need an invalid (NULL-like) value for flow_sidx_t. We use FLOW_SIDX_NONE for that, but for defensiveness, we treat (usually) anything with an out of bounds flow index the same way. That's not always done consistently though. In flow_at_sidx() we open code a check on the flow index. In tcp_hash_probe() we instead compare against FLOW_SIDX_NONE, and in some other places we use the fact that flow_at_sidx() will return NULL in this case, even if we don't otherwise need the flow it returns. Clean this up a bit, by adding an explicit flow_sidx_valid() test function. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: sock_l4() determine protocol from epoll type rather than the reverseDavid Gibson2024-07-057-67/+81
| | | | | | | | | | | | sock_l4() creates a socket of the given IP protocol number, and adds it to the epoll state. Currently it determines the correct tag for the epoll data based on the protocol. However, we have some future cases where we might want different semantics, and therefore epoll types, for sockets of the same protocol. So, change sock_l4() to take the epoll type as an explicit parameter, and determine the protocol from that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf: Use the right maximum buffer size for c->sock_pathStefano Brivio2024-07-021-1/+1
| | | | | | | | | | | | | | | | | | | UNIX_SOCK_MAX is the maximum number we'll append to the socket path if we generate it automatically. If it's given on the command line, it can be up to UNIX_PATH_MAX (including the terminating character) long. UNIX_SOCK_MAX happened to kind of fit because it's 100 (instead of 108). Commit ceddcac74a6e ("conf, tap: False "Buffer not null terminated" positives, CWE-170") fixed the wrong problem: the right fix for the problem at hand was actually commit cc287af173ca ("conf: Fix incorrect bounds checking for sock_path parameter"). Fixes: ceddcac74a6e ("conf, tap: False "Buffer not null terminated" positives, CWE-170") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* tcp_splice: Check return value of setsockopt() for SO_RCVLOWATStefano Brivio2024-07-021-5/+10
| | | | | | | | | Spotted by Coverity, harmless as we would consider that successful and check on the socket later from the timer, but printing a debug message in that case is definitely wise, should it ever happen. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf: Copy up to MAXDNSRCH - 1 bytes, not MAXDNSRCHStefano Brivio2024-07-021-1/+1
| | | | | | | | | | Spotted by Coverity just recently. Not that it really matters as MAXDNSRCH always appears to be defined as 1025, while a full domain name can have up to 253 characters: it would be a bit pointless to have a longer search domain. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* udp: Reduce scope of rport in udp_invert_portmap()2024_06_24.1ee2ecaStefano Brivio2024-06-241-2/+10
| | | | | | | | | | | | | | cppcheck 2.14 warns that the scope of the rport variable could be reduced: do that, as reverted commit c80fa6a6bb44 ("udp: Make rport calculation more local") did, but keep the temporary variable of in_port_t type, otherwise the sum gets promoted to int. While at it, add a comment explaining why we calculate rport like this instead of directly using the sum as array index. Reported-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* Revert "udp: Make rport calculation more local"Stefano Brivio2024-06-241-1/+2
| | | | | | | | | | | This reverts commit c80fa6a6bb4415ad48f9e11424310875d0d99bc7, as it reintroduces the issue fixed by commit 1e6f92b995a9 ("udp: Fix 16-bit overflow in udp_invert_portmap()"). Reported-by: Laurent Jacquot <jk@lutty.net> Link: https://bugs.passt.top/show_bug.cgi?id=80 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* log: Don't report syslog failures to stderr after initialisationStefano Brivio2024-06-211-1/+1
| | | | | | | | | If we daemonised, we can't use standard error. If we didn't, it's rather annoying to have all those messages on standard error anyway, and kind of pointless too, as the messages we wanted to print were printed to standard error anyway. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, passt: Don't call __openlog() if a log file is usedStefano Brivio2024-06-212-8/+5
| | | | | | | | | | | | | | | | | | If a log file is configured, we would otherwise open a connection to the system logger (if any), print any message that we might have before we initialise the log file, and then keep that connection around for no particular reason. Call __openlog() as an alternative to the log file setup, instead. This way, we might skip printing some messages during the initialisation phase, but they're probably not really valuable to have in a system log, and we're going to print them to standard error anyway. Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* treewide: Replace strerror() callsStefano Brivio2024-06-2111-77/+53
| | | | | | | | | | | | | | Now that we have logging functions embedding perror() functionality, we can make _some_ calls more terse by using them. In many places, the strerror() calls are still more convenient because, for example, they are used in flow debugging functions, or because the return code variable of interest is not 'errno'. While at it, convert a few error messages from a scant perror style to proper failure descriptions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* treewide: Replace perror() calls with calls to logging functionsStefano Brivio2024-06-216-58/+38
| | | | | | | | | | | | perror() prints directly to standard error, but in many cases standard error might be already closed, or we might want to skip logging, based on configuration. Our logging functions provide all that. While at it, make errors more descriptive, replacing some of the existing basic perror-style messages. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* log: Add _perror() logging function variantsStefano Brivio2024-06-212-4/+39
| | | | | | | | | | | | In many places, we have direct perror() calls, which completely bypass logging functions and log files. They are definitely convenient: offer similar convenience with _perror() logging variants, so that we can drop those direct perror() calls. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* log, passt: Always print to stderr before initialisation is completeStefano Brivio2024-06-213-15/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | After commit 15001b39ef1d ("conf: set the log level much earlier"), we had a phase during initialisation when messages wouldn't be printed to standard error anymore. Commit f67238aa864d ("passt, log: Call __openlog() earlier, log to stderr until we detach") fixed that, but only for the case where no log files are given. If a log file is configured, vlogmsg() will not call passt_vsyslog(), but during initialisation, LOG_PERROR is set, so to avoid duplicated prints (which would result from passt_vsyslog() printing to stderr), we don't call fprintf() from vlogmsg() either. This is getting a bit too complicated. Instead of abusing LOG_PERROR, define an internal logging flag that clearly represents that we're not done with the initialisation phase yet. If this flag is not set, make sure we always print to stderr, if the log mask matches. Reported-by: Yalan Zhang <yalzhang@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf, log: Instead of abusing log levels, add log_conf_parsed flagStefano Brivio2024-06-213-10/+10
| | | | | | | | | | | | | | | | | | We currently use a LOG_EMERG log mask to represent the fact that we don't know yet what the mask resulting from configuration should be, before the command line is parsed. However, we have the necessity of representing another phase as well, that is, configuration is parsed but we didn't daemonise yet, or we're not ready for operation yet. The next patch will add that notion explicitly. Mapping these cases to further log levels isn't really practical. Introduce boolean log flags to represent them, instead of abusing log priorities. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf, passt: Make --stderr do nothing, and deprecate itStefano Brivio2024-06-214-29/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original behaviour of printing messages to standard error by default when running from a non-interactive terminal was introduced because the first KubeVirt integration draft used to start passt in foreground and get messages via standard error. For development purposes, the system logger was more convenient at that point, and passt was running from interactive terminals only if not started by the KubeVirt integration. This behaviour was introduced by 84a62b79a2bc ("passt: Also log to stderr, don't fork to background if not interactive"). Later, I added command-line options in 1e49d194d017 ("passt, pasta: Introduce command-line options and port re-mapping") and accidentally reversed this condition, which wasn't a problem as --stderr could force printing to standard error anyway (and it was used by KubeVirt). Nowadays, the KubeVirt integration uses a log file (requested via libvirt configuration), and the same applies for Podman if one actually needs to look at runtime logs. There are no use cases left, as far as I know, where passt runs in foreground in non-interactive terminals. Seize the chance to reintroduce some sanity here. If we fork to background, standard error is closed, so --stderr is useless in that case. If we run in foreground, there's no harm in printing messages to standard error, and that accidentally became the default behaviour anyway, so --stderr is not needed in that case. It would be needed for non-interactive terminals, but there are no use cases, and if there were, let's log to standard error anyway: the user can always redirect standard error to /dev/null if needed. Before we're up and running, we need to print to standard error anyway if something happens, otherwise we can't report failure to start in any kind of usage, stand-alone or in integrations. So, make --stderr do nothing, and deprecate it. While at it, drop a left-over comment about --foreground being the default only for interactive terminals, because it's not the case anymore. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf, passt: Don't try to log to stderr after we close itStefano Brivio2024-06-212-1/+4
| | | | | | | | | | | | If we don't run in foreground, we close standard error as we daemonise, so it makes no sense to check if the controlling terminal is an interactive terminal or if --force-stderr was given, to decide if we want to log to standard error. Make --force-stderr depend on --foreground. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* conf: Accept duplicate and conflicting options, the last one winsStefano Brivio2024-06-212-104/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
* netlink: Strip nexthop identifiers when duplicating routesStefano Brivio2024-06-201-7/+16
| | | | | | | | | | | If routing daemons set up host routes, for example FRR via OSPF as in the reported issue, they might add nexthop identifiers (not objects) that are generally not valid in the target namespace. Strip them off as well, otherwise we'll get EINVAL from the kernel. Link: https://github.com/containers/podman/issues/22960 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* passt.1, qrap.1: align license description with SPDX identifierDanish Prakash2024-06-192-4/+4
| | | | | | | | | | The SPDX identifier states GPL-2.0-or-later but the copyright section mentions GPL-3.0 or later causing a mismatch. Also, only correctly refers to GPL instead of AGPL. Signed-off-by: Danish Prakash <contact@danishpraka.sh> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* netlink: Ignore EHOSTUNREACH failures when duplicating routesStefano Brivio2024-06-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To implicitly resolve possible dependencies between routes as we duplicate them into the target namespace, we go through a set of n routes n times, and ignore EEXIST responses to netlink messages (we already inserted the route) and ENETUNREACH (we didn't insert the route yet, but we need to insert another one first). Until now, we didn't ignore EHOSTUNREACH responses. However, NetworkManager users with multiple non-subnet routes for the same interface report that pasta exits with "no route to host" while duplicating routes. This happens because NetworkManager sets the 'noprefixroute' attribute on addresses, meaning that the kernel won't create subnet routes automatically depending on the prefix length of the address. We copy this attribute as we copy the address into the target namespace, and as a result, the kernel doesn't create subnet routes in the target namespace either. This means that the gateway for routes that are inserted later can be unreachable at some points during the sequence of route duplication. That is, we don't just have dependencies between regular routes, but we can also have dependencies between regular routes and subnet routes, as subnet routes are not automatically inserted in advance. Link: https://github.com/containers/podman/issues/22824 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* netlink: With no default route, pick the first interface with a routeStefano Brivio2024-06-192-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | While commit f919dc7a4b1c ("conf, netlink: Don't require a default route to start") sounded reasonable in the assumption that, if we don't find default routes for a given address family, we can still proceed by selecting an interface with any route *iff it's the only one for that protocol family*, Jelle reported a further issue in a similar setup. There, multiple interfaces are present, and while remote container connectivity doesn't matter for the container, local connectivity is desired. There are no default routes, but those multiple interfaces all have non-default routes, so we should just pick one and start. Pick the first interface reported by the kernel with any route, if there are no default routes. There should be no harm in doing so. Reported-by: Jelle van der Waa <jvanderwaa@redhat.com> Reported-by: Martin Pitt <mpitt@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2277954 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Paul Holzinger <pholzing@redhat.com>
* tcp: Don't rely on bind() to fail to decide that connection target is validStefano Brivio2024-06-191-17/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e1a2e2780c91 ("tcp: Check if connection is local or low RTT was seen before using large MSS") added a call to bind() before we issue a connect() to the target for an outbound connection. If bind() fails, but neither with EADDRNOTAVAIL, nor with EACCESS, we can conclude that the target address is a local (host) address, and we can use an unlimited MSS. While at it, according to the reasoning of that commit, if bind() succeeds, we would know right away that nobody is listening at that (local) address and port, and we don't even need to call connect(): we can just fail early and reset the connection attempt. But if non-local binds are enabled via net.ipv4.ip_nonlocal_bind or net.ipv6.ip_nonlocal_bind sysctl, binding to a non-local address will actually succeed, so we can't rely on it to fail in general. The visible issue with the existing behaviour is that we would reset any outbound connection to non-local addresses, if non-local binds are enabled. Keep the significant optimisation for local addresses along with the bind() call, but if it succeeds, don't draw any conclusion: close the socket, grab another one, and proceed normally. This will incur a small latency penalty if non-local binds are enabled (we'll likely fetch an existing socket from the pool but additionally call close()), or if the target is local but not bound: we'll need to call connect() and get a failure before relaying that failure back. Link: https://github.com/containers/podman/issues/23003 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* siphash: Remove stale prototypesDavid Gibson2024-06-191-6/+0
| | | | | | | | | | | In fc8f0f8c ("siphash: Use incremental rather than all-at-once siphash functions") we removed the older interface to the SipHash implementation, which took fixed sized blocks of data. However, we forgot to remove the prototypes for those functions, so do that now. Fixes: fc8f0f8c48ef ("siphash: Use incremental rather than all-at-once siphash functions") Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Move management of udp[46]_localname into udp_splice_send()David Gibson2024-06-141-5/+4
| | | | | | | | | | | | | Mostly, udp_sock_handler() is independent of how the datagrams it processes will be forwarded (tap or splice). However, it also updates the msg_name fields for spliced sends, which doesn't really make sense here. Move it into udp_splice_send() which is all about spliced sends. This does potentially mean we'll update the field to the same value several times, but we're going to need this in future anyway: with the extensions the flow table allows, it might not be the same value each time after all. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Rework how we divide queued datagrams between sending methodsDavid Gibson2024-06-141-61/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | udp_sock_handler() takes a number of datagrams from sockets that depending on their addresses could be forwarded either to the L2 interface ("tap") or to another socket ("spliced"). In the latter case we can also only send packets together if they have the same source port, and therefore are sent via the same socket. To reduce the total number of system calls we gather contiguous batches of datagrams with the same destination interface and socket where applicable. The determination of what the target is is made by udp_mmh_splice_port(). It returns the source port for splice packets and -1 for "tap" packets. We find batches by looking ahead in our queue until we find a datagram whose "splicefrom" port doesn't match the first in our current batch. udp_mmh_splice_port() is moderately expensive, and unfortunately we can call it twice on the same datagram: once as the (last + 1) entry in one batch (to check it's not in that batch), then again as the first entry in the next batch. Avoid this by keeping track of the "splice port" in the metadata structure, and filling it in one entry ahead of the one we're currently considering. This is a bit subtle, but not that hard. It will also generalise better when we have more complex possibilities based on the flow table. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Fold checking of splice flag into udp_mmh_splice_port()David Gibson2024-06-141-15/+16
| | | | | | | | | | | | | | | | | udp_mmh_splice_port() is used to determine if a UDP datagram can be "spliced" (forwarded via a socket instead of tap). We only invoke it if the origin socket has the 'splice' flag set. Fold the checking of the flag into the helper itself, which makes the caller simpler. It does mean we have a loop looking for a batch of spliceable or non-spliceable packets even in the case where the flag is clear. This shouldn't be that expensive though, since each call to udp_mmh_splice_port() will return without accessing memory in that case. In any case we're going to need a similar loop in more cases with upcoming flow table work. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Split construction of bind socket address from the rest of sock_l4()David Gibson2024-06-141-53/+70
| | | | | | | | | | | | | sock_l4() creates, binds and otherwise prepares a new socket. It builds the socket address to bind from separately provided address and port. However, we have use cases coming up where it's more natural to construct the socket address in the caller. Prepare for this by adding sock_l4_sa() which takes a pre-constructed socket address, and rewriting sock_l4() in terms of it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: use in->buf_size rather than sizeof(pkt_buf)Laurent Vivier2024-06-131-5/+5
| | | | | | | | | | | | buf_size is set to sizeof(pkt_buf) by default. And it seems more correct to provide the actual size of the buffer. Later a buf_size of 0 will allow vhost-user mode to detect guest memory buffers. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* iov: remove iov_copy()Laurent Vivier2024-06-132-42/+0
| | | | | | | | | it was needed by a draft version of vhost-user, it is not needed anymore. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* vhost-user: compare mode MODE_PASTA and not MODE_PASSTLaurent Vivier2024-06-136-21/+21
| | | | | | | | | | As we are going to introduce the MODE_VU that will act like the mode MODE_PASST, compare to MODE_PASTA rather than to add a comparison to MODE_VU when we check for MODE_PASST. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: rename udp_sock_handler() to udp_buf_sock_handler()Laurent Vivier2024-06-133-5/+5
| | | | | | | | | We are going to introduce a variant of the function to use vhost-user buffers rather than passt internal buffers. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: refactor UDP header update functionsLaurent Vivier2024-06-131-26/+34
| | | | | | | | | | | | | | | | | | This commit refactors the udp_update_hdr4() and udp_update_hdr6() functions to improve code portability by replacing the udp_meta_t parameter with more specific parameters for the IPv4 and IPv6 headers (iphdr/ipv6hdr) and the source socket address (sockaddr_in/sockaddr_in6). It also moves the tap_hdr_update() function call inside the udp_tap_send() function not to have to pass the TAP header to udp_update_hdr4() and udp_update_hdr6() This refactor reduces complexity by making the functions more modular and ensuring that each function operates on more narrowly scoped data structures. This will facilitate future backend introduction like vhost-user. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: refactor packets handling functionsLaurent Vivier2024-06-132-49/+64
| | | | | | | | | | | | | Consolidate pool_tap4() and pool_tap6() into tap_flush_pools(), and tap4_handler() and tap6_handler() into tap_handler(). Create a generic tap_add_packet() to consolidate packet addition logic and reduce code duplication. The purpose is to ease the export of these functions to use them with the vhost-user backend. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: move buffers management functions to their own fileLaurent Vivier2024-06-135-550/+654
| | | | | | | | | | | | | | Move all the TCP parts using internal buffers to tcp_buf.c and keep generic TCP management functions in tcp.c. Add tcp_internal.h to export needed functions from tcp.c and tcp_buf.h from tcp_buf.c With this change we can use existing TCP functions with a different kind of memory storage as for instance the shared memory provided by the guest via vhost-user. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: extract buffer management from tcp_send_flag()Laurent Vivier2024-06-131-24/+54
| | | | | | | | | | | | | | | | | This commit isolates the internal data structure management used for storing data (e.g., tcp4_l2_flags_iov[], tcp6_l2_flags_iov[], tcp4_flags_ip[], tcp4_flags[], ...) from the tcp_send_flag() function. The extracted functionality is relocated to a new function named tcp_fill_flag_header(). tcp_fill_flag_header() is now a generic function that accepts parameters such as struct tcphdr and a data pointer. tcp_send_flag() utilizes this parameter to pass memory pointers from tcp4_l2_flags_iov[] and tcp6_l2_flags_iov[]. This separation sets the stage for utilizing tcp_prepare_flags() to set the memory provided by the guest via vhost-user in future developments. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* cppcheck: Suppress constParameterCallback errorsDavid Gibson2024-06-083-0/+3
| | | | | | | | | | | | | | | | | | | | | We have several functions which are used as callbacks for NS_CALL() which only read their void * parameter, they don't write it. The constParameterCallback warning in cppcheck 2.14.1 complains that this parameter could be const void *, also pointing out that that would require casting the function pointer when used as a callback. Casting the function pointers seems substantially uglier than using a non-const void * as the parameter, especially since in each case we cast the void * to a const pointer of specific type immediately. So, suppress these errors. I think it would make logical sense to suppress this globally, but that would cause unmatchedSuppression errors on earlier cppcheck versions. So, instead individually suppress it, along with unmatchedSuppression in the relevant places. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* selinux: Allow access to user_devpts2024_06_07.8a83b53Derek Schrock2024-06-071-0/+1
| | | | | | | | | | | | | | | | | Allow access to user_devpts. $ pasta --version pasta 0^20240510.g7288448-1.fc40.x86_64 ... $ awk '' < /dev/null $ pasta --version $ While this might be a awk bug it appears pasta should still have access to devpts. Signed-off-by: Derek Schrock <dereks@lifeofadishwasher.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, flow: Fix some error paths which didn't clean up flows properlyDavid Gibson2024-06-071-3/+3
| | | | | | | | | | | | | | | | | | | | Flow table entries need to be fully initialised before returning to the main epoll loop. Commit 0060acd1 ("flow: Clarify and enforce flow state transitions") now enforces that: once a flow is allocated we must either cancel it, or activate it before returning to the main loop, or we will hit an ASSERT(). Some error paths in tcp_conn_from_tap() weren't correctly updated for this requirement - we can exit with a flow entry incompletely initialised. Correct that by cancelling the flows in those situations. I don't have enough information to be certain if this is the cause for podman bug 22925, but it plausibly could be. Fixes: 0060acd11b19 ("flow: Clarify and enforce flow state transitions") Link: https://github.com/containers/podman/issues/22925 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Use 'long' to represent millisecond durationsDavid Gibson2024-06-072-2/+2
| | | | | | | | | | timespec_diff_ms() returns an int representing a duration in milliseconds. This will overflow in about 25 days when an int is 32 bits. The way we use this function, we're probably not going to get a result that long, but it's not outrageously implausible. Use a long for safety. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* lineread: Use ssize_t for line lengthsDavid Gibson2024-06-073-10/+9
| | | | | | | | | Functions and structures in lineread.c use plain int to record and report the length of lines we receive. This means we truncate the result from read(2) in some circumstances. Use ssize_t to avoid that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf: Safer parsing of MAC addressesDavid Gibson2024-06-071-17/+36
| | | | | | | | | | | | | | | | | In conf() we parse a MAC address in two places, for the --ns-mac-addr and the -M options. As well as duplicating code, the logic for this parsing has several bugs: * The most serious is that if the given string is shorter than a MAC address should be, we'll access past the end of it. * We don't check the endptr supplied by strtol() which means we could ignore certain erroneous contents * We never check the separator characters between each octet * We ignore certain sorts of garbage that follow the MAC address Correct all these bugs in a new parse_mac() helper. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Use unsigned indices for bits in bitmapsDavid Gibson2024-06-072-7/+7
| | | | | | | | | A negative bit index in a bitmap doesn't make sense. Avoid this by construction by using unsigned indices. While we're there adjust bitmap_isset() to return a bool instead of an int. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* clang-tidy: Enable the bugprone-macro-parentheses checkDavid Gibson2024-06-074-26/+25
| | | | | | | | | | | | | | | | We globally disabled this, with a justification lumped together with several checks about braces. They don't really go together, the others are essentially a stylistic choice which doesn't match our style. Omitting brackets on macro parameters can lead to real and hard to track down bugs if an expression is ever passed to the macro instead of a plain identifier. We've only gotten away with the macros which trigger the warning, because of other conventions its been unlikely to invoke them with anything other than a simple identifier. Fix the macros, and enable the warning for the future. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Remove pointless macro parameters in CALL_PROTO_HANDLERDavid Gibson2024-06-071-3/+3
| | | | | | | | The 'c' parameter is always passed exactly 'c'. The 'now' parameter is always passed exactly 'now'. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Make rport calculation more localDavid Gibson2024-06-071-2/+1
| | | | | | | | | cppcheck 2.14.1 complains about the rport variable not being in as small as scope as it could be. It's also only used once, so we might as well just open code the calculation for it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Make pointer const in tcp_revert_seqDavid Gibson2024-06-071-1/+1
| | | | | | | | | The th pointer could be const, which causes a cppcheck warning on at least some cppcheck versions (e.g. Cppcheck 2.13.0 in Fedora 40). Fixes: e84a01e94c9f ("tcp: move seq_to_tap update to when frame is queued") Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* log: Remove log_to_stdout optionDavid Gibson2024-06-052-6/+3
| | | | | | | | Now that we've simplified how usage() works, nothing ever sets the log_to_stdout flag. Eliminate it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf: Don't print usage via the logging subsystemDavid Gibson2024-06-051-160/+166
| | | | | | | | | | | | | | | | | | | | | | The message from usage() when given invalid options, or the -h / --help option is currently printed by many calls to the info() function, also used for runtime logging of informational messages. That isn't useful: the usage message should always go to the terminal (stdout or stderr), never syslog or a logfile. It should never be filtered by priority. Really the only thing using the common logging functions does is give more opportunities for something to go wrong. Replace all the info() calls with direct fprintf() calls. This does mean manually adding "\n" to each message. A little messy, but worth it for the simplicity in other dimensions. While we're there make much heavier use of single strings containing multiple lines of output text. That reduces the number of fprintf calls, reducing visual clutter and making it easier to see what the output will look like from the source. Link: https://bugs.passt.top/show_bug.cgi?id=90 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf: Remove unhelpful usage() wrapperDavid Gibson2024-06-051-13/+4
| | | | | | | | | usage() does nothing but call print_usage() with EXIT_FAILURE as a parameter. It's no more complex to just give that parameter at the single call site. Eliminate it and rename print_usage() to just usage(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: move seq_to_tap update to when frame is queuedJon Maloy2024-06-051-22/+39
| | | | | | | | | | | | | | | | | | | | | | | | commit a469fc393fa1 ("tcp, tap: Don't increase tap-side sequence counter for dropped frames") delayed update of conn->seq_to_tap until the moment the corresponding frame has been successfully pushed out. This has the advantage that we immediately can make a new attempt to transmit a frame after a failed trasnmit, rather than waiting for the peer to later discover a gap and trigger the fast retransmit mechanism to solve the problem. This approach has turned out to cause a problem with spurious sequence number updates during peer-initiated retransmits, and we have realized it may not be the best way to solve the above issue. We now restore the previous method, by updating the said field at the moment a frame is added to the outqueue. To retain the advantage of having a quick re-attempt based on local failure detection, we now scan through the part of the outqueue that had do be dropped, and restore the sequence counter for each affected connection to the most appropriate value. Signed-off-by: Jon Maloy <jmaloy@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 13:19:16 +0000