aboutgitcodebugslistschat
Commit message (Collapse)AuthorAgeFilesLines
* selinux: Drop user_namespace class rules for Fedora 37Stefano Brivio2023-11-072-4/+0
| | | | | | | | | | | | | With current selinux-policy-37.22-1.fc37.noarch, and presumably any future update for Fedora 37, the user_namespace class is not available, so statements using it prevent the policy from being loaded. If a class is not defined in the base policy, any related permission is assumed to be enabled, so we can safely drop those. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2237996 Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* dhcp: put option 53 at the beginning2023_10_04.f851084Stas Sergeev2023-10-041-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ... unless it is listed in 55. Many clients expect option 53 at the beginning. mTCP has this code: if ( resp->options[0] != 53 ) { TRACE_WARN(( "Dhcp: first option was not a Dhcp msg type\n" )); return; } wattcp32 has this: static int DHCP_is_ack (void) { const BYTE *opt = (const BYTE*) &dhcp_in.dh_opt[4]; return (opt[0] == DHCP_OPT_MSG_TYPE && opt[1] == 1 && opt[2] == DHCP_ACK); } static int DHCP_is_nack (void) { const BYTE *opt = (const BYTE*) &dhcp_in.dh_opt[4]; return (opt[0] == DHCP_OPT_MSG_TYPE && opt[1] == 1 && opt[2] == DHCP_NAK); } Link: https://bugs.passt.top/show_bug.cgi?id=77 Signed-off-by: Stas Sergeev <stsp2@yandex.ru> [sbrivio: s/options 53/option 53/ and s/other/others/ in comment] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tap: Don't increase tap-side sequence counter for dropped framesStefano Brivio2023-10-043-10/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | ...so that we'll retry sending them, instead of more-or-less silently dropping them. This happens quite frequently if our sending buffer on the UNIX domain socket is heavily constrained (for instance, by the 208 KiB default memory limit). It might be argued that dropping frames is part of the expected TCP flow: we don't dequeue those from the socket anyway, so we'll eventually retransmit them. But we don't need the receiver to tell us (by the way of duplicate or missing ACKs) that we couldn't send them: we already know as sendmsg() reports that. This seems to considerably increase throughput stability and throughput itself for TCP connections with default wmem_max values. Unfortunately, the 16 bits left as padding in the frame descriptors we use internally aren't enough to uniquely identify for which connection we should update sequence numbers: create a parallel array of pointers to sequence numbers and L4 lengths, of TCP_FRAMES_MEM size, and go through it after calling sendmsg(). Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flagStefano Brivio2023-10-041-5/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It looks like we need it as workaround for this situation, readily reproducible at least with a 6.5 Linux kernel, with default rmem_max and wmem_max values: - an iperf3 client on the host sends about 160 KiB, typically segmented into five frames by passt. We read this data using MSG_PEEK - the iperf3 server on the guest starts receiving - meanwhile, the host kernel advertised a zero-sized window to the sender, as expected - eventually, the guest acknowledges all the data sent so far, and we drop it from the buffer, courtesy of tcp_sock_consume(), using recv() with MSG_TRUNC - the client, however, doesn't get an updated window value, and even keepalive packets are answered with zero-window segments, until the connection is closed It looks like dropping data from a socket using MSG_TRUNC doesn't cause a recalculation of the window, which would be expected as a result of any receiving operation that invalidates data on a buffer (that is, not with MSG_PEEK). Strangely enough, setting TCP_WINDOW_CLAMP via setsockopt(), even to the previous value we clamped to, forces a recalculation of the window which is advertised to the sender. I couldn't quite confirm this issue by following all the possible code paths in the kernel, yet. If confirmed, this should be fixed in the kernel, but meanwhile this workaround looks robust to me (and it will be needed for backward compatibility anyway). Reported-by: Matej Hrica <mhrica@redhat.com> Link: https://bugs.passt.top/show_bug.cgi?id=74 Analysed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* tcp: Fix comment to tcp_sock_consume()Stefano Brivio2023-10-041-1/+1
| | | | | | | | | Note that tcp_sock_consume() doesn't update ACK sequence counters anymore. Fixes: cc6d8286d104 ("tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* cppcheck: Work around bug in cppcheck 2.12.0David Gibson2023-10-041-0/+7
| | | | | | | | | cppcheck 2.12.0 (and maybe some other versions) things this if condition is always true, which is demonstrably not true. Work around the bug for now. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* cppcheck: Use "exhaustive" level checking when availableDavid Gibson2023-10-041-0/+6
| | | | | | | | | | | | | | Recent enough cppcheck versions (at least as of cppcheck 2.12) give this error processing conf.c: conf.c:1179:1: information: ValueFlow analysis is limited in conf. Use --check-level=exhaustive if full analysis is wanted. [checkLevelNormal] Adding --check-level=exhaustive doesn't seem to significantly increase the cppcheck run time for us, so enable it when possible, suppressing that warning. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf: Remove overly cryptic selection of forward tableDavid Gibson2023-10-041-12/+8
| | | | | | | | | | | | | | | | In a couple of places in conf(), we use a local 'fwd' variable to reference one of our forwarding tables. The value depends on which command line option we're currently looking at, and is initialized rather cryptically from an assignment side-effect within the if condition checking that option. Newer versions of cppcheck complain about this assignment being an always true condition, but in any case it's both clearer and slightly shorter to use separate if branches for the two cases and set the forwarding parameter more directly. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* cppcheck: Make many pointers constDavid Gibson2023-10-0418-46/+50
| | | | | | | | | Newer versions of cppcheck (as of 2.12.0, at least) added a warning for pointers which could be declared to point at const data, but aren't. Based on that, make many pointers throughout the codebase const. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* siphash: Use incremental rather than all-at-once siphash functionsDavid Gibson2023-09-305-145/+28
| | | | | | | | | | | | | | | | | | We have a bunch of variants of the siphash functions for different data sizes. The callers, in tcp.c, need to pack the various values they want to hash into a temporary structure, then call the appropriate version. We can avoid the copy into the temporary by directly using the incremental siphash functions. The length specific hash functions also have an undocumented constraint that the data pointer they take must, in fact, be aligned to avoid unaligned accesses, which may cause crashes on some architectures. So, prefer the incremental approach and remove the length-specific functions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* siphash, checksum: Move TBAA explanation to checksum.cDavid Gibson2023-09-302-19/+19
| | | | | | | | | | | | A number of checksum and hash functions require workarounds for the odd behaviour of Type-Baased Alias Analysis. We have a detailed comment about this on siphash_8b() and other functions reference that. Move the main comment to csume_16b() instead, because we're going to reorganise things in siphash.c. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* siphash: Make internal helpers publicDavid Gibson2023-09-302-106/+111
| | | | | | | | | Move a bunch of code from siphash.c to siphash.h, making it available to other modules. This will allow places which need hashes of more complex objects to construct them incrementally. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* siphash: Use specific structure for internal stateDavid Gibson2023-09-301-38/+42
| | | | | | | | To improve type safety, encapsulate the internal state of the SipHash algorithm into a dedicated structure type. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* siphash: Use more hygienic state initialiserDavid Gibson2023-09-301-17/+12
| | | | | | | | | | The PREAMBLE macro sets up the SipHash initial internal state. It also defines that state as a variable, which isn't macro hygeinic. With previous changes simplifying this premable, it's now possible to replace it with a macro which simply expands to a C initialisedrfor that state. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* siphash: Fix bug in state initialisationDavid Gibson2023-09-301-1/+1
| | | | | | | | | | | | | The SipHash algorithm starts with initializing the 32 bytes of internal state with some magic numbers XORed with the hash key. However, our implementation has a bug - rather than XORing the hash key, it *sets* the initial state to copies of the key. I don't know if that affects any of the cryptographic properties of SipHash but it's not what we should be doing. Fix it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* siphash: Clean up hash finalisation with posthash_final() functionDavid Gibson2023-09-301-30/+28
| | | | | | | | | | | | | | | | | | | | | The POSTAMBLE macro implements the finalisation steps of SipHash. It relies on some variables in the environment, including returning the final hash value that way. That isn't great hygeine. In addition the PREAMBLE macro takes a length parameter which is used only to initialize the 'b' value that's not used until the finalisation and is also sometimes modified in a non-obvious way by the callers. The 'b' value is always composed from the total length of the hash input plus up to 7 bytes of "tail" data - that is the remainder of the hash input after a multiple of 8 bytes has been consumed. Simplify all this by replacing the POSTAMBLE macro with a siphash_final() function which takes the length and tail data as parameters and returns the final hash value. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* siphash: Add siphash_feed() helperDavid Gibson2023-09-301-31/+21
| | | | | | | | | | | | | We have macros or inlines for a number of common operations in the siphash functions. However, in a number of places we still open code feeding another 64-bits of data into the hash function: an xor, followed by 2 rounds of shuffling, followed by another xor. Implement an inline function for this, which results in somewhat shortened code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* siphash: Make sip round calculations an inline function rather than macroDavid Gibson2023-09-301-22/+29
| | | | | | | | | The SIPROUND(n) macro implements n rounds of SipHash shuffling. It relies on 'v' and '__i' variables being available in the context it's used in which isn't great hygeine. Replace it with an inline function instead. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* siphash: Make siphash functions consistently return 64-bit resultsDavid Gibson2023-09-303-16/+14
| | | | | | | | | | | | | | Some of the siphas_*b() functions return 64-bit results, others 32-bit results, with no obvious pattern. siphash_32b() also appears to do this incorrectly - taking the 64-bit hash value and simply returning it truncated, rather than folding the two halves together. Since SipHash proper is defined to give a 64-bit hash, make all of them return 64-bit results. In the one caller which needs a 32-bit value, tcp_seq_init() do the fold down to 32-bits ourselves. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Consolidate and improve workarounds for clang-tidy issue 58992David Gibson2023-09-274-13/+43
| | | | | | | | | | | | | | | | | | | | | We have several workarounds for a clang-tidy bug where the checker doesn't recognize that a number of system calls write to - and therefore initialise - a socket address. We can't neatly use a suppression, because the bogus warning shows up some time after the actual system call, when we access a field of the socket address which clang-tidy erroneously thinks is uninitialised. Consolidate these workarounds into one place by using macros to implement wrappers around affected system calls which add a memset() of the sockaddr to silence clang-tidy. This removes the need for the individual memset() workarounds at the callers - and the somewhat longwinded explanatory comments. We can then use a #define to not include the hack in "real" builds, but only consider it for clang-tidy. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Avoid shadowing index(3)David Gibson2023-09-276-35/+35
| | | | | | | | | | | | | | | | | A classic gotcha of the standard C library is that its unwise to call any variable 'index' because it will shadow the standard string library function index(3). This can cause warnings from cppcheck amongst others, and it also means that if the variable is removed you tend to get confusing type errors (or sometimes nothing at all) instead of a nice simple "name is not defined" error. Strictly speaking this only occurs if <string.h> is included, but that is so common that as a rule it's best to just avoid it always. We have a number of places which hit this trap, so rename variables and parameters to avoid it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Always send an ACK segment once the handshake is completedStefano Brivio2023-09-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reporter is running a SMTP server behind pasta, and the client waits for the server's banner before sending any data. In turn, the server waits for our ACK after sending SYN,ACK, which never comes. If we use the ACK_IF_NEEDED indication to tcp_send_flag(), given that there's no pending data, we delay sending the ACK segment at the end of the three-way handshake until we have some data to send to the server. This was actually intended, as I thought we would lower the latency for new connections, but we can't assume that the client will start sending data first (SMTP is the typical example where this doesn't happen). And, trying out this patch with SSH (where the client starts sending data first), the reporter actually noticed we have a lower latency by forcing an ACK right away. Comparing a capture before the patch: 13:07:14.007704 IP 10.1.2.1.42056 > 10.1.2.140.1234: Flags [S], seq 1797034836, win 65535, options [mss 4096,nop,wscale 7], length 0 13:07:14.007769 IP 10.1.2.140.1234 > 10.1.2.1.42056: Flags [S.], seq 2297052481, ack 1797034837, win 65480, options [mss 65480,nop,wscale 7], length 0 13:07:14.008462 IP 10.1.2.1.42056 > 10.1.2.140.1234: Flags [.], seq 1:22, ack 1, win 65535, length 21 13:07:14.008496 IP 10.1.2.140.1234 > 10.1.2.1.42056: Flags [.], ack 22, win 512, length 0 13:07:14.011799 IP 10.1.2.140.1234 > 10.1.2.1.42056: Flags [P.], seq 1:515, ack 22, win 512, length 514 and after: 13:10:26.165364 IP 10.1.2.1.59508 > 10.1.2.140.1234: Flags [S], seq 4165939595, win 65535, options [mss 4096,nop,wscale 7], length 0 13:10:26.165391 IP 10.1.2.140.1234 > 10.1.2.1.59508: Flags [S.], seq 985607380, ack 4165939596, win 65480, options [mss 65480,nop,wscale 7], length 0 13:10:26.165418 IP 10.1.2.1.59508 > 10.1.2.140.1234: Flags [.], ack 1, win 512, length 0 13:10:26.165683 IP 10.1.2.1.59508 > 10.1.2.140.1234: Flags [.], seq 1:22, ack 1, win 512, length 21 13:10:26.165698 IP 10.1.2.140.1234 > 10.1.2.1.59508: Flags [.], ack 22, win 512, length 0 13:10:26.167107 IP 10.1.2.140.1234 > 10.1.2.1.59508: Flags [P.], seq 1:515, ack 22, win 512, length 514 the latency between the initial SYN segment and the first data transmission actually decreases from 792µs to 334µs. This is not statistically relevant as we have a single measurement, but it can't be that bad, either. Reported-by: cr3bs (from IRC) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* dhcp: Actually note down the length of options received by the clientStefano Brivio2023-09-271-0/+1
| | | | | | | | | | | | | | | It turns out we never used 'clen' until commit 1f24d3efb499 ("dhcp: support BOOTP clients"), and we always ignored option 55 (Parameter Request List), while, according to RFC 2132, we MUST try to insert the requested options in the order requested by the client. The commit mentioned above made this visible because now every client is reported as sending a DHCPREQUEST as an old BOOTP client, based on the lack of option 53 (that is, zero length). Fixes: b439984641ed ("merd: ARP and DHCP handlers, connection tracking fixes") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* dhcpv6: Properly separate domain names in search listStefano Brivio2023-09-271-7/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To prepare the DHCPv6 domain search list option, we go over the flattened list of domains, and replace both dots and zero bytes with a counter of bytes in the next label, implementing the encoding specified by section 3.1 of RFC 1035. If there are multiple domains in the list, however, zero bytes serve as markers for the end of a domain name, and we'll replace them with the length of the first label of the next domain, plus one. This is wrong. We should only convert the dots before the labels. To distinguish between label separators and domain names separators, for simplicity, introduce a dot before the first label of every domain we copy to form the list. All dots are then replaced by label lengths, and separators (zero bytes) remain as they are. As we do this, we need to make sure we don't replace the trailing dot, if present: that's already a separator. Skip copying it, and just add separators as needed. Now that we don't copy those, though, we might end up with zero-length domains: skip them, as they're meaningless anyway. And as we might skip domains, we can't use the index 'i' to check if we're at the beginning of the option -- use 'srch' instead. This is very similar to how we prepare the list for NDP option 31, except that we don't need padding (RFC 8106, 5.2) here, and we should refactor this into common functions, but it probably makes sense to rework the NDP responder (https://bugs.passt.top/show_bug.cgi?id=21) first. Reported-by: Sebastian Mitterle <smitterl@redhat.com> Link: https://bugs.passt.top/show_bug.cgi?id=75 Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Fix licensing information display in --version2023_09_08.05627dcStefano Brivio2023-09-081-2/+2
| | | | | | | The regular expression I used when relicensing to GPLv2+ missed this. Fixes: ca2749e1bd52 ("passt: Relicense to GPL 2.0, or any later version") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Correct handling of FIN,ACK followed by SYNDavid Gibson2023-09-081-1/+1
| | | | | | | | | | | | | | | | | | | | When the guest tries to establish a connection, it could give up on it by sending a FIN,ACK instead of a plain ACK to our SYN,ACK. It could then make a new attempt to establish a connection with the same addresses and ports with a new SYN. Although it's unlikely, it could send the 2nd SYN very shortly after the FIN,ACK resulting in both being received in the same batch of packets from the tap interface. Currently, we don't handle that correctly, when we receive a FIN,ACK on a not fully established connection we discard the remaining packets in the batch, and so will never process the 2nd SYN. Correct this by returning 1 from tcp_tap_handler() in this case, so we'll just consume the FIN,ACK and continue to process the rest of the batch. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Consolidate paths where we initiate reset on tap interfaceDavid Gibson2023-09-081-22/+25
| | | | | | | | | | | | | | | | | | | There are a number of conditions where we will issue a TCP RST in response to something unexpected we received from the tap interface. These occur in both tcp_data_from_tap() and tcp_tap_handler(). In tcp_tap_handler() use a 'goto out of line' technique to consolidate all these paths into one place. For the tcp_data_from_tap() cases use a negative return code and direct that to the same path in tcp_tap_handler(), its caller. In this case we want to discard all remaining packets in the batch we have received: even if they're otherwise good, they'll be invalidated when the guest receives the RST we're sending. This is subtly different from the case where we *receive* an RST, where we could in theory get a new SYN immediately afterwards. Clarify that with a common on the now common reset path. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Correctly handle RST followed rapidly by SYNDavid Gibson2023-09-081-2/+2
| | | | | | | | | | | | | | | | | Although it's unlikely in practice, the guest could theoretically reset one TCP connection then immediately start a new one with the same addressses and ports, such that we get an RST then a SYN in the same batch of received packets in tcp_tap_handler(). We don't correctly handle that unlikely case, because when we receive the RST, we discard any remaining packets in the batch so we'd never see the SYN. This could happen in either tcp_tap_handler() or tcp_data_from_tap(). Correct that by returning 1, so that the caller will continue calling tcp_tap_handler() on subsequent packets allowing us to process any subsequent SYN. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Return consumed packet count from tcp_data_from_tap()David Gibson2023-09-081-10/+15
| | | | | | | | | | Currently tcp_data_from_tap() is assumed to consume all packets remaining in the packet pool it is given. However there are some edge cases where that's not correct. In preparation for fixing those, change it to return a count of packets consumed and use that in its caller. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Never hash match closed connectionsDavid Gibson2023-09-081-1/+1
| | | | | | | | | | | | | | | >From a practical point of view, when a TCP connection ends, whether by FIN or by RST, we set the CLOSED event, then some time later we remove the connection from the hash table and clean it up. However, from a protocol point of view, once it's closed, it's gone, and any new packets with matching addresses and ports are either forming a new connection, or are invalid packets to discard. Enforce these semantics in the TCP hash logic by never hash matching closed connections. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Remove some redundant packet_get() operationsDavid Gibson2023-09-081-10/+4
| | | | | | | | | | | | Both tcp_data_from_tap() and tcp_tap_handler() call packet_get() to get the entire L4 packet length, then immediately call it again to check that the packet is long enough to include a TCP header. The features of packet_get() let us easily combine these together, we just need to adjust the length slightly, because we want the value to include the TCP header length. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp, tap: Correctly advance through packets in udp_tap_handler()David Gibson2023-09-083-20/+17
| | | | | | | | | | | | | | | | | | In both tap4_handler() and tap6_handler(), once we've sorted incoming l3 packets into "sequences", we then step through all the packets in each DUP sequence calling udp_tap_handler(). Or so it appears. In fact, udp_tap_handler() doesn't take an index and always starts with packet 0 of the sequence, even if called repeatedly. It appears to be written with the idea that the struct pool is a queue, from which it consumes packets as it processes them, but that's not how the pool data structure works. Correct this by adding an index parameter to udp_tap_handler() and altering the loops in tap.c to step through the pool properly. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tap: Correctly advance through packets in tcp_tap_handler()David Gibson2023-09-083-22/+33
| | | | | | | | | | | | | | | | | | | | | | | | | In both tap4_handler() and tap6_handler(), once we've sorted incoming l3 packets into "sequences", we then step through all the packets in each TCP sequence calling tcp_tap_handler(). Or so it appears. In fact, tcp_tap_handler() doesn't take an index and always looks at packet 0 of the sequence, except when it calls tcp_data_from_tap() to process data packets. It appears to be written with the idea that the struct pool is a queue, from which it consumes packets as it processes them, but that's not how the pool data structure works - they are more like an array of packets. We only get away with this, because setup packets for TCP tend to come in separate batches (because we need to reply in between) and so we only get a bunch of packets for the same connection together when they're data packets (tcp_data_from_tap() has its own loop through packets). Correct this by adding an index parameter to tcp_tap_handler() and altering the loops in tap.c to step through the pool properly. Link: https://bugs.passt.top/show_bug.cgi?id=68 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Add Podman system test with bats for pasta2023_09_07.ee58f37Stefano Brivio2023-09-073-2/+27
| | | | | | | | | | | | | | | | | | | Ugly as hell, but we keep breaking things otherwise, and I keep forgetting to run this manually (as long as it's based on my local Podman setup, that's the only alternative). We need to clone the Podman repository as distribution packages don't contain test scripts, typically. While at it, build the latest version which is what really matters. As we're planning anyway to revamp the test framework, I'd be inclined to just add this without too many thoughts, and have it as a nice-to-have requirement reminder for the new framework. Link: https://github.com/containers/podman/pull/19699 Suggested-by: Paul Holzinger <pholzing@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* dhcp: support BOOTP clientsStas Sergeev2023-09-071-2/+2
| | | | | | | | | | BOOTP clients do not use tagged messages for requests. As such, any message without the DHCP option 53, should be considered a BOOTP request. Link: https://bugs.passt.top/show_bug.cgi?id=72 Signed-off-by: Stas Sergeev <stsp2@yandex.ru> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: fix uses of l3_len in tap4_handler()Stas Sergeev2023-09-071-2/+2
| | | | | | | | | | | | | | | | | l3_len was calculated from the ethernet frame size, and it was assumed to be equal to the length stored in an IP packet. But if the ethernet frame is padded, then l3_len calculated that way can only be used as a bound check to validate the length stored in an IP header. It should not be used for calculating the l4_len. This patch makes sure the small padded ethernet frames are properly processed, by trusting the length stored in an IP header. Link: https://bugs.passt.top/show_bug.cgi?id=73 Signed-off-by: Stas Sergeev <stsp2@yandex.ru> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* fedora: Replace pasta hard links by separate buildsStefano Brivio2023-09-071-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | | The hard link trick didn't actually fix the issue with SELinux file contexts properly: as opposed to symbolic links, SELinux now correctly associates types to the labels that are set -- except that those labels are now shared, so we can end up (depending on how rpm(8) extracts the archives) with /usr/bin/passt having a pasta_exec_t context. This got rather confusing as running restorecon(8) seemed to fix up labels -- but that's simply toggling between passt_exec_t and pasta_exec_t for both links, because each invocation will just "fix" the file with the mismatching context. Replace the hard links with two separate builds of the binary, as suggested by David. The build is reproducible, so we pass "-pasta" in the VERSION for pasta's build. This is wasteful but better than the alternative. Just copying the binary over would otherwise cause issues with debuginfo packages due to duplicate Build-IDs -- and rpmbuild(8) also warns about them. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* apparmor: Add pasta's own profileStefano Brivio2023-09-073-10/+31
| | | | | | | | | | | | | | | | | | | If pasta and pasta.avx2 are hard links to passt and passt.avx2, AppArmor will attach their own profiles on execution, and we can restrict passt's profile to what it actually needs. Note that pasta needs to access all the resources that passt needs, so the pasta abstraction still includes passt's one. I plan to push the adaptation required for the Debian package in commit 5bb812e79143 ("debian/rules: Override pasta symbolic links with hard links"), on Salsa. If other distributions need to support AppArmor profiles they can follow a similar approach. The profile itself will be installed, there, via dh_apparmor, in a separate commit, b52557fedcb1 ("debian/rules: Install new pasta profile using dh_apparmor"). Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* apparmor: Allow pasta to remount /proc, access entries under its own copyStefano Brivio2023-09-071-0/+7
| | | | | | | | | | Since commit b0e450aa8500 ("pasta: Detach mount namespace, (re)mount procfs before spawning command"), we need to explicitly permit mount of /proc, and access to entries under /proc/PID/net (after remount, that's what AppArmor sees as path). Fixes: b0e450aa8500 ("pasta: Detach mount namespace, (re)mount procfs before spawning command") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* apparmor: Allow read-only access to uid_mapStefano Brivio2023-09-071-0/+2
| | | | | | | | | | | | | | Starting with commit 770d1a4502dd ("isolation: Initially Keep CAP_SETFCAP if running as UID 0 in non-init"), the lack of this rule became more apparent as pasta needs to access uid_map in procfs even as non-root. However, both passt and pasta needs this, in case they are started as root, so add this directly to passt's abstraction (which is sourced by pasta's profile too). Fixes: 770d1a4502dd ("isolation: Initially Keep CAP_SETFCAP if running as UID 0 in non-init") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* apparmor: Explicitly pass options we use while remounting root filesystemStefano Brivio2023-09-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | As a result of AppArmor commit d4b0fef10a4a ("parser: fix rule flag generation change_mount type rules"), we can't expect anymore to get permission to mount() / read-write, with MS_REC | MS_UNBINDABLE ("runbindable", in AppArmor terms), if we don't explicitly pass those flags as options. It used to work by mistake. Now, the reasonable expectation would be that we could just change the existing rule into: mount options=(rw, runbindable) "" -> /, ...but this now fails to load too, I think as a result of AppArmor commit 9d3f8c6cc05d ("parser: fix parsing of source as mount point for propagation type flags"). It works with 'rw' alone, but 'runbindable' is indeed a propagation type flag. Skip the source specification, it doesn't add anything meaningful to the rule anyway. Reported-by: Paul Holzinger <pholzing@redhat.com> Link: https://github.com/containers/podman/pull/19751 Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* apparmor: Use abstractions/nameservice to deal with symlinked resolv.confStefano Brivio2023-09-061-2/+1
| | | | | | | | | | | | | While abstractions/nameservice appeared too broad and overkill for our simple need (read-only resolv.conf access), it properly deals with symlinked resolv.conf files generated by systemd-resolved, NetworkManager or suchlike. If we just grant read-only access to /etc/resolv.conf, we'll fail to read nameserver information in rather common configurations, because AppArmor won't follow the symlink. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* pasta: Strip RTA_PREFSRC when copying routes to the namespace2023_08_23.a7e4bfbDavid Gibson2023-08-231-1/+14
| | | | | | | | | | | | | | | | | | | | | Host routes can include a preferred source address (RTA_PREFSRC), which must be one of the host's addresses. However when using pasta with -a the namespace might be given a different address, not on the host. This seems to occur pretty routinely depending on the network configuration systems in place on the host. With --config-net we will try to copy host routes to the namespace. If one of those includes an RTA_PREFSRC, but the namespace doesn't have the host address, this will fail with -EINVAL, causing pasta to fail. Fix this by stripping off RTA_PREFSRC attributes from routes as we copy them to the namespace. This is by no means infallible, bit it should at least handle common cases for the time being. Link: https://bugs.passt.top/show_bug.cgi?id=71 Link: https://github.com/containers/podman/pull/19699#issuecomment-1688769287 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* netlink: Set IFA_ADDRESS, not just IFA_LOCAL, while adding IPv4 addressesStefano Brivio2023-08-231-0/+1
| | | | | | | | | Otherwise, we actually configure the address, but it's not usable because no local route is added by the kernel. Link: https://github.com/containers/podman/pull/19699 Fixes: cfe7509e5c16 ("netlink: Use struct in_addr for IPv4 addresses, not bare uint32_t") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Remove broken pressure calculations for tcp_defer_handler()David Gibson2023-08-223-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | tcp_defer_handler() performs a potentially expensive linear scan of the connection table. So, to mitigate the cost of that we skip if if we're not under at least moderate pressure: either 30% of available connections or 30% (estimated) of available fds used. But, the calculation for this has been broken since it was introduced: we calculate "max_conns" based on c->tcp.conn_count, not TCP_MAX_CONNS, meaning we only exit early if conn_count is less than 30% of itself, i.e. never. If that calculation is "corrected" to be based on TCP_MAX_CONNS, it completely tanks the TCP CRR times for passt - from ~60ms to >1000ms on my laptop. My guess is that this is because in the case of many short lived connections, we're letting the table become much fuller before compacting it. That means that other places which perform a table scan now have to do much, much more. For the time being, simply remove the tests, since they're not doing anything useful. We can reintroduce them more carefully if we see a need for them. This also removes the only user of c->tcp.splice_conn_count, so that can be removed as well. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* inany: Add missing double include guard to inany.hDavid Gibson2023-08-221-0/+5
| | | | | | | This was overlooked when the file was created. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Move in_epoll flag out of common connection structureDavid Gibson2023-08-223-7/+9
| | | | | | | | | | | | | | | | | | | The in_epoll boolean is one of only two fields (currently) in the common structure shared between tap and spliced connections. It seems like it belongs there, because both tap and spliced connections use it, and it has roughly the same meaning. Roughly, however, isn't exactly: which fds this flag says are in the epoll varies between the two connection types, and are in type specific fields. So, it's only possible to meaningfully use this value locally in type specific code anyway. This common field is going to get in the way of more widespread generalisation of connection / flow tracking, so move it to separate fields in the tap and splice specific structures. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, udp: Don't pre-fill IPv4 destination address in headersDavid Gibson2023-08-228-32/+15
| | | | | | | | | | | | | | | | | Because packets sent on the tap interface will always be going to the guest/namespace, we more-or-less know what address they'll be going to. So we pre-fill this destination address in our header buffers for IPv4. We can't do the same for IPv6 because we could need either the global or link-local address for the guest. In future we're going to want more flexibility for the destination address, so this pre-filling will get in the way. Change the flow so we always fill in the IPv4 destination address for each packet, rather than prefilling it from proto_update_l2_buf(). In fact for TCP we already redundantly filled the destination for each packet anyway. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, udp: Don't include destination address in partially precomputed csumsDavid Gibson2023-08-223-52/+27
| | | | | | | | | | | | | | | | | | | | | | We partially prepopulate IP and TCP header structures including, amongst other things the destination address, which for IPv4 is always the known address of the guest/namespace. We partially precompute both the IPv4 header checksum and the TCP checksum based on this. In future we're going to want more flexibility with controlling the destination for IPv4 (as we already do for IPv6), so this precomputed value gets in the way. Therefore remove the IPv4 destination from the precomputed checksum and fold it into the checksum update when we actually send a packet. Doing this means we no longer need to recompute those partial sums when the destination address changes ({tcp,udp}_update_l2_buf()) and instead the computation can be moved to compile time. This means while we perform slightly more computations on each packet, we slightly reduce the amount of memory we need to access. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Consistent usage of ports in tcp_seq_init()David Gibson2023-08-221-2/+2
| | | | | | | | | | | | | | | In tcp_seq_init() the meaning of "src" and "dst" isn't really clear since it's used for connections in both directions. However, these values are just feeding a hash, so as long as we're consistent and include all the information we want, it doesn't really matter. Oddly, for the "src" side we supply the (tap side) forwarding address but the (tap side) endpoint port. This again doesn't really matter, but it's confusing. So swap this with dstport, so "src" is always forwarding and "dst" is always endpoint. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 06:39:23 +0000