| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Host routes can include a preferred source address (RTA_PREFSRC), which
must be one of the host's addresses. However when using pasta with -a the
namespace might be given a different address, not on the host. This seems
to occur pretty routinely depending on the network configuration systems
in place on the host.
With --config-net we will try to copy host routes to the namespace. If
one of those includes an RTA_PREFSRC, but the namespace doesn't have the
host address, this will fail with -EINVAL, causing pasta to fail.
Fix this by stripping off RTA_PREFSRC attributes from routes as we copy
them to the namespace. This is by no means infallible, bit it should at
least handle common cases for the time being.
Link: https://bugs.passt.top/show_bug.cgi?id=71
Link: https://github.com/containers/podman/pull/19699#issuecomment-1688769287
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Otherwise, we actually configure the address, but it's not usable
because no local route is added by the kernel.
Link: https://github.com/containers/podman/pull/19699
Fixes: cfe7509e5c16 ("netlink: Use struct in_addr for IPv4 addresses, not bare uint32_t")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
tcp_defer_handler() performs a potentially expensive linear scan of the
connection table. So, to mitigate the cost of that we skip if if we're not
under at least moderate pressure: either 30% of available connections or
30% (estimated) of available fds used.
But, the calculation for this has been broken since it was introduced: we
calculate "max_conns" based on c->tcp.conn_count, not TCP_MAX_CONNS,
meaning we only exit early if conn_count is less than 30% of itself, i.e.
never.
If that calculation is "corrected" to be based on TCP_MAX_CONNS, it
completely tanks the TCP CRR times for passt - from ~60ms to >1000ms on my
laptop. My guess is that this is because in the case of many short lived
connections, we're letting the table become much fuller before compacting
it. That means that other places which perform a table scan now have to
do much, much more.
For the time being, simply remove the tests, since they're not doing
anything useful. We can reintroduce them more carefully if we see a need
for them.
This also removes the only user of c->tcp.splice_conn_count, so that can
be removed as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
| |
This was overlooked when the file was created.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The in_epoll boolean is one of only two fields (currently) in the common
structure shared between tap and spliced connections. It seems like it
belongs there, because both tap and spliced connections use it, and it has
roughly the same meaning.
Roughly, however, isn't exactly: which fds this flag says are in the epoll
varies between the two connection types, and are in type specific fields.
So, it's only possible to meaningfully use this value locally in type
specific code anyway.
This common field is going to get in the way of more widespread
generalisation of connection / flow tracking, so move it to separate fields
in the tap and splice specific structures.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Because packets sent on the tap interface will always be going to the
guest/namespace, we more-or-less know what address they'll be going to. So
we pre-fill this destination address in our header buffers for IPv4. We
can't do the same for IPv6 because we could need either the global or
link-local address for the guest. In future we're going to want more
flexibility for the destination address, so this pre-filling will get in
the way.
Change the flow so we always fill in the IPv4 destination address for each
packet, rather than prefilling it from proto_update_l2_buf(). In fact for
TCP we already redundantly filled the destination for each packet anyway.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We partially prepopulate IP and TCP header structures including, amongst
other things the destination address, which for IPv4 is always the known
address of the guest/namespace. We partially precompute both the IPv4
header checksum and the TCP checksum based on this.
In future we're going to want more flexibility with controlling the
destination for IPv4 (as we already do for IPv6), so this precomputed value
gets in the way. Therefore remove the IPv4 destination from the
precomputed checksum and fold it into the checksum update when we actually
send a packet.
Doing this means we no longer need to recompute those partial sums when
the destination address changes ({tcp,udp}_update_l2_buf()) and instead
the computation can be moved to compile time. This means while we perform
slightly more computations on each packet, we slightly reduce the amount of
memory we need to access.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In tcp_seq_init() the meaning of "src" and "dst" isn't really clear since
it's used for connections in both directions. However, these values are
just feeding a hash, so as long as we're consistent and include all the
information we want, it doesn't really matter.
Oddly, for the "src" side we supply the (tap side) forwarding address but
the (tap side) endpoint port. This again doesn't really matter, but it's
confusing. So swap this with dstport, so "src" is always forwarding
and "dst" is always endpoint.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In a number of places the comments and variable names we use to describe
addresses and ports are ambiguous. It's not sufficient to describe a port
as "tap-facing" or "socket-facing", because on both the tap side and the
socket side there are two ports for the two ends of the connection.
Similarly, "local" and "remote" aren't particularly helpful, because it's
not necessarily clear whether we're talking from the point of view of the
guest/namespace, the host, or passt itself.
This patch makes a number of changes to be more precise about this. It
introduces two new terms in aid of this:
A "forwarding" address (or port) refers to an address which is local
from the point of view of passt itself. That is a source address for
traffic sent by passt, whether it's to the guest via the tap interface
or to a host on the internet via a socket.
The "endpoint" address (or port) is the reverse: a remote address
from passt's point of view, the destination address for traffic sent
by passt.
Between them the "side" (either tap/guest-facing or sock/host-facing)
and forwarding vs. endpoint unambiguously describes which address or
port we're talking about.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
The tap code passes the IPv4 or IPv6 destination address of packets it
receives to the protocol specific code. Currently that protocol code
doesn't use the source address, but we want it to in future. So, in
preparation, pass the IPv4/IPv6 source address of tap packets to those
functions as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
In tap6_handler() saddr is initialized to the IPv6 source address from the
incoming packet. However part way through, but before organizing the
packet into a "sequence" we set it unconditionally to the guest's assigned
address. We don't do anything equivalent for IPv4.
This doesn't make a lot of sense: if the guest is using a different source
address it makes sense to consider these different sequences of packets and
we shouldn't try to combine them together.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
...now it gets ugly. If we use pasta without an existing target
namespace, and run commands directly or spawn a shell, and keep
the pasta_t domain when we do, they won't be able to do much: a
shell might even start, but it's not going to be usable, or to
even display a prompt.
Ideally, pasta should behave like a shell when it spawns a command:
start as unconfined_t and automatically transition to whatever
domain is associated in the specific policy for that command. But
we can't run as unconfined_t, of course.
It would seem natural to switch to unconfined_t "just before", so
that the default transitions happen. But transitions can only happen
when we execvp(), and that's one single transition -- not two.
That is, this approach would work for:
pasta -- sh -c 'ip address show'
but not for:
pasta -- ip address show
If we configure a transition to unconfined_t when we run ip(8), we'll
really try to start that as unconfined_t -- but unconfined_t isn't
allowed as entrypoint for ip(8) itself, and execvp() will fail.
However, there aren't many different types of binaries pasta might
commonly run -- for example, we're unlikely to see pasta used to run
a mount(8) command.
Explicitly set up domain transition for common stuff -- switching to
unconfined_t for bin_t and shells works just fine, ip(8), ping(8),
arping(8) and similar need a different treatment.
While at it, allow commands we spawn to inherit resource limits and
signal masks, because that's what happens by default, and don't
require AT_SECURE sanitisation of the environment (because that
won't happen by default). Slightly unrelated: we also need to
explicitly allow pasta_t to use TTYs, not just PTYs, otherwise
we can't keep stdin and stdout open for shells.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
This is needed to monitor filesystem-bound namespaces and quit when
they're gone -- this feature never really worked with SELinux.
Fixes: 745a9ba4284c ("pasta: By default, quit if filesystem-bound net namespace goes away")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
That's what we actually need to check networking-related sysctls,
to scan for bound ports, and to manipulate bits of network
configuration inside pasta's target namespaces.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Somehow most of this used to work on older kernels, but now we need
to explicitly permit setuid, setgid, and setcap capabilities, as well
as read-only access to passwd (as we support running under a given
login name) and sssd library facilities.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Kernel commit ed5d44d42c95 ("selinux: Implement userns_create hook")
seems to just introduce a new functionality, but given that SELinux
implements a form of mandatory access control, introducing the new
permission breaks any application (shipping with SELinux policies)
that needs to create user namespaces, such as passt and pasta for
sandboxing purposes.
Add the new 'allow' rules. They appear to be backward compatible,
kernel-wise, and the policy now requires the new 'user_namespace'
class to build, but that's something distributions already ship.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
There's no reason to use wildcards, and we don't want any
similarly-named binary (not that I'm aware of any) to risk being
associated to passt_exec_t and pasta_exec_t by accident.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Makefile installs symbolic links by default, which actually
worked at some point (not by design) with SELinux, but at least on
recent kernel versions it doesn't anymore: override pasta (and
pasta.avx2) with hard links.
Otherwise, even if the links are labeled as pasta_exec_t, SELinux
will "resolve" them to passt_exec_t, and we'll have pasta running as
passt_t instead of pasta_t.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
|
| |
|
|
|
|
|
|
| |
Spotted by Coverity, relatively harmless.
Fixes: e01759e2fab0 ("tap: Explicitly drop IPv4 fragments, and give a warning")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we copy addresses from the host to the container in nl_addr_dup(), we
copy all the address's attributes, including IFA_CACHEINFO, which controls
the address's lifetime. If the host address is managed by, for example,
DHCP, it will typically have a finite lifetime.
When we copy that lifetime to the pasta container, that lifetime will
remain, meaning the kernel will eventually remove the address, typically
some hours later. The container, however, won't have the DHCP client or
whatever was managing and maintaining the address in the host, so it will
just lose connectivity.
Long term, we may want to monitor host address changes and reflect them to
the guest. But for now, we just want to take a snapshot of the host's
address and set those in the container permanently. We can accomplish that
by stripping off the IFA_CACHEINFO attribute as we copy addresses.
Link: https://github.com/containers/podman/issues/19405
Link: https://bugs.passt.top/show_bug.cgi?id=70
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In nl_addr_get() and nl_addr_dup() we step the attributes attached to each
RTM_NEWADDR message with a loop initialised with IFA_RTA() and
RTM_PAYLOAD() macros. RTM_PAYLOAD(), however is for RTM_NEWROUTE messages
(struct rtmsg), not RTM_NEWADDR messages (struct ifaddrmsg). Consequently
it miscalculates the size and means we can skip some attributes. Switch
to IFA_PAYLOAD() which we should be using here.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
In the loop within nl_addr_dup() we check and skip for any messages that
aren't of type RTM_NEWADDR. This is a leftover that was missed in the
recent big netlink cleanup. In fact we already check for the message type
in the nl_foreach_oftype() macro, so the explicit test is redudant.
Remove it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We give a fatal error if the port ranges from any port forwarding
specifiers overlap. This occurs even if those port ranges are specifically
bound to different addresses, so there's not really any overlap.
Right now, we can't 100% handle this case correctly, because our data
structures don't have a way to represent per-address forwarding. However,
there are a number of cases that will actually work just fine: e.g. mapping
the same port to the same port on two different addresses (say :: and
127.0.0.1).
We have long term plans to fix this properly, but that is still some time
away. For the time being, demote this error to a warning so that the cases
that already work will be allowed.
Link: https://bugs.passt.top/show_bug.cgi?id=56
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Currently we have a single epoll event type for the "tap" fd, which could
be either a handle on a /dev/net/tun device (pasta) or a connected Unix
socket (passt). However for the two modes we call different handler
functions. Simplify this a little by using different epoll types and
dispatching directly to the correct handler function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
tap_handler() actually handles events on three different types of object:
the /dev/tap character device (pasta), a connected Unix domain socket
(passt) or a listening Unix domain socket (passt).
The last, in particular, really has no handling in common with the others,
so split it into its own epoll type and directly dispatch to the relevant
handler from the top level.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
tcp_sock_handler() handles both listening TCP sockets, and connected TCP
sockets, but what it needs to do in those cases has essentially nothing in
common. Therefore, give listening sockets their own epoll_type value and
dispatch directly to their own handler from the top level. Furthermore,
the two handlers need essentially entirely different information from the
reference: we re-(ab)used the index field in the tcp_epoll_ref to indicate
the port for the listening socket, but that's not the same meaning. So,
switch listening sockets to their own reference type which we can lay out
as we please. That lets us remove the listen and outbound fields from the
normal (connected) tcp_epoll_ref, reducing it to just the connection table
index.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
tcp_sock_handler() actually handles several different types of fd events.
This includes timerfds that aren't sockets at all. The handling of these
has essentially nothing in common with the other cases. So, give the
TCP timers there own epoll_type value and dispatch directly to their
handler. This also means we can remove the timer field from tcp_epoll_ref,
the information it encoded is now implicit in the epoll_type value.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Move the test for c->no_udp into the function itself, rather than in the
dispatching switch statement to better localize the UDP specific logic, and
make for greated consistency with other handler functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We have different epoll type values for ICMP and ICMPv6 sockets, but they
both call the same handler function, icmp_sock_handler(). However that
function does essentially nothing in common for the two cases. So, split
it into icmp_sock_handler() and icmpv6_sock_handler() and dispatch them
separately from the top level.
While we're there remove some parameters that the function was never using
anyway. Also move the test for c->no_icmp into the functions, so that all
the logic specific to ICMP is within the handler, rather than in the top
level dispatch code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
When we process events from epoll_wait(), we check for a number of special
cases before calling sock_handler() which then dispatches based on the
protocol type of the socket in the event.
Fold these cases together into a single switch on the fd type recorded in
the epoll data field.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
epoll_ref contains a variety of information useful when handling epoll
events on our sockets, and we place it in the epoll_event data field
returned by epoll. However, for a few other things we use the 'fd' field
in the standard union of types for that data field.
This actually introduces a bug which is vanishingly unlikely to hit in
practice, but very nasty if it ever did: theoretically if we had a very
large file descriptor number for fd_tap or fd_tap_listen it could overflow
into bits that overlap with the 'proto' field in epoll_ref. With some
very bad luck this could mean that we mistakenly think an event on a
regular socket is an event on fd_tap or fd_tap_listen.
More practically, using different (but overlapping) fields of the
epoll_data means we can't unify dispatch for the various different objects
in the epoll. Therefore use the same epoll_ref as the data for the tap
fds and the netns quit fd, adding new fd type values to describe them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The epoll_ref type includes fields for the IP protocol of a socket, and the
socket fd. However, we already have a few things in the epoll which aren't
protocol sockets, and we may have more in future. Rename these fields to
an abstract "fd type" and file descriptor for more generality.
Similarly, rather than using existing IP protocol numbers for the type,
introduce our own number space. For now these just correspond to the
supported protocols, but we'll expand on that in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
We call tap_sock_reset() if tap_handler_passt() fails, or if we get an
error event on the socket. Fold that logic into tap_handler() passt itself
which simplifies the caller. It also makes it clearer that we had a
redundant EPOLL_CTL_DEL and close() in one of the reset paths, so fix that
too.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
If tap_handler_pasta() fails, we reset the connection. But in the case of
pasta the "reset" is just a fatal error. Fold the die() calls directly
into tap_handler_pasta() for simplicity.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We call tap_sock_unix_new() to handle a new connection to the qemu socket
if we get an EPOLLIN event on c->fd_tap_listen. If we get any other event
on the fd, we'll fall through to the "tap reset" path. But that won't do
anything relevant to the listening socket, it will just close the already
connected socket. Furthermore, the only other event we're subscribed to
for the listening socket is EPOLLRDHUP, which doesn't apply to a non
connected socket.
Remove EPOLLRDHUP from the subscribed events. We don't need to explicitly
add EPOLLERR, because errors are always reported. There's no obvious case
that would cause an error on a listening socket anyway, and it's not
obvious how we'd recover, treat it as a fatal error if it ever does happen.
Finally, fold all this handling into the tap_sock_unix_new() function,
there's no real reason to split it between there and tap_handler().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In tap_handler() if we get an error on the tap device or socket, we use
tap_sock_init() to re-initialise it. However, what we actually need for
this reset case has remarkably little in common with the case where we're
initialising for the first time:
* Re-initialising the packet pools is unnecessary
* The case of a passed in fd (--fd) isn't relevant
* We don't even call this for pasta mode
* We will never re-call tap_sock_unix_init() because we never clear
fd_tap_listen
In fact the only thing we do in tap_sock_init() relevant to the reset case
is to remove the fd from the epoll and close it... which isn't used in the
first initialisation case.
So make a new tap_sock_reset() function just for this case, and simplify
tap_sock_init() slightly as being used only for the first time case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The number of items in pool_l4_t is defined to UIO_MAXIOV,
not TAP_SEQS. TAP_SEQS is the number of the sequences.
Fix the value used to compare seq->p.count with.
Fixes: 37c228ada88b ("tap, tcp, udp, icmp: Cut down on some oversized buffers")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
[sbrivio: s/messages/sequences/ in commit message, extend
initialisation of packets in pool to UIO_MAXIOV items]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We now detect errors on netlink "set" operations while configuring the
pasta namespace with --config-net. However in many cases rather than
a simple "set" we use a more complex "dup" function to copy
configuration from the host to the namespace. We're not yet properly
detecting and reporting netlink errors for that case.
Change the "dup" operations to propagate netlink errors to their
caller, pasta_ns_conf() and report them there.
Link: https://bugs.passt.top/show_bug.cgi?id=60
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Minor formatting changes in pasta_ns_conf()]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently if we receive any netlink errors while discovering network
configuration from the host, we'll just ignore it and carry on. This
might lead to cryptic error messages later on, or even silent
misconfiguration.
We now have the mechanisms to detect errors from get/dump netlink
operations. Propgate these errors up to the callers and report them usefully.
Link: https://bugs.passt.top/show_bug.cgi?id=60
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A single netlink request can result in multiple response datagrams. We
process multiple response datagrams in some circumstances, but there are
cases where we exit early and will leave remaining datagrams in the queue.
These will be flushed in nl_send() before we send another request.
This is confusing, and not what we need to reliably check for errors from
netlink operations. So, instead, make sure we always process all the
response datagrams whenever we send a request (excepting fatal errors).
In most cases this is just a matter of avoiding early exits from nl_foreach
loops. nl_route_dup() is a bit trickier, because we need to retain all the
routes we're going to try to copy in a single buffer. Here we instead use
a secondary buffer to flush any remaining datagrams, and report an error
if there are any additional routes in those datagrams .
Link: https://bugs.passt.top/show_bug.cgi?id=67
Link: https://bugs.passt.top/show_bug.cgi?id=60
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently if anything goes wrong while we're configuring the namespace
network with --config-net, we'll just ignore it and carry on. This might
lead to a silently unconfigured or misconfigured namespace environment.
For simple "set" operations based on nl_do() we can now detect failures
reported via netlink. Propagate those errors up to pasta_ns_conf() and
report them usefully.
Link: https://bugs.passt.top/show_bug.cgi?id=60
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Minor formatting changes in pasta_ns_conf()]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In most cases where processing response messages, we expect only one type
of message (excepting NLMSG_DONE or NLMSG_ERROR), and so we need a test
and continue to skip anything else. Add a helper macro to do this.
This also fixes a bug in nl_get_ext_if() where we didn't have such a test
and if we got a message other than RTM_NEWROUTE we would have parsed
its contents as nonsense.
Also add a warning message if we get such an unexpected message type, which
could be useful for debugging if we ever hit it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently nl_req() sends the request, and receives a single response
datagram which we then process. However, a single request can result in
multiple response datagrams. That happens nearly all the time for DUMP
requests, where the 'DONE' message usually comes in a second datagram after
the NEW{LINK|ADDR|ROUTE} messages. It can also happen if there are just
too many objects to dump in a single datagram.
Allow our netlink code to process multiple response datagrams by splitting
nl_req() into three different helpers: nl_send() just sends a request,
without getting a response. nl_status() checks a single message to see if
it indicates the end of the reponses for our request. nl_next() moves onto
the next response message, whether it's in a datagram we already received
or we need to recv() a new one. We also add a 'for'-style macro to use
these to step through every response message to a request across multiple
datagrams.
While we're at it, be more thourough with checking that our sequence
numbers are in sync.
Link: https://bugs.passt.top/show_bug.cgi?id=67
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Currently we set NLBUFSIZ large enough for 8192 netlink headers (128kiB in
total), and reference netlink(7). However netlink(7) says nothing about
reponse buffer sizes, and the documents which do reference 8192 *bytes* not
8192 headers.
Update NLBUFSIZ to 64kiB with a more detailed rationale.
Link: https://bugs.passt.top/show_bug.cgi?id=67
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
So far we never checked for errors reported on netlink operations via
NLMSG_ERROR messages. This has led to several subtle and tricky to debug
situations which would have been obvious if we knew that certain netlink
operations had failed.
Introduce a nl_do() helper that performs netlink "do" operations (that is
making a single change without retreiving complex information) with much
more thorough error checking. As well as returning an error code if we
get an NLMSG_ERROR message, we also check for unexpected behaviour in
several places. That way if we've made a mistake in our assumptions about
how netlink works it should result in a clear error rather than some subtle
misbehaviour.
We update those calls to nl_req() that can use the new wrapper to do so.
We will extend those to better handle errors in future. We don't touch
non-"do" operations for now, those are a bit trickier.
Link: https://bugs.passt.top/show_bug.cgi?id=60
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Currently netlink functions need to fill in a full netlink header, as well
as a payload then call nl_req() to submit that to the kernel. It makes
things a bit terser if we just give the relevant header fields as
parameters to nl_req() and have it complete the header.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Errors on send() or recv() calls on a netlink socket don't indicate errors
with the netlink operations we're attempting, but rather that something's
gone wrong with the mechanics of netlink itself. We don't really expect
this to ever happen, and if it does, it's not clear what we could to to
recover.
So, treat errors from these calls as fatal, rather than returning the error
up the stack. This makes handling failures in the callers of nl_req()
simpler.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Netlink messages have a sequence number that's used to match requests to
responses. It mostly doesn't matter what it is as long as it monotonically
increases, so we just use a global counter which we advance with each
request.
However, we start this counter at 0, so our very first request has sequence
number 0, which is usually reserved for asynchronous messages from the
kernel which aren't in response to a specific request. Since we don't (for
now) use such async messages, this doesn't really matter, but it's not
good practce. So start the sequence at 1 instead.
Link: https://bugs.passt.top/show_bug.cgi?id=67
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
nl_req() is designed to handle a single netlink request message: it only
receives a single reply datagram for the request, and only waits for a
single NLMSG_DONE or NLMSG_ERROR message at the beginning to clear out
things from previous requests.
However, in both nl_addr_dup() and nl_route_dup() we can send multiple
request messages as a single datagram, with a single nl_req() call.
This can easily mean that the replies nl_req() collects get out of
sync with requests. We only get away with this because after we call
these functions we don't make any netlink calls where we need to parse
the replies.
This is fragile, so alter nl_*_dup() to make an nl_req() call for each
address it is adding in the target namespace.
For nl_route_dup() this fixes an additional minor problem: because
routes can have dependencies, some of the route add requests might
fail on the first attempt, so we need to repeat the requests a number
of times. When we did that, we weren't updating the sequence number
on each new attempt. This works, but not updating the sequence number
for each new request isn't ideal. Now that we're making the requests
one at a time, it's easier to make sure we update the sequence number
each time.
Link: https://bugs.passt.top/show_bug.cgi?id=67
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
All the netlink operations currently implicitly use one of the two global
netlink sockets, sometimes depending on an 'ns' parameter. Change them
all to explicitly take the socket to use (or two sockets to use in the case
of the *_dup() functions). As well as making these functions strictly more
general, it makes the callers easier to follow because we're passing a
socket variable with a name rather than an unexplained '0' or '1' for the
ns parameter.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Minor formatting changes in pasta_ns_conf()]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
|
