aboutgitcodebugslistschat
Commit message (Collapse)AuthorAgeFilesLines
* util: Make sock_l4() treat empty string ifname like NULLDavid Gibson2023-12-273-16/+7
| | | | | | | | | | | sock_l4() takes NULL for ifname if you don't want to bind the socket to a particular interface. However, for a number of the callers, it's more natural to use an empty string for that case. Change sock_l4() to accept either NULL or an empty string equivalently, and simplify some callers using that change. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Avoid in_addr_tDavid Gibson2023-12-272-3/+3
| | | | | | | | | | | | | | | IPv4 addresses can be stored in an in_addr_t or a struct in_addr. The former is just a type alias to a 32-bit integer, so doesn't really give us any type checking. Therefore we generally prefer the structure, since we mostly want to treat IP address as opaque objects. Fix a few places where we still use in_addr_t, but can just as easily use struct in_addr. Note there are still some uses of in_addr_t in conf.c, but those are justified: since they're doing prefix calculations, they actually need to look at the internals of the address as an integer. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* icmp: Avoid unnecessary handling of unspecified bind addressDavid Gibson2023-12-271-12/+4
| | | | | | | | | | We go to some trouble, if the configured output address is unspecified, to pass NULL to sock_l4(). But while passing NULL is one way to get sock_l4() not to specify a bind address, passing the "any" address explicitly works too. Use this to simplify icmp_tap_handler(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Drop explicit setting to INADDR_ANY/in6addr_any in sock_l4()David Gibson2023-12-271-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original commit message says: --- Currently we initialise the address field of the sockaddrs we construct to the any/unspecified address, but not in a very clear way: we use explicit 0 values, which is only interpretable if you know the order of fields in the sockaddr structures. Use explicit field names, and explicit initialiser macros for the address. Because we initialise to this default value, we don't need to explicitly set the any/unspecified address later on if the caller didn't pass an overriding bind address. --- and the original patch modified the initialisation of addr4 and addr6: - instead of { 0 }, { 0 } for sin_addr and sin_zero, .sin_addr = IN4ADDR_ANY_INIT - instead of 0, IN6ADDR_ANY_INIT, 0: .sin6_addr = IN6ADDR_ANY_INIT but I dropped those hunks: they break gcc versions 7 to 9 as reported in eed6933e6c29 ("udp: Explicitly initialise sin6_scope_id and sin_zero in sockaddr_in{,6}"). I applied the rest of the changes. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Dropped first two hunks] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: Use htonl_constant() in more placesDavid Gibson2023-12-271-2/+2
| | | | | | | | We might as well when we're passing a known constant value, giving the compiler the best chance to optimise things away. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Add IN4ADDR_ANY_INIT macroDavid Gibson2023-12-272-1/+4
| | | | | | | | | | We already define IN4ADDR_LOOPBACK_INIT to initialise a struct in_addr to the loopback address, make a similar one for the unspecified / any address. This avoids messying things with the internal structure of struct in_addr where we don't care about it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Use IN4ADDR_LOOPBACK_INIT more widelyDavid Gibson2023-12-273-4/+4
| | | | | | | | | | | We already define IN4ADDR_LOOPBACK_INIT to initialise a struct in_addr to the loopback address without delving into its internals. However there are some places we don't use it, and explicitly look at the internal structure of struct in_addr, which we generally want to avoid. Use the define more widely to avoid that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Fix address type for tcp_sock_init_af()David Gibson2023-12-271-1/+1
| | | | | | | | | | | | | | This takes a struct in_addr * (i.e. an IPv4 address), although it's explicitly supposed to handle IPv6 as well. Both its caller and sock_l4() which it calls use a void * for the address, which can be either an in_addr or an in6_addr. We get away with this, because we don't do anything with the pointer other than transfer it from the caller to sock_l4(), but it's misleading. And quite possibly technically UB, because C is like that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* checksum: Don't use linux/icmp.h when netinet/ip_icmp.h will doDavid Gibson2023-12-271-1/+1
| | | | | | | | | In most places where we need to get ICMP definitions, we get them from <netinet/ip_icmp.h>. However in checksum.c we instead include <linux/icmp.h>. Change it to use <netinet/ip_icmp.h> for consistency. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Don't account for hash table size in tcp_hash()David Gibson2023-12-271-13/+10
| | | | | | | | | | | | | | | Currently tcp_hash() returns the hash bucket for a value, that is the hash modulo the size of the hash table. Usually it's a bit more flexible to have hash functions return a "raw" hash value and perform the modulus in the callers. That allows the same hash function to be used for multiple tables of different sizes, or to re-use the hash for other purposes. We don't do anything like that with tcp_hash() at present, but we have some plans to do so. Prepare for that by making tcp_hash() and tcp_conn_hash() return raw hash values. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Implement hash table with indices rather than pointersDavid Gibson2023-12-272-11/+33
| | | | | | | | | | | | | We implement our hash table with pointers to the entry for each bucket (or NULL). However, the entries are always allocated within the flow table, meaning that a flow index will suffice, halving the size of the hash table. For TCP, just a flow index would be enough, but future uses will want to expand the hash table to cover indexing either side of a flow, so use a flow_sidx_t as the type for each hash bucket. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Switch hash table to linear probing instead of chainingDavid Gibson2023-12-273-56/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we deal with hash collisions by letting a hash bucket contain multiple entries, forming a linked list using an index in the connection structure. That's a pretty standard and simple approach, but in our case we can use an even simpler one: linear probing. Here if a hash bucket is occupied we just move onto the next one until we find a feww one. This slightly simplifies lookup and more importantly saves some precious bytes in the connection structure by removing the need for a link. It does require some additional complexity for hash removal. This approach can perform poorly with hash table load is high. However, we already size our hash table of pointers larger than the connection table, which puts an upper bound on the load. It's relatively cheap to decrease that bound if we find we need to. I adapted the linear probing operations from Knuth's The Art of Computer Programming, Volume 3, 2nd Edition. Specifically Algorithm L and Algorithm R in Section 6.4. Note that there is an error in Algorithm R as printed, see errata at [0]. [0] https://www-cs-faculty.stanford.edu/~knuth/all3-prepre.ps.gz Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Fix conceptually incorrect byte-order switch in tcp_tap_handler()David Gibson2023-12-271-1/+1
| | | | | | | | | | | | | | tcp_hash_lookup() expects the port numbers in host order, but the TCP header, of course, has them in network order, so we need to switch them. However we call htons() (host to network) instead of ntohs() (network to host). This works because those do the same thing in practice (they only wouldn't on very strange theoretical platforms which are neither big nor little endian). But, having this the "wrong" way around is misleading, so switch it around. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* README: Update "Availability" sectionStefano Brivio2023-12-271-13/+11
| | | | | | | | | It's been a while -- there are now official packages for Arch Linux, Gentoo, Void Linux. Suggested-by: Rahil Bhimjiani <me@rahil.website> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Cast timeval fields to unsigned long long for printingStefano Brivio2023-12-271-2/+3
| | | | | | | | | | | | On x32, glibc defines time_t and suseconds_t (the latter, also known as __syscall_slong_t) as unsigned long long, whereas "everywhere else", including x86_64 and i686, those are unsigned long. See also https://sourceware.org/bugzilla/show_bug.cgi?id=16437 for all the gory details. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow: Add missing include, stdio.hStefano Brivio2023-12-271-0/+1
| | | | | | | Reported-by: lemmi <lemmi@nerd2nerd.org> Link: https://github.com/void-linux/void-packages/actions/runs/7097192513/job/19316903568 Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Select first reported IPv6 address for guest/host comparisonStefano Brivio2023-12-275-11/+11
| | | | | | | | | | | | | | | | | | | | If we run passt nested (a guest connected via passt to a guest connected via passt to the host), the first guest (L1) typically has two IPv6 addresses on the same interface: one formed from the prefix assigned via SLAAC, and another one assigned via DHCPv6 (to match the address on the host). When we select addresses for comparison, in this case, we have multiple global unicast addresses -- again, on the same interface. Selecting the first reported one on both host and guest is not entirely correct (in theory, the order might differ), but works reasonably well. Use the trick from 5beef085978e ("test: Only select a single interface or gateway in tests") to ask jq(1) for the first address returned by the query. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* ndp: Extend lifetime of prefix, router, RDNSS and search listStefano Brivio2023-12-271-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Currently, we have no mechanism to dynamically update IPv6 addressing, routing or DNS information (which should eventually be implemented via netlink monitor), so it makes no sense to limit lifetimes of NDP information to any particular value. If we do, with common configurations of systemd-networkd in a guest, we can end up in a situation where we have a /128 address assigned via DHCPv6, the NDP-assigned prefix expires, and the default route also expires. However, as there's a valid address, the prefix is not renewed. As a result, the default route becomes invalid and we lose it altogether, which implies that the guest loses IPv6 connectivity except for link-local communication. Set the router lifetime to the maximum allowed by RFC 8319, that is, 65535 seconds (about 18 hours). RFC 4861 limited this value to 9000 seconds, but RFC 8319 later updated this limit. Set prefix and DNS information lifetime to infinity. This is allowed by RFC 4861 and RFC 8319. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* test: Make handling of shell prompts with escapes a little more reliableDavid Gibson2023-12-071-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | When using the old-style "pane" methods of executing commands during the tests, we need to scan the shell output for prompts in order to tell when commands have finished. This is inherently unreliable because commands could output things that look like prompts, and prompts might not look like we expect them to. The only way to really fix this is to use a better way of dispatching commands, like the newer "context" system. However, it's awkward to convert everything to "context" right at the moment, so we're still relying on some tests that do work most of the time. It is, however, particularly sensitive to fancy coloured prompts using escape sequences. Currently we try to handle this by stripping actual ESC characters with tr, then looking for some common variants. We can do a bit better: instead strip all escape sequences using sed before looking for our prompt. Or, at least, any one using [a-zA-Z] as the terminating character. Strictly speaking ANSI escapes can be terminated by any character in 0x40..0x7e, which isn't easily expressed in a regexp. This should capture all common ones, though. With this transformation we can simplify the list of patterns we then look for as a prompt, removing some redundant variants. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Don't defer hash table removal2023_12_04.b86afe3David Gibson2023-12-041-3/+7
| | | | | | | | | | | | | | | | | | | When a TCP connection is closed, we mark it by setting events to CLOSED, then some time later we do final cleanups: closing sockets, removing from the hash table and so forth. This does mean that when making a hash lookup we need to exclude any apparent matches that are CLOSED, since they represent a stale connection. This can happen in practice if one connection closes and a new one with the same endpoints is started shortly afterward. Checking for CLOSED is quite specific to TCP however, and won't work when we extend the hash table to more general flows. So, alter the code to immediately remove the connection from the hash table when CLOSED, although we still defer closing sockets and other cleanup. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: "TCP" hash secret doesn't need to be TCP specificDavid Gibson2023-12-044-35/+44
| | | | | | | | | | | | | The TCP state structure includes a 128-bit hash_secret which we use for SipHash calculations to mitigate attacks on the TCP hash table and initial sequence number. We have plans to use SipHash in places that aren't TCP related, and there's no particular reason they'd need their own secret. So move the hash_secret to the general context structure. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* pif: Add helpers to get the name of a pifDavid Gibson2023-12-043-1/+42
| | | | | | | | | | | Future debugging will want to identify a specific passt interface. We make a distinction in these helpers between the name of the *type* of pif, and name of the pif itself. For the time being these are always the same thing, since we have at most instance of each type of pif. However, that might change in future. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test: Avoid hitting guestfish command length limitsDavid Gibson2023-12-041-1/+1
| | | | | | | | | | | | | | | | In test/prepare-distro-img.sh we use guestfish to tweak our distro guest images to be suitable. Part of this is using a 'copy-in' directive to copy in the source files for passt itself. Currently we copy in all the files with a single 'copy-in', since it allows listing multiple files. However it turns out that the number of arguments it can accept is fairly limited and our current list of files is already very close to that limit. Instead, expand our list of files to one copy-in per file, avoiding that limitation. This isn't much slower, because all the commands still run in a single invocation of guestfish itself. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow,tcp: Use epoll_ref type including flow and sideDavid Gibson2023-12-045-30/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently TCP uses the 'flow' epoll_ref field for both connected sockets and timers, which consists of just the index of the relevant flow (connection). This is just fine for timers, for while it obviously works, it's subtly incomplete for sockets on spliced connections. In that case we want to know which side of the connection the event is occurring on as well as which connection. At present, we deduce that information by looking at the actual fd, and comparing it to the fds of the sockets on each side. When we use the flow table for more things, we expect more cases where something will need to know a specific side of a specific flow for an event, but nothing more. Therefore add a new 'flowside' epoll_ref field, with exactly that information. We use it for TCP connected sockets. This allows us to directly know the side for spliced connections. For "tap" connections, it's pretty meaningless, since the side is always the socket side. It still makes logical sense though, and it may become important for future flow table work. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp_splice: Use unsigned to represent sideDavid Gibson2023-12-041-3/+4
| | | | | | | | | | | | | | | Currently, we use 'int' values to represent the "side" of a connection, which must always be 0 or 1. This turns out to be dangerous. In some cases we're going to want to put the side into a 1-bit bitfield. However, if that bitfield has type 'int', when we copy it out to a regular 'int' variable, it will be sign-extended and so have values 0 and -1, instead of 0 and 1. To avoid this, always use unsigned variables for the side. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow,tcp: Generalise TCP epoll_ref to generic flowsDavid Gibson2023-12-043-10/+10
| | | | | | | | | | | | | | TCP uses three different epoll object types: one for connected sockets, one for timers and one for listening sockets. Listening sockets really need information that's specific to TCP, so need their own epoll_ref field. Timers and connected sockets, however, only need the connection (flow) they're associated with. As we expand the use of the flow table, we expect that to be true for more epoll fds. So, rename the "TCP" epoll_ref field to be a "flow" epoll_ref field that can be used both for TCP and for other future cases. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Remove unneccessary bounds check in tcp_timer_handler()David Gibson2023-12-041-2/+2
| | | | | | | | | In tcp_timer_handler() we use conn_at_idx() to interpret the flow index from the epoll reference. However, this will never be NULL - we always put a valid index into the epoll_ref. Simplify slightly based on this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow: Introduce 'sidx' type to represent one side of one flowDavid Gibson2023-12-042-0/+52
| | | | | | | | | | | | | | In a number of places, we use indices into the flow table to identify a specific flow. We also have cases where we need to identify a particular side of a particular flow, and we expect those to become more common as we generalise the flow table to cover more things. To assist with that, introduces flow_sidx_t, an index type which identifies a specific side of a specific flow in the table. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Suppress false cppcheck positive in flow_sidx()] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Add logging helpers for connection related messagesDavid Gibson2023-12-044-79/+96
| | | | | | | | | | | | | | | | | | | Most of the messages logged by the TCP code (be they errors, debug or trace messages) are related to a specific connection / flow. We're fairly consistent about prefixing these with the type of connection and the connection / flow index. However there are a few places where we put the index later in the message or omit it entirely. The template with the prefix is also a little bulky to carry around for every message, particularly for spliced connections. To help keep this consistent, introduce some helpers to log messages linked to a specific flow. It takes the flow as a parameter and adds a uniform prefix to each message. This makes things slightly neater now, but more importantly will help keep formatting consistent as we add more things to the flow table. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow: Make unified version of flow table compactionDavid Gibson2023-12-045-44/+48
| | | | | | | | | | | tcp_table_compact() will move entries in the connection/flow table to keep it compact when other entries are removed. The moved entries need not have the same type as the flow removed, so it needs to be able to handle moving any type of flow. Therefore, move it to flow.c rather than being purportedly TCP specific. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* util: MAX_FROM_BITS() should be unsignedDavid Gibson2023-12-042-2/+2
| | | | | | | | | | | | | | | MAX_FROM_BITS() computes the maximum value representable in a number of bits. The expression for that is an unsigned value, but we explicitly cast it to a signed int. It looks like this is because one of the main users is for FD_REF_MAX, which is used to bound fd values, typically stored as a signed int. The value MAX_FROM_BITS() is calculating is naturally non-negative, though, so it makes more sense for it to be unsigned, and to move the case to the definition of FD_REF_MAX. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Consolidate flow pointer<->index helpersDavid Gibson2023-12-044-46/+69
| | | | | | | | | | | | | | | | | | | Both tcp.c and tcp_splice.c define CONN_IDX() variants to find the index of their connection structures in the connection table, now become the unified flow table. We can easily combine these into a common helper. While we're there, add some trickery for some additional type safety. They also define their own CONN() versions, which aren't so easily combined since they need to return different types, but we can have them use a common helper. In the process, we standardise on always using an unsigned type to store the connection / flow index, which makes more sense. tcp.c's conn_at_idx() remains for now, but we change its parameter to unsigned to match. That in turn means we can remove a check for negative values from it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Move TCP connection table to unified flow tableDavid Gibson2023-12-049-82/+107
| | | | | | | | | | | | | We want to generalise "connection" tracking to things other than true TCP connections. Continue implenenting this by renaming the TCP connection table to the "flow table" and moving it to flow.c. The definitions are split between flow.h and flow_table.h - we need this separation to avoid circular dependencies: the definitions in flow.h will be needed by many headers using the flow mechanism, but flow_table.h needs all those protocol specific headers in order to define the full flow table entry. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* flow, tcp: Generalise connection typesDavid Gibson2023-12-046-40/+112
| | | | | | | | | | | | Currently TCP connections use a 1-bit selector, 'spliced', to determine the rest of the contents of the structure. We want to generalise the TCP connection table to other types of flows in other protocols. Make a start on this by replacing the tcp_conn_common structure with a new flow_common structure with an enum rather than a simple boolean indicating the type of flow. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Add messages to static_assert() callsDavid Gibson2023-12-041-2/+4
| | | | | | | | | | | | | | | | A while ago, we updated passt to require C11, for several reasons, but one was to be able to use static_assert() for build time checks. The C11 version of static_assert() requires a message to print in case of failure as well as the test condition it self. It was extended in C23 to make the message optional, but we don't want to require C23 at this time. Unfortunately we missed that in some of the static_assert()s we already added which use the C23 form without a message. clang-tidy has a warning for this, but for some reason it's not seeming to trigger in the current cases (but did for some I'm working on adding). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: remove useless assignmentLaurent Vivier2023-12-041-1/+0
| | | | | | | | | | | | | | | | | | | | In tcp_send_flag(), a4826ee04b76 has replaced: th->doff = sizeof(*th) / 4; th->doff += OPT_MSS_LEN / 4; th->doff += (1 + OPT_WS_LEN) / 4; by optlen = OPT_MSS_LEN + 1 + OPT_WS_LEN; th->doff = (sizeof(*th) + optlen) / 4; but forgot to remove the useless "th->doff += (1 + OPT_WS_LEN) / 4;" Fixes: a4826ee04b76 ("tcp: Defer and coalesce all segments with no data (flags) to handler") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* port_fwd, util: Include additional headers to fix build with muslStefano Brivio2023-12-022-0/+3
| | | | | | | | | | | | | lseek() is declared in unistd.h, and stdio.h provides sscanf(). Include these two headers in port_fwd.c. SIGCHLD, even if used exclusively for clone(), is defined in signal.h: add the include to util.h, as NS_CALL needs it. Reported-by: lemmi <lemmi@nerd2nerd.org> Link: https://github.com/void-linux/void-packages/actions/runs/6999782606/job/19039526604#step:7:57 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* packet: Offset plus length is not always uint32_t, but it's always size_tStefano Brivio2023-12-021-1/+1
| | | | | | | | | | | | | According to gcc, PRIu32 matches the type of the argument we're printing here on both 64 and 32-bits architectures. According to Clang, though, that's not the case, as the result of the sum is an unsigned long on 64-bit. Use the z modifier, given that we're summing uint32_t to size_t, and the result is at most promoted to size_t. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* treewide: Use 'z' length modifier for size_t/ssize_t conversionsStefano Brivio2023-12-026-21/+22
| | | | | | | | Types size_t and ssize_t are not necessarily long, it depends on the architecture. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
* port_fwd, util: Don't bind UDP ports with opposite-side bound TCP portsStefano Brivio2023-11-225-11/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When pasta periodically scans bound ports and binds them on the other side in order to forward traffic, we bind UDP ports for corresponding TCP port numbers, too, to support protocols and applications such as iperf3 which use UDP port numbers matching the ones used by the TCP data connection. If we scan UDP ports in order to bind UDP ports, we skip detection of the UDP ports we already bound ourselves, to avoid looping back our own ports. Same with scanning and binding TCP ports. But if we scan for TCP ports in order to bind UDP ports, we need to skip bound TCP ports too, otherwise, as David pointed out: - we find a bound TCP port on side A, and bind the corresponding TCP and UDP ports on side B - at the next periodic scan, we find that UDP port bound on side B, and we bind the corresponding UDP port on side A - at this point, we unbind that UDP port on side B: we would otherwise loop back our own port. To fix this, we need to avoid binding UDP ports that we already bound, on the other side, as a consequence of finding a corresponding bound TCP port. Reproducing this issue is straightforward: ./pasta -- iperf3 -s # Wait one second, then from another terminal: iperf3 -c ::1 -u Reported-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp> Analysed-by: David Gibson <david@gibson.dropbear.id.au> Fixes: 457ff122e33c ("udp,pasta: Periodically scan for ports to automatically forward") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* valgrind: Don't disable optimizations for valgrind builds2023_11_19.4f1709dDavid Gibson2023-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When we plan to use valgrind, we need to build passt a bit differently: * We need debug symbols so that valgrind can match problems it finds to meaningful locations * We need to allow additional syscalls in the seccomp filter, because valgrind's wrappers need them Currently we also disable optimization (-O0). This is unfortunate, because it will make valgrind tests even slower than they'd otherwise be. Worse, it's possible that the asm behaviour without optimization might be different enough that valgrind could miss a use of uninitialized variable or other fault it would detect. I suspect this was originally done because without it inlining could mean that suppressions we use don't reliably match the places we want them to. Alas, it turns out this is true even with -O0. We've now implemented a more robust workaround for this (explicit ((noinline)) attributes when compiled with -DVALGRIND). So, we can re-enable optimization for valgrind builds, making them closer to regular builds. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* valgrind: Adjust suppression for MSG_TRUNC with NULL bufferDavid Gibson2023-11-193-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | valgrind complains if we pass a NULL buffer to recv(), even if we use MSG_TRUNC, in which case it's actually safe. For a long time we've had a valgrind suppression for this. It singles out the recv() in tcp_sock_consume(), the only place we use MSG_TRUNC. However, tcp_sock_consume() only has a single caller, which makes it a prime candidate for inlining. If inlined, it won't appear on the stack and valgrind won't match the correct suppression. It appears that certain compiler versions (for example gcc-13.2.1 in Fedora 39) will inline this function even with the -O0 we use for valgrind builds. This breaks the suppression leading to a spurious failure in the tests. There's not really any way to adjust the suppression itself without making it overly broad (we don't want to match other recv() calls). So, as a hack explicitly prevent inlining of this function when we're making a valgrind build. To accomplish this add an explicit -DVALGRIND when making such a build. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp,pasta: Periodically scan for ports to automatically forwardDavid Gibson2023-11-192-2/+75
| | | | | | | | | | | | | | | | | | | | | | pasta supports automatic port forwarding, where we look for listening sockets in /proc/net (in both namespace and outside) and establish port forwarding to match. For TCP we do this scan both at initial startup, then periodically thereafter. For UDP however, we currently only scan at start. So unlike TCP we won't update forwarding to handle services that start after pasta has begun. There's no particular reason for that, other than that we didn't implement it. So, remove that difference, by scanning for new UDP forwards periodically too. The logic is basically identical to that for TCP, but it needs some changes to handle the mildly different data structures in the UDP case. Link: https://bugs.passt.top/show_bug.cgi?id=45 Link: https://github.com/rootless-containers/rootlesskit/issues/383 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Simplify away tcp_port_rebind()David Gibson2023-11-191-29/+12
| | | | | | | | | | | | | | | | | tcp_port_rebind() is desgined to be called from NS_CALL() and has two disjoint cases: one where it enters the namespace (outbound forwards) and one where it doesn't (inbound forwards). We only actually need the NS_CALL() framing for the outbound case, for inbound we can just call tcp_port_do_rebind() directly. So simplify tcp_port_rebind() to tcp_port_rebind_outbound(), allowing us to eliminate an awkward parameters structure. With that done we can safely rename tcp_port_do_rebind() to tcp_port_rebind() for brevity. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Use common helper for rebinding inbound and outbound portsDavid Gibson2023-11-191-47/+45
| | | | | | | | | tcp_port_rebind() has two cases with almost but not quite identical code. Simplify things a bit by factoring this out into a single parameterised helper, tcp_port_do_rebind(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* clang-tidy: Suppress silly misc-include-cleaner warningsDavid Gibson2023-11-191-1/+8
| | | | | | | | | | | | | | | | | | clang-tidy from LLVM 17.0.3 (which is in Fedora 39) includes a new "misc-include-cleaner" warning that tries to make sure that headers *directly* provide the things that are used in the .c file. That sounds great in theory but is in practice unusable: Quite a few common things in the standard library are ultimately provided by OS-specific system headers, but for portability should be accessed via closer-to-standardised library headers. This will warn constantly about such cases: e.g. it will want you to include <linux/limits.h> instead of <limits.h> to get PATH_MAX. So, suppress this warning globally in the Makefile. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap, pasta: Handle short writes to /dev/tap2023_11_10.5ec3634David Gibson2023-11-101-1/+7
| | | | | | | | | | | | | | | tap_send_frames_pasta() sends frames to the namespace by sending them to our the /dev/tap device. If that write() returns an error, we already handle it. However we don't handle the case where the write() returns short, meaning we haven't successfully transmitted the whole frame. I don't know if this can ever happen with the kernel tap device, but we should at least report the case so we don't get a cryptic failure. For the purposes of the return value for tap_send_frames_pasta() we treat this case as though it was an error (on the grounds that a partial frame is no use to the namespace). Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tap, pasta: Handle incomplete tap sends for pasta tooDavid Gibson2023-11-101-3/+1
| | | | | | | | | | | | | | | | | | | | Since a469fc39 ("tcp, tap: Don't increase tap-side sequence counter for dropped frames") we've handled more gracefully the case where we get data from the socket side, but are temporarily unable to send it all to the tap side (e.g. due to full buffers). That code relies on tap_send_frames() returning the number of frames it successfully sent, which in turn gets it from tap_send_frames_passt() or tap_send_frames_pasta(). While tap_send_frames_passt() has returned that information since b62ed9ca ("tap: Don't pcap frames that didn't get sent"), tap_send_frames_pasta() always returns as though it succesfully sent every frame. However there certainly are cases where it will return early without sending all frames. Update it report that properly, so that the calling functions can handle it properly. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tcp: Don't use TCP_WINDOW_CLAMPDavid Gibson2023-11-102-60/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the L2 tap side, we see TCP headers and know the TCP window that the ultimate receiver is advertising. In order to avoid unnecessary buffering within passt/pasta (or by the kernel on passt/pasta's behalf) we attempt to advertise that window back to the original sock-side sender using TCP_WINDOW_CLAMP. However, TCP_WINDOW_CLAMP just doesn't work like this. Prior to kernel commit 3aa7857fe1d7 ("tcp: enable mid stream window clamp"), it simply had no effect on established sockets. After that commit, it does affect established sockets but doesn't behave the way we need: * It appears to be designed only to shrink the window, not to allow it to re-expand. * More importantly, that commit has a serious bug where if the setsockopt() is made when the existing kernel advertised window for the socket happens to be zero, it will now become locked at zero, stopping any further data from being received on the socket. Since this has never worked as intended, simply remove it. It might be possible to re-implement the intended behaviour by manipulating SO_RCVBUF, so we leave a comment to that effect. This kernel bug is the underlying cause of both the linked passt bug and the linked podman bug. We attempted to fix this before with passt commit d3192f67 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag"). However while that commit masked the bug for some cases, it didn't really address the problem. Fixes: d3192f67c492 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag") Link: https://github.com/containers/podman/issues/20170 Link: https://bugs.passt.top/show_bug.cgi?id=74 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Rename and small cleanup to tcp_clamp_window()David Gibson2023-11-101-11/+10
| | | | | | | | | | | | tcp_clamp_window() is _mostly_ about using TCP_WINDOW_CLAMP to control the sock side advertised window, but it is also responsible for actually updating the conn->wnd_from_tap value. Rename to tcp_tap_window_update() to reflect that broader purpose, and pull the logic that's not TCP_WINDOW_CLAMP related out to the front. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 17:21:38 +0000