aboutgitcodebugslistschat
Commit message (Collapse)AuthorAgeFilesLines
* conf: Fix one Coverity CID 258163 warning, work around another oneStefano Brivio2022-05-201-5/+3
| | | | | | | | | | | | | | | In conf_runas(), Coverity reports that we might dereference uid and gid despite possibly being NULL (CWE-476) because of the check after the first sscanf(). They can't be NULL, but I actually wanted to check that UID and GID are non-zero (the user could otherwise pass --runas root:root and defy the whole mechanism). Later on, we have the same type of warning for 'gr': it's compared against NULL, so it might be NULL, which is actually the case: but in that case, we don't dereference it, because we'll return -ENOENT right away. Rewrite the clause to silence the warning. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Work around gcc 12 bogus warning in tcp_rtt_dst_check()Stefano Brivio2022-05-201-0/+6
| | | | | | | | | | | | | | | | | | | gcc 12.1.x (e.g. current OpenSUSE Tumbleweed, x86_64 only, gcc-12-1.4.x86_64) reports: tcp.c: In function ‘tcp_send_flag’: tcp.c:1014:9: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=] 1014 | memcpy(low_rtt_dst + hole++, &conn->a.a6, sizeof(conn->a.a6)); | ^ tcp.c:559:24: note: at offset -16 into destination object ‘low_rtt_dst’ of size 128 559 | static struct in6_addr low_rtt_dst[LOW_RTT_TABLE_SIZE]; | but 'hole' can't be -1, because the low_rtt_dst table is guaranteed to have a hole: if we happened to write to the last entry, we'll go back to index 0 and clear that one. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf: Add --runas option, changing to given UID and GID if started as rootStefano Brivio2022-05-196-46/+135
| | | | | | | | | | | | | | On some systems, user and group "nobody" might not be available. The new --runas option allows to override the default "nobody" choice if started as root. Now that we allow this, drop the initgroups() call that was used to add any additional groups for the given user, as that might now grant unnecessarily broad permissions. For instance, several distributions have a "kvm" group to allow regular user access to /dev/kvm, and we don't need that in passt or pasta. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Ignore bogus -Wstringop-overread for write() from gcc 12.1Stefano Brivio2022-05-192-0/+27
| | | | | | | | | | | | | | | | | With current OpenSUSE Tumbleweed on aarch64 (gcc-12-1.3.aarch64) and on x86_64 (gcc-12-1.4.x86_64), but curiously not on armv7hl (gcc-12-1.3.armv7hl), gcc warns about using the _pointer_ to the 802.3 header to write the whole frame to the tap descriptor: reading between 62 and 4294967357 bytes from a region of size 14 which is bogus: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103483 Probably declaring udp_sock_fill_data_v{4,6}() as noinline would "fix" this, but that's on the data path, so I'd rather not. Use a gcc pragma instead. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Don't check exit code for every command in demo modeStefano Brivio2022-05-191-0/+3
| | | | | | | Having all those 'echo $?' is rather distracting in demos. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Sefano Brivio <sbrivio@redhat.com>
* tests: Don't count number of test units for demosStefano Brivio2022-05-191-2/+4
| | | | | | | | ...there are no 'test' directives in demo, and this causes a script failure. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* demo/pasta: Fix bad sleep directiveStefano Brivio2022-05-191-1/+1
| | | | | | | | 'sleep' always needs an argument, this was meant to introduce a 2 seconds delay. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/run: Return 0 from run(), exit value already reflects failuresStefano Brivio2022-05-191-1/+1
| | | | | | | | | | | There's no need to return non-zero if there have been failures in run(), because the exit value is already determined from the number of failures reported in the log file. Return zero, so that this doesn't cause the script to fail, given we now run it with -e. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/perf/pasta_udp: Drop redundant assignment of ::1 to loopback interfaceStefano Brivio2022-05-191-1/+0
| | | | | | | | | | | There are a few occurrences of this assignment, which are needed to re-add ::1 as loopback address after the MTU has been increased back from a value below 1280 bytes. This one, however, is redundant, and causes an error in the execution. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Simplify explicit checks for command successDavid Gibson2022-05-195-52/+24
| | | | | | | | | A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Simplify *tools commands using pane_statusDavid Gibson2022-05-191-15/+10
| | | | | | | | | Now that we have pane_status to check the success of commands issued to panes, we can more easily check for the success of the 'which' commands used to check tool availability, rather than constructing, then parsing special "skip" output. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Add pane_status command to check for success of issued commandsDavid Gibson2022-05-193-50/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | When we use pane_wait to wait for a command issued to a tmux pane to finish we have no idea whether the command succeeded or not. This means that the test scripts can keep running long after the point something vital has failed, making it difficult to work out what went wrong. Add a new pane_status command that checks for success of the issued command and use it in most places instead of pane_wait. We still need explicit pane_wait where we're gathering explicit output with pane_parse, because the way we check the status with 'echo $?' means we lose track of that output. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: - instead of quitting the script, make a test fail if a command issued in a pane fails during a test, and loop until the status code is numeric in pane_status() as a hack to make it a bit more robust - retain usage of pane_wait() in iperf3 and teardown functions as we interrupt iperf3, passt, and pasta, so a non-zero exit code is expected - drop bogus ns_{1,2}_wait() calls in teardown_two_guests(), those functions were never implemented - use pane_status() for "guest" test directives too ] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Don't ignore errors during scriptDavid Gibson2022-05-192-6/+6
| | | | | | | | | | | | | | | | Most commands issued during the testing scripts aren't explicitly checked for errors. Therefore, if they fail, the shell will just keep on executing. This makes it difficult to figure out where things started going wrong if things fall over. Run the whole script with the set -e mode so that it will exit in the case of any (unchecked) failing command. To make this work we do need to add explicit checks / fallbacks for some commands which we expect to fail. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: use sh -e instead of setting -e later, so that we don't miss anything before set -e is issued] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Improve control character filtering in pane_parseDavid Gibson2022-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | pane_parse() attempts to grab the output from the last command issued into a tmux pane. It strips out control characters using tr, which in particular includes the final \r\n. However, this won't fully strip out terminal escape sequences. In particular this breaks if the shell in the pane is bash, with enable-bracketed-paste enabled in readline. That issues terminal sequences to enable and disable bracketed paste mode around every shell prompt. We can work around this because these escapes are followed by a \r (CR). More generally, it seems reasonable to assume that any terminal shenanigans followed by a CR, but not an LF is supposed to be hidden. So, use sed to strip everything before the second last CR. We still need the tr to remove the final \r\n from the string (sed processes a line at a time, and doesn't consider the CRLF part of the buffer it's processing). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: modify regexp to keep foo\r\r\n unchanged, by matching on at least one CR and a non-CR afterwards: that's the usual output pattern for bash on Debian 8 and Debian 9] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tests: Don't globally set tmux default-shellDavid Gibson2022-05-191-6/+7
| | | | | | | | | | | | | | | | | run_term() uses tmux set-option -g to globally set the default shell. Unfortunately this hits a chicken-and-egg problem that's common with many of tmux's session options. If there isn't already a tmux server running, we can't connect to set the option. If we attempt this after starting our session (and therefore the server), then the session will already be started with the previous default shell. In any case it's not a good idea to set tmux global options, since that might interfere with whatever else the user is doing in tmux. So, instead set the default-shell option locally to the session after starting it. To make sure we get the right shell for our initial script, explicitly invoke /bin/sh to interpret it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Don't use tmux update-environmentDavid Gibson2022-05-191-4/+5
| | | | | | | | | | | | | | | | | The semantics of tmux's update-environment option are a bit confusing. It says it means the given variables are copied into the session environment from the source environment, but it's not entirely clear what the "source" environment means. From my experimentation it appeast to be the environment from which the tmux *server* is launched, not the one issuing the 'new-session' command. That makes it pretty much useles, certainly in our case where we have no way of knowing if the user has pre-existing tmux sessions. Instead use the new-session -e option to explicitly pass in the variables we want to propagate. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Add some debugging output for the test scripts themselvesDavid Gibson2022-05-191-0/+2
| | | | | | | | | | | | The DEBUG option for tests/run enables debugging options to passt/pasta, however that doesn't help with debugging the test scripts themselves, which are fairly fragile. Extend the DEBUG option so it also prints information on each command in the test scripts to make it easier to work out where things are falling over. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Remove unused XVFB variableDavid Gibson2022-05-191-3/+0
| | | | | | | The XVFB variable is initialized at the beginning of test/run then never used again. I'm assuming it's a leftover from some ealier iteration. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* tests: Update mbuto git URLsStefano Brivio2022-05-192-2/+2
| | | | | | The project is now at mbuto.sh, and git transport is enabled. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* Add basic .gitignore filesDavid Gibson2022-05-192-0/+10
| | | | | | | Ignore various files generated during build or test. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* qrap.1: Clarify it takes a qemu command, not a pathStefano Brivio2022-05-191-3/+3
| | | | | Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* demo: podman: New port forwarding behaviour for pasta, minor fixesStefano Brivio2022-05-021-78/+56
| | | | | | | | | | | | Reflect the recent changes in the Podman adaptation (no port forwarding by default). It turns out that by running two iperf3 processes, sometimes slirp4netns blocks the second connection until the first test is done, thus doubling the throughput. Use a single process for slirp4netns with slirp4netns port handling. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* contrib: podman: Add bound address configuration, update port specificationsStefano Brivio2022-05-021-101/+168
| | | | | | | | | | | | | | | | | | Rebase the patch for Podman on top of current upstream, and: - add support for configuration of specific addresses for forwarded ports - by default, disable port forwarding, and reflect this in the man page changes - adjust processing to a new, incompatible format for port storage, which I couldn't actually track down to a specific commit, but that resulted in https://github.com/containers/podman/issues/13643 and commit eedaaf33cdbf ("fix slirp4netns port forwarding with ranges") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* netlink: In nl_addr() and nl_route(), don't return before set requestStefano Brivio2022-05-011-2/+2
| | | | | Fixes: 22ed4467a413 ("treewide: Unchecked return value from library, CWE-252") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, tcp, udp: Allow address specification for forwarded portsStefano Brivio2022-05-0110-156/+274
| | | | | | | | | | | | | This feature is available in slirp4netns but was missing in passt and pasta. Given that we don't do dynamic memory allocation, we need to bind sockets while parsing port configuration. This means we need to process all other options first, as they might affect addressing and IP version support. It also implies a minor rework of how TCP and UDP implementations bind sockets. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp_splice: Allow up to 8 MiB as pipe sizeStefano Brivio2022-04-071-1/+1
| | | | | | It actually improves throughput a bit, if allowed by user limits. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib: Add small delay before trying to parse outputStefano Brivio2022-04-071-0/+1
| | | | | | | Don't fetch the log too early, we might get output from previous commands. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/distro: Set unprivileged_userns_clone on Debian Buster and earlierStefano Brivio2022-04-071-0/+4
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* test/lib: Consistent cols, rows, poster attributes for asciinema playerStefano Brivio2022-04-072-2/+2
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* arch: Pointer to local outside scope, CWE-562Stefano Brivio2022-04-071-5/+5
| | | | | | | | | Reported by Coverity: if we fail to run the AVX2 version, once execve() fails, we had already replaced argv[0] with the new stack-allocated path string, and that's then passed back to main(). Use a static variable instead. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* udp: Out-of-bounds read, CWE-125 in udp_timer()Stefano Brivio2022-04-071-1/+1
| | | | | | | Not an actual issue due to how it's typically stored, but udp_act can also be used for ports 65528-65535. Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: False "Out-of-bounds read" positive, CWE-125Stefano Brivio2022-04-071-1/+5
| | | | | | | Reported by Coverity: it doesn't see that tcp{4,6}_l2_buf_used are set to zero by tcp_l2_data_buf_flush(), repeat that explicitly here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp, tcp_splice: False "Negative array index read" positives, CWE-129Stefano Brivio2022-04-072-12/+24
| | | | | | A flag or event bit is always set by callers. Reported by Coverity. Signed-by-off: Stefano Brivio <sbrivio@redhat.com>
* tcp_splice: Logically dead code, CWE-561Stefano Brivio2022-04-071-7/+1
| | | | | | Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: Dereference null return value, CWE-476Stefano Brivio2022-04-071-1/+1
| | | | | | Not an issue with a sane kernel behaviour. Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, tap: False "Buffer not null terminated" positives, CWE-170Stefano Brivio2022-04-072-6/+6
| | | | | | | Those strings are actually guaranteed to be NULL-terminated. Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf: False "Assign instead of compare" positive, CWE-481Stefano Brivio2022-04-071-1/+1
| | | | | | | This really just needs to be an assignment before line_read() -- turn it into a for loop. Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Argument cannot be negative, CWE-687Stefano Brivio2022-04-074-22/+30
| | | | | | Actually harmless. Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Improper use of negative value (CWE-394)Stefano Brivio2022-04-071-5/+14
| | | | | | Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* conf, packet: Operands don't affect result, CWE-569Stefano Brivio2022-04-072-3/+8
| | | | | | Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tap: Resource leak, CWE-404Stefano Brivio2022-04-071-1/+4
| | | | | | Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Unchecked return value from library, CWE-252Stefano Brivio2022-04-078-55/+116
| | | | | | | All instances were harmless, but it might be useful to have some debug messages here and there. Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* tcp: False "Untrusted loop bound" positive, CWE-606Stefano Brivio2022-04-051-0/+2
| | | | | | | | Field doff in struct tcp_hdr is 4 bits wide, so optlen in tcp_tap_handler() is already bound, but make that explicit. Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt: Ignoring number of bytes read, CWE-252Stefano Brivio2022-04-051-2/+3
| | | | | | Harmless, assuming sane kernel behaviour. Reported by Coverity. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* treewide: Invalid type in argument to printf format specifier, CWE-686Stefano Brivio2022-04-054-32/+32
| | | | | | Harmless except for two bad debugging prints. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* passt.1, qrap.1: Update links to qemu out-of-tree patchStefano Brivio2022-04-012-2/+2
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* README: Fix link to contrib/debianStefano Brivio2022-03-301-1/+1
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* hooks: Copy .webp diagram versions tooStefano Brivio2022-03-301-0/+1
| | | | Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* README: Drop red notice about early development phaseStefano Brivio2022-03-301-3/+1
| | | | | | Last famous words: it should be tested enough by now. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
* contrib: Add example of Debian package filesStefano Brivio2022-03-307-1/+66
| | | | | | | ...using dh_apparmor to ship and apply AppArmor profiles. Tried on current Debian testing (Bookworm, 12). Signed-off-by: Stefano Brivio <sbrivio@redhat.com>