aboutgitcodebugslistschat
path: root/passt.c
diff options
context:
space:
mode:
authorStefano Brivio <sbrivio@redhat.com>2021-10-14 13:07:32 +0200
committerStefano Brivio <sbrivio@redhat.com>2021-10-14 13:20:34 +0200
commit2e6e29a7577a45c2723080d2acd1621df6402831 (patch)
tree539d2c2bac62c25be1035886c4f417d2660ee1a5 /passt.c
parent3c6d24dd3021bb294a7aa182a95a9cb868ca6cb4 (diff)
downloadpasst-2e6e29a7577a45c2723080d2acd1621df6402831.tar
passt-2e6e29a7577a45c2723080d2acd1621df6402831.tar.gz
passt-2e6e29a7577a45c2723080d2acd1621df6402831.tar.bz2
passt-2e6e29a7577a45c2723080d2acd1621df6402831.tar.lz
passt-2e6e29a7577a45c2723080d2acd1621df6402831.tar.xz
passt-2e6e29a7577a45c2723080d2acd1621df6402831.tar.zst
passt-2e6e29a7577a45c2723080d2acd1621df6402831.zip
slirp4netns.sh: Introduce compatibility wrapper behaving like slirp4netns(1)
Warning: draft quality, not really tested, --enable-sandbox not supported yet. Example: $ unshare -rUn # echo $$ 3130879 $ ./slirp4netns.sh -m 65520 -c 3130879 tap0 sent tapfd=5 for tap0 received tapfd=5 Starting slirp * MTU: 65520 * Network: 10.0.2.0 * Netmask: 255.255.255.0 * Gateway: 10.0.2.2 * DNS: 10.0.2.3 * Recommended IP: 10.0.2.100 WARNING: 127.0.0.1:* on the host is accessible as 10.0.2.2 (set --disable-host-loopback to prohibit connecting to 127.0.0.1:*) # ip li sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 33: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65520 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 1000 link/ether 5e:9d:a0:c5:cf:67 brd ff:ff:ff:ff:ff:ff # ip ad sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 33: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65520 qdisc pfifo_fast state UNKNOWN group default qlen 1000 link/ether 5e:9d:a0:c5:cf:67 brd ff:ff:ff:ff:ff:ff inet 10.0.2.0/24 scope global tap0 valid_lft forever preferred_lft forever inet6 fe80::5c9d:a0ff:fec5:cf67/64 scope link valid_lft forever preferred_lft forever # ip ro sh default via 10.0.2.2 dev tap0 10.0.2.0/24 dev tap0 proto kernel scope link src 10.0.2.0 root@epycfail:~# ip -6 ro sh fe80::/64 dev tap0 proto kernel metric 256 pref medium # iperf3 -c 10.0.2.2 -l1M Connecting to host 10.0.2.2, port 5201 [ 5] local 10.0.2.0 port 43014 connected to 10.0.2.2 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.38 GBytes 11.8 Gbits/sec 0 9.96 MBytes [ 5] 1.00-2.00 sec 1.59 GBytes 13.6 Gbits/sec 0 13.3 MBytes [ 5] 2.00-3.00 sec 1.63 GBytes 14.0 Gbits/sec 0 13.3 MBytes [ 5] 3.00-4.00 sec 1.78 GBytes 15.3 Gbits/sec 0 13.3 MBytes [ 5] 4.00-5.00 sec 1.80 GBytes 15.5 Gbits/sec 0 15.8 MBytes [ 5] 5.00-6.00 sec 1.69 GBytes 14.5 Gbits/sec 0 15.8 MBytes [ 5] 6.00-7.00 sec 1.65 GBytes 14.2 Gbits/sec 0 15.8 MBytes [ 5] 7.00-8.00 sec 1.68 GBytes 14.4 Gbits/sec 0 15.8 MBytes [ 5] 8.00-9.00 sec 1.60 GBytes 13.7 Gbits/sec 0 15.8 MBytes [ 5] 9.00-10.00 sec 1.66 GBytes 14.3 Gbits/sec 0 15.8 MBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 16.5 GBytes 14.1 Gbits/sec 0 sender [ 5] 0.00-10.01 sec 16.4 GBytes 14.1 Gbits/sec receiver iperf Done. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Diffstat (limited to 'passt.c')
0 files changed, 0 insertions, 0 deletions